Description
Core Product Summary
The Emerson VE4003S2B4 is a 16-pin mass termination block for the DeltaV M-series Traditional I/O subsystem. It provides the field-wiring interface for the 8-channel 4-20 mA HART analog input card.
This termination block mates with the corresponding Series 2 AI card and supports 2-wire device connections through the 16-pin mass termination interface. It is ordered as part of the analog input card and terminal block combinations listed in the M-series Traditional I/O product data and is intended for use on DeltaV systems running version 10.3.1 or later.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | 16-Pin Mass Termination Block |
| System Family | DeltaV M-series Traditional I/O |
| Associated Card | 8-channel 4-20 mA HART Analog Input |
| Termination Interface | 16-pin mass termination |
| Device Support | 2-wire devices |
| Software Support | DeltaV v10.3.1 and later |
| Common Form Factor (I/O interface) | H 10.7 cm × W 4.1 cm × D 10.5 cm |
| Operating Temperature (family) | –40 °C to +70 °C |
| Storage Temperature (family) | –40 °C to +85 °C |
| Relative Humidity (family) | 5 % to 95 %, non-condensing |
| Protection Rating (family) | IP20 |
| Airborne Contaminants (family) | ISA-S71.04 Class G3, conformal coating |
Engineering Selection Highlights
- Exact match for the 8-channel 4-20 mA HART AI card in M-series Traditional I/O ensures correct keying and electrical interface.
- 16-pin mass termination design supports 2-wire field devices and connection to approved mass connection solutions or third-party wiring assemblies.
- Requires DeltaV software version 10.3.1 or later for full support of the associated Series 2 AI hardware.
- Mounts on the standard M-series I/O interface carrier; confirm carrier type (horizontal or VerticalPlus) and controller compatibility (MQ, MX or PK).
- Keying mechanism prevents incorrect card-to-block pairing during installation or replacement.
- Suitable for simplex configurations; redundant arrangements use different terminal block order numbers.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System / Family | DeltaV M-series Traditional I/O | Requires M-series carriers and compatible controllers |
| Controllers | MQ, MX or PK | S-series controllers may share the Area Control Network on later software versions but use different I/O hardware |
| Carrier | M-series horizontal or VerticalPlus | Not interchangeable with S-series carriers |
| Associated Card | 8-channel 4-20 mA HART AI (key position A1) | Card and block must match for proper keying |
| Termination Interface | 16-pin mass termination | Supports connection to M-series Mass Connection Solutions or approved third-party assemblies |
| Software | DeltaV v10.3.1 and later | Earlier versions require a different card revision |
| Device Wiring | 2-wire 4-20 mA HART | 4-wire support requires the 24-pin mass termination variant |
Dimensions, Mounting & Connection Notes
The I/O interface components share a common form factor of approximately 10.7 cm height × 4.1 cm width × 10.5 cm depth. The termination block mounts on the M-series I/O interface carrier. Field wiring is connected via the 16-pin mass termination interface. Installation follows the keying rules and carrier mounting practices defined for M-series Traditional I/O. Environmental limits match the family ratings listed above. Confirm exact mechanical fit and wiring practices against the current installation documentation for the installed system revision.

VE4003S2B4

VE4003S2B4
Detailed Product Overview
The Emerson VE4003S2B4 is the designated 16-pin mass termination block for the 8-channel 4-20 mA HART analog input card in the DeltaV M-series Traditional I/O family. In the modular Traditional I/O architecture, the I/O card and its matching terminal block form a complete interface that plugs into a DIN-rail-mounted carrier. The mass termination style allows field wiring to be brought to the block via a multi-pin connector rather than individual screw terminals for every channel, which simplifies installation when using mass connection boards or pre-assembled cable assemblies.
This block is specifically listed for the 8-channel AI card and is intended to support 2-wire field devices. The corresponding 24-pin mass termination block is used when 4-wire devices are required. Keying on both the card and the terminal block ensures that only the correct combination can be installed, reducing the risk of mismatch during commissioning or maintenance.
The termination block is ordered under the VE4003S2B4 model number as part of the official Analog Input Cards and Termination Blocks table. It is supported on DeltaV software version 10.3.1 and later. For systems running earlier software or requiring specific marine certifications, the documentation notes that a different card hardware revision may be requested.
Because the block is part of the Traditional I/O subsystem, it inherits the common environmental ratings of the family: operating temperature from –40 °C to +70 °C, storage to +85 °C, IP20 protection, and compliance with ISA-S71.04 Class G3 for airborne contaminants with conformal coating applied to the associated electronics. Mechanical dimensions follow the standard I/O interface form factor used across M-series cards and blocks.
Selection of the VE4003S2B4 is appropriate when the project specifies mass termination for an 8-channel 4-20 mA HART AI point count on M-series hardware. Confirm the exact carrier type, controller model, software version, and whether simplex or redundant I/O is required, as redundant configurations use different terminal-block order numbers. Always verify the physical keying and connector orientation against the installed hardware before energizing the system.
Applications & System Role
The VE4003S2B4 functions as the field-side termination interface for an 8-channel analog input card within the DeltaV M-series Traditional I/O architecture. It provides the physical connection point between the AI card and field transmitters or other 4-20 mA HART devices, enabling signal acquisition and HART pass-through while supporting mass-termination wiring methods that reduce individual wire terminations. Typical use is in control cabinets or field junction boxes where modular Traditional I/O is installed near the process.
FAQ
What is the Emerson VE4003S2B4?
It is the 16-pin mass termination block ordered for the 8-channel 4-20 mA HART analog input card in the DeltaV M-series Traditional I/O family.
Which system does the VE4003S2B4 belong to?
It belongs to the DeltaV M-series Traditional I/O subsystem and is used with compatible M-series carriers and controllers.
What card does the VE4003S2B4 mate with?
It mates with the 8-channel 4-20 mA HART analog input card (key position A1).
What type of field devices does it support?
It supports 2-wire 4-20 mA HART devices through the 16-pin mass termination interface.
What software version is required?
DeltaV version 10.3.1 and later. Earlier versions require a different card hardware revision.
Can the VE4003S2B4 be used for 4-wire devices?
No. The 24-pin mass termination block (VE4003S2B5) is specified for 4-wire device support with the same AI card family.
What is the typical mounting method?
The block mounts on an M-series I/O interface carrier (horizontal or VerticalPlus) that is itself mounted on DIN rail.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626