Sale!

Emerson VE4035S2B1 DeltaV M-series Fused I/O Termination Block

Parameter Specification
Manufacturer Emerson
Model / order number VE4035S2B1
Product type Fused I/O termination block
Control system family Emerson DeltaV M-series traditional I/O
Compatible I/O card 8-channel, 4–20 mA HART analog output card
Field signal type 4–20 mA HART analog output
Fuse rating 2.0 A
I/O card keying A4
Carrier compatibility DeltaV I/O interface carrier
Categories: , , , , SKU: VE4035S2B1 Brand:

Description

Core Product Summary

The Emerson VE4035S2B1 is a fused I/O termination block for the Emerson DeltaV M-series traditional I/O subsystem. It provides the field-wiring termination interface for the 8-channel, 4–20 mA HART analog output card and incorporates a 2.0 A fuse in the field circuit.

This terminal block is part of a keyed DeltaV I/O interface: the matching AO card plugs into the same I/O interface carrier and connects through this termination block. The VE4035S2B1 is intended for 4–20 mA HART output loops where localized field-circuit fusing is required. It mounts directly on a DeltaV I/O interface carrier and can be installed and pre-wired before the analog output card is fitted.

 

Key Technical Specifications

Parameter Specification
Manufacturer Emerson
Model / order number VE4035S2B1
Product type Fused I/O termination block
Control system family Emerson DeltaV M-series traditional I/O
Compatible I/O card 8-channel, 4–20 mA HART analog output card
Field signal type 4–20 mA HART analog output
Fuse rating 2.0 A
I/O card keying A4
Carrier compatibility DeltaV I/O interface carrier
Associated AO card channels 8
Associated AO card nominal output span 4 to 20 mA
Associated AO card full output range 1 to 23 mA
Associated AO card output compliance 20 mA at 21.6 V DC into a 700 Ω load
Associated AO card resolution 12 bits
Associated AO card accuracy 0.25% of span over temperature range
Associated AO card isolation Each channel optically isolated from the system; factory tested to 1500 V DC
Operating temperature -40 to 70°C (-40 to 158°F)
Storage temperature -40 to 85°C (-40 to 185°F)
Relative humidity 5 to 95%, non-condensing
Protection rating IP20
Conformal coating ISA-S71.04-1985 Class G3
Software support DeltaV v10.3.1 and later; for earlier DeltaV versions, request KJ3222X1-BA2

 

Detailed Product Overview

The VE4035S2B1 is the fused field-termination option for Emerson DeltaV’s 8-channel 4–20 mA HART analog output interface. It is not the analog output card itself; it is the terminal block that receives field wiring and connects it to the AO card installed in the same I/O interface.

The block includes a 2.0 A fuse for the field circuit. This provides localized overcurrent protection at the terminal-block level and is selected when the installed analog output loop requires fused field wiring rather than the standard non-fused AO termination block.

The associated AO card converts controller output commands into 4–20 mA signals for devices such as control-valve positioners, current-to-pressure transducers, and other current-operated field equipment. The card provides a nominal 4–20 mA span, a 1–23 mA full output range, 12-bit resolution, and an accuracy of 0.25% of span across its temperature range. Each output channel is optically isolated from the DeltaV system and is factory tested at 1500 V DC.

DeltaV traditional I/O uses a keyed mechanical interface between the card and terminal block. The VE4035S2B1 uses the A4 key position assigned to the 8-channel 4–20 mA HART AO card. This keying prevents an incompatible I/O card from being inserted into the block during initial installation or later maintenance.

The terminal block mounts directly on a DeltaV I/O interface carrier and can be pre-wired before the AO card is installed. The AO card supports simplex or redundant installation; for a redundant AO application, the corresponding redundant AO terminal block is the appropriate interface.

The VE4035S2B1 is supported on DeltaV v10.3.1 and later. For use with earlier DeltaV versions, Emerson identifies KJ3222X1-BA2 as the corresponding order reference.

VE4035S2B1

VE4035S2B1

VE4035S2B1

VE4035S2B1

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control system Emerson DeltaV distributed control system Part of the DeltaV M-series traditional I/O subsystem.
I/O interface 8-channel, 4–20 mA HART analog output card The terminal block and AO card form one keyed I/O interface.
I/O card keying A4 Only a card with the matching A4 key can be installed in this block.
Carrier DeltaV I/O interface carrier The terminal block plugs directly onto the carrier.
Field signal 4–20 mA HART analog output circuits The associated AO card provides a 4–20 mA nominal output span.
Fuse 2.0 A field-circuit fuse Select this block when fused field wiring is required.
Redundancy Not the redundant AO terminal block For redundant AO card installation, use the redundant AO 8-channel terminal block.
Field power 300 mA maximum per AO card at 24 V DC ±10% Applies to the associated 8-channel AO card.
Software DeltaV v10.3.1 or later For earlier versions, request KJ3222X1-BA2.
Controllers MQ, MX, or PK controllers for M-series traditional I/O M-series I/O interfaces require M-series horizontal or VerticalPlus carriers.

 

Dimensions, Mounting & Connection Notes

  • Mounting method: Plugs directly onto a DeltaV M-series I/O interface carrier.
  • Installation sequence: The terminal block can be mounted and field-wired before the compatible AO card is installed.
  • Field connection: Provides termination for an 8-channel, 4–20 mA HART analog output circuit.
  • Protection: Incorporates a 2.0 A fuse in the field circuit.
  • Keying: Uses the A4 function-key position to match the 8-channel 4–20 mA HART AO card.
  • Environmental installation limits: -40 to 70°C operating temperature, 5 to 95% non-condensing relative humidity, and IP20 protection.
  • Environmental protection: Conformal coating meeting ISA-S71.04-1985 Class G3 airborne-contaminant requirements.
  • Mechanical environment: 10 g half-sine shock for 11 ms; 1 mm peak-to-peak vibration from 5 to 16 Hz and 0.5 g from 16 to 150 Hz.

 

FAQ

What is the Emerson VE4035S2B1?
It is an Emerson DeltaV fused I/O termination block for an 8-channel, 4–20 mA HART analog output card.

Is the VE4035S2B1 an analog output card?
No. It is the fused terminal block that terminates field wiring and connects to the compatible 8-channel 4–20 mA HART AO card.

What signal type does it support?
It supports 4–20 mA HART analog output field circuits through the matching DeltaV AO card.

What fuse is installed in the VE4035S2B1?
The terminal block uses a 2.0 A fuse for the field circuit.

Which DeltaV AO card does it accept?
It accepts the 8-channel, 4–20 mA HART analog output card with A4 keying.

Can it be used for a redundant AO installation?
No. For a redundant pair of AO cards, use the redundant AO 8-channel terminal block rather than this simplex fused terminal block.

Which DeltaV software version supports it?
It is supported on DeltaV v10.3.1 and later; for earlier DeltaV versions, request KJ3222X1-BA2.

 

Documented Performance Data

Metric Value / Range Operating condition
Associated AO card channels 8 4–20 mA HART analog output interface
Nominal output span 4 to 20 mA Associated 8-channel AO card
Full output range 1 to 23 mA Associated 8-channel AO card
Output compliance 20 mA at 21.6 V DC into 700 Ω Associated 8-channel AO card
Output accuracy 0.25% of span Associated 8-channel AO card over its temperature range
Resolution 12-bit Associated 8-channel AO card
Field circuit power 300 mA maximum per card 24 V DC ±10% supply
Fuse rating 2.0 A VE4035S2B1 field circuit