Description
Core Product Summary
The ELAU SM070-60-010-P0-45-S1-B0 is a synchronous AC servo motor from the SM-70 family of the ELAU PacDrive SM motor series, the motion portfolio of ELAU that is now part of Schneider Electric’s automation offering. It is built as a permanent-field synchronous machine with low rotor inertia, designed for highly dynamic positioning tasks, and forms the rotary-axis drive side of PacDrive servo systems.
The model designation defines its exact configuration: a 70 mm flange size, a rated speed of 6000 rpm, and a 1.0 Nm rated torque, with a smooth (feather-groove-free) shaft for frictional torque transmission, SinCos single-turn position feedback including an electronic nameplate read out during commissioning, and no holding brake. Power and feedback are routed through a connection box. The motor operates with approximately 1.43 A rated current on a 400 V drive output and is intended to be paired with PacDrive motor controllers as one complete servo axis.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Permanent-field synchronous AC servo motor |
| Series / family | ELAU PacDrive SM-70 (SM servo motor series) |
| Flange size | 70 mm |
| Rated torque (per model designation) | 1.0 Nm |
| Rated speed | 6000 rpm |
| Rated current | approx. 1.43 A |
| Rated voltage (drive output) | 400 V |
| Feedback system | SinCos encoder, single-turn, with electronic nameplate |
| Shaft version | Smooth shaft (no feather groove), frictional torque transmission |
| Holding brake | None (B0) |
| Power and feedback connections | Via connection box |
| Insulation class | F |
| Protection class | IP64 (shaft side) / IP65 (surface and connection box) |
| Mounting positions | IM B5, IM V1, IM V3 (flange mounting) |
| Order number reference | 19202602-501 |
Engineering Selection Highlights
- Exact-configuration identification: the model code itself encodes the electrical and mechanical configuration (70 mm flange, 6000 rpm, 1.0 Nm), so a unit whose nameplate matches this full string can be confirmed as the correct replacement without measuring motor data.
- Smooth shaft (P0): torque must be transferred by frictional connection (e.g., a clamping element), not a keyway; coupling selection must match a plain shaft.
- SinCos single-turn feedback (S1): the motor relies on sine/cosine commutation and position feedback with an electronic nameplate, which the PacDrive motor controller reads during commissioning — verify that the drive configuration supports SinCos single-turn motors rather than resolver or multiturn variants.
- No holding brake (B0): axes that must retain position when power is removed need an external holding arrangement; this variant provides none.
- 400 V drive output, approx. 1.43 A rated current: the motor controller for this axis must be dimensioned for the corresponding voltage class and current range.
- Connection box wiring: both power and feedback are led through the motor connection box, so cable planning must provide separate motor and encoder cable runs to the drive cabinet.

SM070-60-010-P0-45-S1-B0

SM070-60-010-P0-45-S1-B0
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Motion system | PacDrive servo/motion system (ELAU) | Operates as the motor of a PacDrive servo axis |
| Servo electronics | PacDrive motor controller / servo drive | Motor commutation and positioning are handled by the drive; the motor does not run on mains voltage directly |
| Feedback interface | SinCos single-turn encoder with electronic nameplate | Drive reads motor data automatically during commissioning |
| Power and feedback cabling | Routed via motor connection box | Separate motor power and encoder feedback cables required |
| Shaft coupling | Frictional connection only (smooth shaft) | Keyed couplings cannot be used; select a clamping-type hub |
| Mounting | Flange mounting, IM B5 / IM V1 / IM V3 | Vertical and wall mounting positions supported |
Detailed Product Overview
The SM-70 motor family was developed by ELAU specifically for PacDrive motion systems, which integrate PLC, motion, and robotics control on one platform. Within that platform, this motor represents the smallest flange size of the SM series, intended for auxiliary and high-speed axes rather than main drive duty. Its design goal is dynamic response: the permanent-magnet synchronous rotor keeps the mass moment of inertia low so that the axis accelerates quickly for a given drive current, and the sinusoidal EMF of the winding design supports smooth low-current operation from the PacDrive motor controller.
For an engineer specifying or replacing this axis, three properties deserve attention. First, the feedback variant is SinCos single-turn with an electronic nameplate: the motor controller identifies the motor’s electrical data automatically during commissioning, which reduces configuration errors, but it also means the replacement motor must match the encoder variant — a resolver (R1) or multiturn (M1) variant is not interchangeable at the drive configuration level. Second, the shaft is the smooth P0 version: torque transmission is by friction only, so the machine’s coupling or belt pulley must grip the shaft by clamping force, and a key-based transmission cannot be realized on this variant. Third, the B0 suffix confirms there is no spring-applied holding brake, so any vertical axis or position-holding requirement must be handled by the mechanics or by the drive’s control, not by the motor itself.
Electrically, the motor is rated at approximately 1.43 A on a 400 V drive output at 6000 rpm, placing it at the lower end of the PacDrive motor power range. It is driven exclusively through a matching PacDrive motor controller, which supplies the sinusoidal current system synchronized to rotor position using the encoder feedback. Power and feedback are both terminated in the motor connection box, so installations should plan motor and encoder cables with the appropriate shields and separation. The motor reaches IP64 at the shaft side and IP65 at the surface and connection box, with insulation class F, allowing standard industrial machine environments within the mounting positions IM B5, IM V1, and IM V3.
Because the full model string encodes flange size, speed, torque, shaft version, voltage class, feedback type, and brake status, procurement can verify a candidate unit by nameplate comparison alone. This is particularly useful when sourcing spares for existing PacDrive machines, where a mismatch in any single code element — for instance, substituting a keyed P1 shaft or a braked B1 variant — changes the mechanical or electrical interface of the axis.
Applications & System Role
Within a PacDrive machine architecture, the SM070-60-010-P0-45-S1-B0 serves as the rotary actuator of a centrally controlled servo axis: the PacDrive controller executes the motion profile, the motor controller converts it into sinusoidal phase currents, and this motor converts those currents into precise rotary motion with position and velocity fed back through its SinCos encoder.
Its characteristics — a small 70 mm flange, 1.0 Nm continuous torque at 6000 rpm, low rotor inertia, and no holding brake — make it a fit for fast, lightly loaded rotary axes where high acceleration and continuous speed matter more than holding force, for example indexing or positioning elements in packaging and general automation machinery built on PacDrive motion platforms. The electronic nameplate allows the drive to adopt motor parameters automatically, which simplifies axis replacement and commissioning in existing machines.
FAQ
What is the ELAU SM070-60-010-P0-45-S1-B0?
It is an SM-70 series synchronous AC servo motor from the ELAU PacDrive SM motor range, now part of Schneider Electric’s motion portfolio.
What are its key ratings?
The model designation specifies a 70 mm flange, 1.0 Nm rated torque, and 6000 rpm rated speed; corroborating documentation lists approximately 1.43 A rated current at a 400 V drive output.
What does each part of the model code mean?
The code defines flange size (070 = 70 mm), rated speed (60 = 6000 rpm), rated torque (010 = 1.0 Nm), shaft version (P0 = smooth shaft without feather groove), SinCos single-turn feedback (S1), and no holding brake (B0).
Which feedback system does it use?
A SinCos single-turn encoder with an electronic nameplate, which the PacDrive motor controller reads automatically during commissioning.
Does it have a holding brake?
No. The B0 suffix means no holding brake; axes requiring position retention without power need an external holding arrangement.
How is torque transmitted from the shaft?
Through a frictional connection on the smooth shaft; this variant has no feather groove, so key-based couplings cannot be used.
Which drive does it need?
It operates as part of a PacDrive servo axis driven by a matching PacDrive motor controller; it is not connected directly to the supply network.
How are power and feedback cables connected?
Both motor power and encoder feedback are routed through the motor’s connection box.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626