Sale!

Foxboro FBM1/43 P0400HH Termination Cable Assembly

  • Model: P0400HH (FBM1/43)
  • Brand: Foxboro (Schneider Electric / Invensys)
  • Series: I/A Series FBM Subsystem
  • Core Function: Signal and power interconnection between field instruments and FBM modules
  • Product Type: Field Termination Cable Assembly
  • Key Specs: Multi-core shielded wiring | FBM1/37/43 Compatible | Industrial PUR Jacket
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Critical legacy DCS cabling asset requiring strategic surplus stocking to prevent signal dropouts.
Categories: , , , , SKU: P0400HH Brand:

Description

Key Technical Specifications

Parameter Value
System Compatibility Foxboro I/A Series FBM1, FBM37, FBM43
Conductor Material Tinned copper
Rated Voltage Up to 600 V
Outer Jacket Material Polyurethane (PUR)
Operating Temperature -40 to +80 °C
Connector Configuration Dual-ended pluggable industrial pin connectors
Shielding Braided copper shield for noise suppression
Cable Length Standard industrial layout lengths
Enclosure Integration Designed for cabinet and modular baseplate setups
Weight ~0.34 kg

 

Product Introduction & Supply Chain Strategy

The Foxboro FBM1/43 P0400HH is a specialized field termination cable assembly engineered to interface field instruments with Foxboro I/A Series Distributed Control System (DCS) input/output modules. It maintains continuous analog and discrete signal transmission integrity across complex chemical, oil, and power generation control panels.

Securing this cable assembly as a certified New Surplus asset prevents unexpected loop failures caused by degraded insulation or brittle old wiring harnesses. Hoarding factory-fresh surplus components eliminates the hidden risks of second-hand or repaired cabling, protecting Total Cost of Ownership (TCO) and ensuring long-term plant reliability.

 

Installation & Configuration Guide

1.Pre-Installation (Prep & Safety):Prerequisite.

Isolate power to the target FBM baseplate and execute lock-out/tag-out (LOTO) protocols. Ground yourself using an ESD wrist strap. Document existing pinout maps and routing paths before disconnecting any legacy wiring.

Verification: Confirm zero voltage across baseplate terminals with a digital multimeter before unseating cables.

2.Removal:Mechanical Extraction.

Release the locking latches on both ends of the legacy termination cable assembly. Gently pull the connectors straight out from the module headers and baseplate ports to avoid bending pins.

Verification: Inspect mating connector pins on the baseplate and FBM module to verify complete absence of bent pins, corrosion, or trapped debris.

3.Installation (Clone & Seat):Hardware Setup.

Align the Foxboro P0400HH cable connectors with the designated FBM1/43 ports. Push firmly until the mechanical locking latches engage securely into place, ensuring proper strain relief routing inside the cabinet.

Verification: Visually check that both connector hoods are fully seated and that the cable shield drain wire is properly secured to the cabinet ground bar.

4.Power-On & Testing:Commissioning.

Restore power to the control rack and check system diagnostic registers. Verify that all connected field loops report stable process values without intermittent signal noise or open-circuit faults.

Verification: Confirm that the DCS engineering workstation displays normal operating status indicators for the corresponding I/O channels.

P0400HH

P0400HH

P0400HH

P0400HH

Firmware/Software Versions & Upgrade Notes

  • Hardware Revision Baseline: Ensure the physical pinout configuration and connector gender match your specific FBM baseplate revision.
  • Compatibility Warnings: Do not force mismatched connector keys into legacy ports, as incorrect cable variants can bridge incorrect power and signal rails across the baseplate.
  • Maintenance Best Practice: Keep cable bend radii well above manufacturer thresholds inside control cabinets to prevent internal conductor fatigue over extended operational lifecycles.

 

Frequently Asked Questions (FAQ)

  • Why is this cable assembly classified as New Surplus rather than standard factory direct?

    This unit is an authentic, original OEM-manufactured product procured from verified surplus channels after plant inventory rationalization. It has never been installed, wired into an active loop, or subjected to industrial environmental wear.

  • How can I be certain this cable is not second-hand or repaired?

    We enforce a strict zero-tolerance policy against used, repaired, or spliced cables. Each unit arrives in original factory packaging with unblemished connector pins, flexible PUR jackets, and intact factory shielding.

  • What are the hidden dangers of installing degraded or used control cabling?

    Aged or second-hand cables frequently suffer from microscopic insulation cracks, oxidized conductors, and degraded shielding. These flaws introduce erratic signal noise into DCS loops, causing false alarms and unexpected process trips.

  • Is the P0400HH compatible with standard Foxboro baseplate enclosures?

    Yes, it is specifically engineered for direct physical integration with Foxboro I/A Series FBM1, FBM37, and FBM43 modular baseplate architectures.

  • What warranty terms apply to this New Surplus cable assembly?

    This product includes a comprehensive 1-year replacement warranty, matching standard OEM reliability terms and protecting your facility’s operational investment.