Description
Core Product Summary
The Emerson SE4005S2B1 is a DeltaV S-series Traditional I/O analog output card assembly that delivers eight channels of 4-20 mA HART output together with a standard 8-channel terminal block. It converts control-system commands into accurate analog signals for valves, positioners, and other modulating field devices.
Each channel is optically isolated from the system, supports HART pass-through communication, and provides open-loop detection. The card operates across a full signal range of 1 to 23 mA, offers 14-bit resolution, and requires no field calibration. Local-bus current and field-circuit power consumption are specified for both simplex and redundant installations.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | Analog Output Card (4-20 mA HART) |
| Model | SE4005S2B1 |
| Number of channels | 8 |
| Output signal | 4 to 20 mA (HART) |
| Full signal range | 1 to 23 mA |
| Accuracy | 0.25 % of span (–40 to 60 °C); 0.4 % of span (60 to 70 °C) |
| Resolution | 14-bit D/A converter |
| Calibration | None required |
| Local bus current (12 V DC) | Simplex: 120 mA typ. / 150 mA max.; Redundant: 175 mA typ. / 250 mA max. |
| Field circuit power per card | 300 mA maximum at 24 V DC (±10 %) |
| Isolation | Optical isolation per channel, factory tested to 1500 V DC |
| Output compliance | 20 mA at 21.6 V DC into 700 Ω load |
| Open-loop detection | < 0.70 mA |
| HART scan time | 600–800 ms typical per enabled channel |
| Terminal block | Standard 8-channel terminal block |
| Optional fuse | 2.0 A (terminal-block option) |
Engineering Selection Highlights
- Eight independent 4-20 mA HART channels support modulating control of valves and actuators with digital HART communication for diagnostics and configuration.
- Optical isolation of each channel from the system (tested to 1500 V DC) protects the controller from field-side faults.
- 14-bit resolution and specified accuracy over the full operating temperature range ensure precise output control.
- Open-loop detection below 0.70 mA allows the system to recognize broken field wiring or failed devices.
- Standard 8-channel terminal block simplifies field wiring; a fused variant (SE4005S2B2) is available when channel-level protection is required.
- HART pass-through enables AMS Device Manager access and HART variable/status reporting directly into control strategies.

SE4005S2B1

SE4005S2B1
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System platform | Emerson DeltaV S-series | Traditional I/O subsystem |
| Carrier | S-series I/O interface carrier | Installs in any available I/O slot |
| Terminal block | Standard 8-channel terminal block (included) | Keyed to accept only matching replacement cards |
| Redundant configuration | Supported via SE4035S2B1 assembly | Uses two AO cards with redundant terminal block |
| Field devices | 4-20 mA HART valves, positioners, and actuators | HART communication supported for diagnostics and configuration |
| Power | Local bus 12 V DC; field circuit 24 V DC | Field power limited to 300 mA per card |
Dimensions, Mounting & Connection Notes
The SE4005S2B1 is a standard S-series I/O interface consisting of the analog-output card and its matching 8-channel terminal block. It mounts on an S-series I/O interface carrier. The terminal block is keyed so that only a compatible card can be inserted after the terminal block is installed. Field wiring is connected to the screw terminals of the 8-channel terminal block. An optional fused terminal block (2.0 A) is available under the related model SE4005S2B2.
Detailed Product Overview
The Emerson SE4005S2B1 is an eight-channel analog-output assembly for the DeltaV S-series Traditional I/O family. It combines a 4-20 mA HART output card with a standard 8-channel terminal block, forming a complete, keyed I/O interface that plugs directly into an S-series carrier.
Each channel produces a continuously variable 4-20 mA signal (full range 1–23 mA) with 14-bit resolution. Accuracy is specified at 0.25 % of span from –40 °C to 60 °C and 0.4 % of span from 60 °C to 70 °C. No field calibration is required; calibration data are stored on the card. Optical isolation between each field channel and the system (factory-tested to 1500 V DC) protects the controller from external faults. Open-loop detection below 0.70 mA provides immediate indication of broken wiring or failed field devices.
HART communication is fully supported. The card provides HART pass-through for AMS Device Manager and reports HART variables and status into DeltaV control modules. Typical HART scan time is 600–800 ms per enabled channel. Local-bus current consumption is 120 mA typical (150 mA maximum) in simplex mode and correspondingly higher in redundant mode. Field-circuit power is limited to 300 mA at 24 V DC for the entire card. Output compliance allows 20 mA into a 700 Ω load at 21.6 V supply voltage.
Installation follows the standard S-series procedure: the terminal block is mounted and keyed first; the card is then inserted and automatically sensed by the controller. A fused terminal-block version (SE4005S2B2) is available when individual channel fusing is required. For higher availability a redundant pair can be ordered as SE4035S2B1.
The SE4005S2B1 therefore provides a compact, accurate, and HART-capable analog-output solution for DeltaV process control applications that require reliable modulating control and integrated device diagnostics.
Applications & System Role
The SE4005S2B1 functions as an analog-output interface within DeltaV S-series Traditional I/O subsystems. It generates precise 4-20 mA signals for final control elements such as control valves, dampers, and variable-speed drives, while simultaneously supporting HART digital communication for device diagnostics, configuration, and variable reporting.
Channels operate independently and can be used in both simplex and redundant configurations. The card is typically applied in continuous process control loops where accurate analog output and HART-enabled asset management are required.
FAQ
What is the Emerson SE4005S2B1?
It is a DeltaV S-series Traditional I/O analog output card assembly providing eight 4-20 mA HART channels with a standard 8-channel terminal block.
How many channels does it have and what signal does it produce?
It has eight channels that generate 4-20 mA signals (full range 1–23 mA) with HART digital communication.
What is the accuracy of the outputs?
Accuracy is 0.25 % of span from –40 °C to 60 °C and 0.4 % of span from 60 °C to 70 °C.
Does the card support HART?
Yes. It supports HART pass-through for AMS Device Manager and reports HART variables and status into control strategies. Typical scan time is 600–800 ms per enabled channel.
Is channel isolation provided?
Yes. Each channel is optically isolated from the system and factory-tested to 1500 V DC.
What terminal block is included?
The SE4005S2B1 includes the standard 8-channel terminal block. A fused version is available as SE4005S2B2.
Is redundant operation supported?
Yes. A redundant assembly is ordered as SE4035S2B1 (two AO cards with redundant terminal block).

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626