Description
Core Product Summary
The CCC TIOC-555HD is an I/O processor transition module for the Compressor Controls Corporation (CCC) Series 5 Vanguard control system. It provides the field-termination assembly (FTA) connections for the IOC-555-S simplex and IOC-555-D duplex I/O processor cards.
The module supports both local I/O and high-density I/O (HDIO) configurations and is installed in the Vanguard chassis behind the corresponding IOC-555 card position. It replaces the earlier TIOC-555 transition module.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Compressor Controls Corporation (CCC) |
| Model number | TIOC-555HD |
| Product type | I/O processor transition module |
| Control-system family | CCC Series 5 Vanguard |
| Compatible I/O processor cards | IOC-555-S simplex I/O processor card; IOC-555-D duplex I/O processor card |
| I/O configuration support | Local I/O and high-density I/O (HDIO) |
| Primary function | Provides FTA connections for the corresponding IOC-555 card position |
| Mounting position | Rear transition-module position in the Vanguard chassis |
| Predecessor module | TIOC-555 |
| Associated part number | 17-505555 |
Engineering Selection Highlights
- The TIOC-555HD is a transition module, not the I/O processor card itself; it must be paired with the appropriate IOC-555-S or IOC-555-D card in the same card position.
- It supports both simplex IOC-555-S and duplex IOC-555-D processor cards, so the installed card type determines the required system configuration.
- The module provides field-termination assembly connections, making it the physical interface between the IOC-555 card and the system’s field wiring.
- Its support for local and HDIO configurations allows the Vanguard I/O arrangement to be matched to the installed I/O density.
- The TIOC-555HD replaces the earlier TIOC-555, so replacement planning should confirm chassis revision and compatibility with the installed IOC-555 card.
- In a Vanguard Duplex chassis, FTA connections are located on each TIOC card, including the TIOC-555HD.

TIOC-555HD

TIOC-555HD
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Control system | CCC Series 5 Vanguard | The TIOC-555HD is a Vanguard I/O transition module. |
| Simplex I/O processor | -S | The module provides FTA connections for a simplex IOC-555-S card position. |
| Duplex I/O processor | -D | The module provides FTA connections for a duplex IOC-555-D card position. |
| I/O configuration | Local I/O and HDIO | The module supports both local and high-density I/O arrangements. |
| Chassis location | Rear transition-module position | The TIOC-555HD is installed behind the corresponding IOC-555 card. |
| Field wiring | FTA connections on the TIOC module | Field terminations are made through the transition module rather than directly on the IOC-555 card. |
| Earlier module | TIOC-555 | The TIOC-555HD replaces the TIOC-555. |
Dimensions, Mounting & Connection Notes
The TIOC-555HD is a rear-mounted transition module in the CCC Series 5 Vanguard chassis. It occupies the transition-module position associated with an IOC-555-S or IOC-555-D I/O processor card and provides the FTA connections for that card position.
The module supports local I/O and high-density I/O configurations. Its function is to carry field connections from the Vanguard chassis to the applicable field-termination assemblies, while the IOC-555 card performs the I/O processing function.
Detailed Product Overview
The CCC TIOC-555HD is the I/O processor transition module used in CCC’s Series 5 Vanguard turbomachinery control platform. Its role is to provide the field-termination assembly connections required by an IOC-555 I/O processor card in the same chassis position. It is therefore part of the physical I/O interface layer, rather than the I/O processing card itself.
The module supports both the IOC-555-S simplex I/O processor card and the IOC-555-D duplex I/O processor card. This makes the TIOC-555HD applicable to Vanguard systems configured for either simplex or duplex I/O operation. In a Vanguard Duplex chassis, the system documentation identifies the TIOC-555HD as the card providing FTA connections at each TIOC position.
The TIOC-555HD supports both local I/O and high-density I/O (HDIO) configurations. This distinguishes it from a transition module intended only for a single local-I/O arrangement and makes it relevant where the Vanguard system uses higher-density I/O wiring architectures.
The TIOC-555HD replaces the earlier TIOC-555 transition module. For maintenance or spare-part planning, this relationship is important: the HD version is the later transition-module designation, but the installed chassis revision and IOC-555 card type should still be matched to the module before substitution.
The associated CCC part number is 17-505555. The module is identified in Vanguard system documentation as a rear Series 5 Vanguard I/O transition module, providing FTA connections for the corresponding IOC-555-D card position. Its practical role is to carry the field-wiring interface from the chassis to the applicable field-termination hardware while preserving the separation between the I/O processor card and field terminations.
Applications & System Role
Within a CCC Series 5 Vanguard control system, the TIOC-555HD forms part of the I/O signal path between the IOC-555 I/O processor card and the field-termination assemblies. The IOC-555-S or IOC-555-D card handles the I/O processing function, while the TIOC-555HD provides the physical transition and FTA connection point.
The module is used in Vanguard simplex and duplex control-system configurations. In a duplex arrangement, the Vanguard chassis uses IOC-555-D I/O processor cards, and each TIOC card provides the FTA connections for its corresponding card position.
FAQ
What is the CCC TIOC-555HD?
The CCC TIOC-555HD is an I/O processor transition module for the CCC Series 5 Vanguard control system.
Which I/O cards does the TIOC-555HD support?
It provides FTA connections for the IOC-555-S simplex I/O processor card and the IOC-555-D duplex I/O processor card.
Does the TIOC-555HD perform I/O processing?
No. It is the transition module that provides the field-termination assembly connections; the IOC-555-S or IOC-555-D card performs the I/O processing function.
What I/O configurations does it support?
It supports both local I/O and high-density I/O (HDIO) configurations.
Where is the TIOC-555HD installed?
It is installed in the rear transition-module position of a CCC Series 5 Vanguard chassis, behind the corresponding IOC-555 card position.
What module does the TIOC-555HD replace?
It replaces the earlier CCC TIOC-555 transition module.
What is the associated CCC part number?
The TIOC-555HD is associated with CCC part number 17-505555.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626