Sale!

ELAU ISH1003002500000000100 iSH100 Servo Motor

  • Model: ISH1003002500000000100
  • Brand: ELAU / Schneider Electric
  • Series: iSH100
  • Core Function: Precision servo motion for machine axes
  • Product Type: Synchronous servo motor
  • Key Specs: 100 mm frame class; 30 Nm-class configuration; PacDrive application
  • Configuration: Exact option code must be matched before replacement
Categories: , , , , SKU: ISH1003002500000000100 Brand:

Description

Key Technical Specifications

Parameter Value
Manufacturer ELAU
Parent Brand Schneider Electric
Model ISH1003002500000000100
Product Family iSH100
Product Type Synchronous servo motor
Frame Size 100 mm class
Configuration 30025
Torque Class Approximately 30 Nm, subject to exact motor variant
Application PacDrive machine automation and servo motion
Feedback Configuration-dependent; verify nameplate/datasheet
Holding Brake Configuration-dependent
Shaft/Seal Configuration-dependent
Cooling Configuration-dependent
Motor Cable Use the cable specified for the exact motor configuration
Controller Compatibility Verify with the installed ELAU/Schneider Electric PacDrive system

A current third-party listing specifically identifies ELAU ISH1003002500000000100 as an iSH100/30025 synchronous servo motor within the Schneider Electric ELAU PacDrive family. It also identifies the 100 mm frame class and approximately 30 Nm torque class.

Important: I would not treat every detailed option as confirmed from the long ordering code alone. The exact feedback device, brake, shaft configuration, sealing arrangement, and electrical ratings should be verified against the motor nameplate or original ELAU documentation before substitution.

 

Product Introduction

The ELAU ISH1003002500000000100 is an iSH100-series synchronous servo motor for precision motion applications in ELAU PacDrive systems. The model belongs to the 100 mm frame class and the 30025 configuration, which is associated with approximately 30 Nm torque-class operation.

This motor is suited to machine axes where controlled position, speed, and torque are required. Typical applications include packaging machinery, rotary tables, filling equipment, press-feed mechanisms, and other automated production equipment. Exact feedback, brake, shaft, and sealing options must be matched when replacing an installed motor.

ISH1003002500000000100

ISH1003002500000000100

ISH1003002500000000100

ISH1003002500000000100

Installation & Configuration Guide

Stage 1: Pre-Installation Preparation — approximately 10 minutes

  1. Confirm the complete model: ISH1003002500000000100.
  2. Record the existing motor nameplate information, including serial number and electrical ratings.
  3. Notify operations and place the machine in a safe maintenance state.
  4. Apply the plant’s lockout/tagout (LOTO) procedure.
  5. Allow the servo drive DC bus to discharge according to the drive manufacturer’s specified waiting period.
  6. Photograph:
    • Motor connector orientation
    • Power and feedback connections
    • Shaft/coupling arrangement
    • Motor mounting position
    • Existing drive configuration
  7. Back up the PacDrive application and record motor/axis parameters before removal.

⚠️ Do not assume that another ISH100 motor is a direct replacement. Feedback, brake, shaft, winding, and mechanical options can change between configurations.

Stage 2: Removing the Existing Motor — approximately 10 minutes

  1. Verify that the servo drive is de-energized.
  2. Confirm the DC bus voltage is at the safe level specified by the drive manufacturer.
  3. Label all power, feedback, brake, and auxiliary connections.
  4. Disconnect the motor cables without pulling on the connectors.
  5. Remove the coupling or mechanical transmission connection.
  6. Support the motor before removing its mounting bolts.
  7. Remove the motor without forcing the shaft or coupling.
  8. Inspect the coupling, shaft, mounting flange, and machine-side bearings.

⚠️ Keep the old motor available until the replacement has completed commissioning.

Stage 3: Installing the New Motor — approximately 10 minutes

  1. Compare the replacement nameplate with the removed motor.
  2. Verify the complete part number: ISH1003002500000000100.
  3. Confirm the flange, shaft dimensions, mounting pattern, and connector arrangement.
  4. Install the motor without applying excessive radial or axial force to the shaft.
  5. Align the coupling according to the machine manufacturer’s requirements.
  6. Tighten mounting hardware using the applicable torque specification.
  7. Connect the specified motor power and feedback cables.
  8. Connect the brake circuit if the installed configuration uses a holding brake.
  9. Verify protective grounding.
  10. Do not substitute an incompatible feedback cable simply because the connector appears identical.

Stage 4: Power-On & Commissioning — approximately 10–20 minutes

  1. Recheck all motor and drive connections.
  2. Restore power according to the PacDrive commissioning procedure.
  3. Check the servo drive for startup or encoder faults.
  4. Verify that the controller identifies the expected motor configuration.
  5. Confirm motor direction before coupling the axis to a production load where practical.
  6. Perform a low-speed jog.
  7. Check actual position, commanded position, and following error.
  8. Verify acceleration and deceleration behavior.
  9. Test the holding brake if fitted.
  10. Run the axis through its normal operating range under controlled conditions.
  11. Do not immediately return the machine to automatic production after a motor replacement. First verify homing, limits, interlocks, and emergency-stop behavior.

 

Frequently Asked Questions (FAQ)

Is ISH1003002500000000100 a servo motor?

Yes. Available product information identifies it as an ELAU iSH100/30025 synchronous servo motor in the PacDrive family.

Is ELAU part of Schneider Electric?

Yes. ELAU products are associated with Schneider Electric’s motion-control and PacDrive portfolio. When purchasing replacement parts, you may therefore encounter both ELAU and Schneider Electric references.

What does the 30025 configuration indicate?

Available technical information associates the 30025 configuration with the approximately 30 Nm torque class within the iSH100 family. The exact continuous and peak ratings should still be confirmed from the specific motor documentation.

Can I replace it with another ISH100 motor?

Not without checking the complete configuration. A matching frame size is not enough. Feedback type, brake, shaft configuration, winding, connector arrangement, and other options can affect compatibility.

Will I need to change the PacDrive program after replacing the motor?

Not necessarily, but the axis configuration must be verified. The replacement motor should match the motor data expected by the installed PacDrive system. After replacement, check encoder feedback, direction, scaling, current/torque behavior, limits, and homing.

What should I verify before purchasing this motor?

At minimum, provide the supplier with a clear photograph of the existing ELAU nameplate and the complete part number. Also verify the feedback type, brake option, shaft dimensions, flange, motor winding, and cable/connector configuration. This prevents a visually similar iSH100 motor from being supplied as a substitute.

Is new or refurbished?

The part number itself does not establish physical condition. The supplier should explicitly state Factory Sealed, New Original/New Surplus, or Refurbished and Tested. For used or refurbished servo motors, request encoder and insulation test results before installation.