Description
Core Product Summary
The EPRO UES815S-24A is a plug-in power supply module from EPRO, the German machinery protection specialist now operating under Emerson. It belongs to the EPRO MMS6000 system environment — a modular, rack-based machinery monitoring platform used for turbomachinery supervisory instrumentation (TSI) and condition monitoring on rotating equipment.
The module’s job is to supply regulated 24 VDC power inside the monitoring rack, feeding the MMS6000 series monitoring modules, the sensor circuits for EPRO eddy-current measuring chains, and the rack backplane distribution. The -24 suffix identifies the 24 VDC output version of the UES815S power supply family. As a dedicated rack plug-in unit, it is not a general-purpose DIN-rail supply: selection centers on matching the rack system and variant designation exactly, since the power module keeps an entire protection rack — and the machine it protects — running.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Plug-in regulated power supply module |
| Manufacturer | EPRO (Emerson), Germany |
| Order code | UES815S-24A |
| Series | UES815S rack power supply family |
| Output | 24 VDC |
| Mounting | Plug-in module for the MMS6000 monitoring rack backplane |
| Host system | EPRO MMS6000 series machinery monitoring racks (TSI / condition monitoring) |
| Load served | MMS6000 monitoring modules, sensor measuring circuits, rack power distribution |
Engineering Selection Highlights
- System-dedicated design — the UES815S is built as an internal power supply for EPRO MMS6000 series monitoring racks, not as a standalone industrial supply; it plugs into the rack’s dedicated power position rather than a DIN rail.
- 24 VDC output version — the -24A designation identifies the 24 VDC variant; rack documentation and module power requirements should be matched to this output level.
- Feeds the protection chain — the module powers the monitoring cards that measure shaft vibration, axial displacement, and speed on rotating equipment, so its health is directly tied to the availability of machinery protection.
- Variant designation matters — alongside the -24A, related UES815S variant designations (such as -24AR) circulate in the spare-parts market; when replacing a unit, the complete designation on the rack’s installed power module should be matched and the specific variant relationship confirmed for the rack in question.
- Rack ecosystem dependency — the power module works within the EPRO rack environment, which includes 19-inch frame hardware and monitoring modules such as the shaft vibration monitor MMS6110, configured through the MMS6910W configuration software.

UES815S-24A

UES815S-24A
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Host system | EPRO MMS6000 series machinery monitoring rack | Serves as the rack’s internal power supply |
| Modules powered | MMS6000 series monitoring modules (e.g., shaft vibration monitor MMS6110) | Monitoring functions depend on this supply |
| Sensor circuits | EPRO eddy-current measuring chains (probe, extension cable, converter) | Sensor excitation is supplied through the rack |
| Output voltage | 24 VDC (-24 version code) | Match to rack module requirements |
| Installation form | Plug-in connection to the rack backplane | Not suitable for standalone DIN-rail mounting |
| Configuration environment | MMS6000 modules configured with the MMS6910W configuration software | Software belongs to the rack system, not the power module |
Detailed Product Overview
The UES815S-24A comes from EPRO, the German supplier of machinery protection and condition monitoring systems that now operates within Emerson’s machinery health portfolio. Within EPRO’s product environment, the UES815 designation is the power supply used with the company’s 19-inch rack systems, alongside the rack frames and the MMS6000 series monitoring modules that occupy the rack slots.
The functional concept is straightforward but safety-relevant. An MMS6000 rack is a modular monitoring system: individual monitor modules — such as the MMS6110 shaft vibration monitor documented in EPRO’s system manuals — are configured through the MMS6910W configuration software and then operate continuously, measuring machinery variables through connected sensor systems. All of these modules draw their operating power from the rack, and the UES815S power supply is the unit that generates and regulates that power at 24 VDC. The “-24A” code identifies the specific 24-volt version within the UES815S family.
What this means for selection is that the power module cannot be treated as an interchangeable commodity part. Its connector form, output level, and variant designation are tied to the rack system it serves, and the spare-parts market carries closely related designations whose exact interchangeability must be confirmed for the specific rack. The practical verification points are the full part designation printed on the installed module, the rack’s system documentation, and — after installation — a power-up check confirming that the rack’s modules report no power faults and that measurement signals remain stable.
Operationally, the module deserves the same care as the measurement chain it feeds. Eddy-current measuring circuits are sensitive to supply quality and earthing arrangements; a marginal or unstable power module can show up as noise or instability in vibration and displacement readings, not just as a hard power failure. For that reason, replacement units should be functionally verified before being relied on as protection-relevant spares, and the machine’s alarm and trip arrangements should be considered whenever the rack must be powered down for an exchange.
In procurement terms, the UES815S-24A is a rack-system spare rather than a catalog commodity: it is bought by maintainers of EPRO/Emerson MMS6000 installations, and the buyer’s main verification task is confirming that the unit matches the rack’s power position and the designation of the module being replaced.
Applications & System Role
Inside a machinery protection cabinet, the UES815S-24A is the power backbone of the EPRO MMS6000 rack. The MMS6000 platform hosts monitoring modules that continuously measure shaft vibration, axial (thrust) displacement, and rotational speed on large rotating machines — turbines, compressors, and similar turbomachinery — using EPRO eddy-current sensor systems on the machine side. Those measurements feed alarm and trip logic that protects the machine.
The power supply module sits upstream of all of it: monitoring cards, sensor measuring circuits, and the rack’s internal power distribution all depend on its regulated 24 VDC output. This is why the part is a common spare in TSI cabinets — it is a single module whose failure can take an entire protection rack out of measurement. For maintenance teams, replacing a power module in a live protection system is a planned intervention: monitoring coverage is affected while the unit is exchanged, so work is typically coordinated with operation and alarm-handling procedures for the machine being monitored.
FAQ
What is the EPRO -24A?
It is a plug-in regulated power supply module from EPRO (Emerson) that provides 24 VDC power inside EPRO MMS6000 series machinery monitoring racks.
Whathe power?
It feeds the rack’s monitoring modules, the EPRO eddy-current sensor measuring circuits, and the rack’s internal power distribution — the complete measurement chain of the monitoring system.
What does the -24A designation mean?
The -24 identifies the 24 VDC output version of the UES815S power supply family; the complete designation should be matched against the installed module when ordering a replacement.
Which system does it belong to?
The EPRO MMS6000 series — a rack-based machinery monitoring platform hosting modules such as the MMS6110 shaft vibration monitor, configured with the MMS6910W configuration software.
Can it be used as a normal DIN-rail power supply?
No — it is a dedicated rack plug-in module designed for the MMS6000 rack environment, not a standalone industrial power supply.
Where is the MMS6000 system used?
In machinery protection and condition monitoring cabinets for rotating equipment such as turbines and compressors, where shaft vibration, axial displacement, and speed are continuously monitored for alarm and trip protection.
What should be considered when replacing one?
The replacement is a planned intervention: while the power module is exchanged, the rack’s monitoring coverage is affected, so the work should be coordinated with the machine’s operation and alarm-handling procedures, and the new unit should be power-up verified against module power-fault indications.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626