Description
Core Product Summary
The GE 8521-LC-MT is a PAC8000 Logic Controller designed for industrial automation applications requiring programmable logic control. It supports IEC 61131-style PLC programming and provides the processing and communication functions needed to execute control strategies and exchange data with connected I/O modules and supervisory systems.
The controller includes two RJ45 Ethernet connections and an RS-485 half-duplex serial interface. Its Ethernet ports support 10/100 Mbps communication, while the serial interface operates at transmission rates from 1.2 to 115.2 kbps. The module receives its operating power through the PAC8000 carrier, with a nominal 12 VDC supply requirement.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Intelligent Platforms |
| Model | 8521-LC-MT |
| Product Type | Logic Controller |
| Product Family | PAC8000 |
| Control Function | IEC 61131-style PLC programming |
| Ethernet Connections | 2 × RJ45 |
| Ethernet Standard | 100BASE-TX / 10BASE-T |
| Ethernet Speed | 10–100 Mbps |
| Ethernet Isolation | 1500 V dielectric withstand |
| Serial Interface | RS-485 half-duplex |
| Serial Transmission Rate | 1.2–115.2 kbps |
| Serial Connectors | 9-pin D-type interfaces |
| Controller Supply Voltage | 10.9–12.6 VDC |
| Typical Controller Current | 0.4 A |
| Maximum Controller Current | 0.5 A |
| Railbus Current | 15 mA maximum |
| Dimensions (W × D × H) | 69 × 232 × 138 mm |
| Approximate Weight | 1.35 kg |
Product Overview
The 8521-LC-MT is the logic-oriented controller option within the GE PAC8000 controller family. It is intended for applications where control strategies are developed using IEC 61131-style PLC programming rather than the DCS-style function block approach associated with the PAC8000 Process Controller.
Within a PAC8000 system, the controller executes the configured logic application and communicates with the associated I/O infrastructure. Its Ethernet interfaces provide connections to industrial networks and supervisory equipment, while the RS-485 interface supports serial communication with compatible devices.
The two Ethernet connections use RJ45 connectors and support 10BASE-T and 100BASE-TX transmission. Ethernet isolation is specified at 1500 V dielectric withstand. The serial interface uses RS-485 half-duplex communication, with supported transmission rates ranging from 1.2 to 115.2 kbps.
The controller is supplied through its PAC8000 carrier. Correct carrier selection, power availability, network configuration, and software compatibility are therefore important considerations when planning a replacement or system installation.

8521-LC-MT
PAC8000 Controller Family and System Integration
The 8521-LC-MT belongs to a family of PAC8000 controllers that provide different control-programming capabilities.
| Model | Product Description | Primary Function |
|---|---|---|
| 8521-LC-MT | Logic Controller | IEC 61131-style PLC programming |
| 8521-PC-MT | Process Controller | DCS-style function block programming |
| 8521-HC-MT | Hybrid Controller | Logic and process control programming |
| 8521-RT-DE | RTU Controller | Remote terminal unit applications |
| 8521-EB-MT | Ethernet Bus Interface Module | Remote I/O bus interface |
The PAC8000 platform supports up to 64 modules per controller according to the controller datasheet. The 8521-LC-MT is configured using the PAC8000 Logic Workbench.
Integration considerations:
- Select the Logic Controller type when configuring the controller in the PAC8000 Workbench.
- Use the Logic IEC 61131-3 control package for the logic application.
- Confirm the carrier and I/O module configuration before commissioning.
- Verify Ethernet addressing and serial communication parameters.
- Check that the installed application and configuration correspond to the replacement controller.
Installation and Configuration Considerations
Before replacing or commissioning a GE 8521-LC-MT, review these points:
- Carrier compatibility: Confirm that the installed PAC8000 carrier supports the controller and required system configuration.
- Power requirements: Verify the carrier’s 12 VDC supply is within the specified 10.9–12.6 VDC range.
- Ethernet connections: Record the existing network assignments and verify the correct Ethernet configuration.
- Serial communication: Check RS-485 wiring, communication speed, and connected-device settings.
- Programming software: Confirm compatibility with the PAC8000 Logic Workbench and the existing project.
- Application backup: Back up the control program and hardware configuration before replacement.
- Commissioning: Verify controller status, I/O communication, and control logic execution before returning the system to service.
Frequently Asked Questions
What is the GE 8521-LC-MT used for?
It is a PAC8000 Logic Controller used to execute IEC 61131-style programmable logic control applications in industrial automation systems.
Which programming environment is used with the 8521-LC-MT?
The controller is configured using the PAC8000 Logic Workbench.
Does the 8521-LC-MT have Ethernet ports?
Yes. It has two RJ45 Ethernet connections supporting 10BASE-T and 100BASE-TX communication.
What serial communication interface does it support?
It supports RS-485 half-duplex communication at transmission rates from 1.2 to 115.2 kbps.
What is the operating voltage of the controller?
The specified controller supply range is 10.9–12.6 VDC, with a typical current of 0.4 A and a maximum of 0.5 A.
What is the difference between 8521-LC-MT and 8521-PC-MT?
The 8521-LC-MT is the PAC8000 Logic Controller for IEC 61131-style PLC programming. The 8521-PC-MT is the Process Controller, designed for DCS-style function block programming.
Can the 8521-LC-MT be replaced directly with an 8521-HC-MT?
They belong to the same PAC8000 controller family but provide different control capabilities. Replacement requires checking the control software, application configuration, and system engineering requirements rather than assuming direct interchangeability.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626