Sale!

GE Fanuc 8851-LC-MT PAC8000 SafetyNet SIL 2 Controller

Specification Verified Parameter
Manufacturer / Brand GE Fanuc / MTL (Emerson)
Product Family PAC8000 SafetyNet Series
Model Number 8851-LC-MT
Product Type Programmable Safety Logic Controller
Safety Certification SIL 2 certified according to IEC 61508
Safety Architecture 1oo1D (1-out-of-1 with Internal Diagnostics)
System I/O Capacity Communicates with up to 64 PAC8000 I/O modules
Categories: , , , , Brand:

Description

Core Product Summary (Brand / Model / Key Attributes)

The GE Fanuc / MTL 8851-LC-MT is a programmable safety logic controller designed for the PAC8000 SafetyNet platform. Engineed for safety-critical industrial process control, the module is certified to IEC 61508 for use in SIL 2 applications using a 1oo1D (1-out-of-1 with Diagnostics) fault-tolerant architecture.

The controller manages safety loops across process installations by communicating with up to 64 PAC8000 I/O modules and exchanging peer-to-peer data with other SafetyNet or standard controllers. It features dual redundant 10/100 Mbps Ethernet ports and two RS-485 serial interfaces for network and device integration. Built for high availability, the 8851-LC-MT supports online configuration changes, event logging for up to 8,000 events, HART pass-through data transmission, and hot-swappable installation on compatible controller carriers within Class I, Division 2 / Zone 2 hazardous areas.

 

Key Technical Specifications

Specification Verified Parameter
Manufacturer / Brand GE Fanuc / MTL (Emerson)
Product Family PAC8000 SafetyNet Series
Model Number 8851-LC-MT
Product Type Programmable Safety Logic Controller
Safety Certification SIL 2 certified according to IEC 61508
Safety Architecture 1oo1D (1-out-of-1 with Internal Diagnostics)
System I/O Capacity Communicates with up to 64 PAC8000 I/O modules
Ethernet Interface 2 × 10/100 Mbps high-speed fault-tolerant Ethernet ports
Serial Interface 2 × RS-485 half-duplex serial ports
Nominal Supply Voltage 12 VDC (supplied via controller carrier)
Current Consumption 0.4 A typical (0.5 A maximum)
Storage Capacity Up to 8,000 recorded diagnostic/fault events
Hazardous Area Rating Class I, Div 2 / Zone 2 (EEx nL IIC T4 compliant)
Compatible Carriers 8750-CA-NS Standard Carrier / 8751-CA-NS ELFD Carrier

 

Detailed Product Overview

The GE Fanuc 8851-LC-MT acts as the safety processing core for the PAC8000 SafetyNet architecture, executing dedicated functional safety routines independently of standard process automation controllers. Its primary role is to monitor critical process variables, execute safety instrumented functions (SIF), and initiate trip or shutdown actions when operating thresholds are exceeded.

By implementing a 1oo1D internal diagnostic structure, the controller continuously evaluates hardware health, memory integrity, and program execution paths without requiring complex multi-channel hardware setups for SIL 2 compliance. For high-availability applications requiring uninterrupted process uptime, dual 8851-LC-MT controllers can be installed on a redundant carrier layout to enable bumpless master-to-standby failover.

The unit supports HART pass-through capabilities, allowing maintenance systems to access smart field device diagnostics directly through the safety node. Designed for field mounting near process equipment, the module carries approvals for Class I, Division 2 and Zone 2 hazardous locations, permitting hot-swappable maintenance without interrupting local power or process operations.

8851-LC-MT

8851-LC-MT

Engineering Selection Highlights

  • SIL 2 Compliance: Certified to IEC 61508 for SIL 2 applications using an internal 1oo1D diagnostic architecture.
  • Redundant Ethernet Networking: Equipped with dual fault-tolerant 10/100 Mbps Ethernet ports for high-speed peer-to-peer and supervisory network connections.
  • Bumpless Redundancy Option: Supports dual-controller configurations with seamless master-to-standby transfer to maintain control uptime.
  • Hot-Swappable Maintenance: Allows module replacement and online reconfiguration under live power conditions in Class I, Div 2 / Zone 2 hazardous locations.
  • HART Data Integration: Supports pass-through transmission of HART process variables and diagnostic data to asset management software.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Mounting Carriers 8750-CA-NS Standard Carrier or 8751-CA-NS Earth Leakage Fault Detection (ELFD) Carrier Plugs directly onto carrier slots to interface with power and field bus lines.
Power Supply Module 8913-PS-AC or compatible 12 VDC carrier power source Provides the 12 VDC operating power required by the controller logic.
Network Protocols SafetyNet peer-to-peer, Modbus RTU / TCP communication Interfacing with third-party PLCs/DCS networks requires parameter alignment.
Configuration Software PAC8000 SafetyNet Workbench / Engineering Software Used for downloading safety logic, configuring network nodes, and setting I/O parameters.

 

Dimensions, Mounting & Connection Notes

  • Dimensions & Weight: Approximately 69 mm (W) × 232 mm (D) × 138 mm (H); weighs roughly 1.35 kg.
  • Mounting Method: Plugs directly onto a dedicated PAC8000 controller carrier (e.g., 8750-CA-NS or 8751-CA-NS) mounted on standard DIN rail or flat panel surfaces.
  • Wiring Connections: Field I/O and network power connections pass through the underlying carrier base; front-panel serial ports use standard D-type connectors.
  • Grounding Practices: Ensure the carrier M4 ground screw is connected to a clean protective earth (PE) ground to maintain EMC immunity and proper fault detection.

 

FAQ

What is the GE Fanuc 8851-LC-MT?

It is a programmable safety logic controller module for the PAC8000 SafetyNet system used in safety instrumented systems (SIS).

Is the 8851-LC-MT certified for safety applications?

Yes, it is certified according to IEC 61508 for use in SIL 2 safety applications using a 1oo1D architecture.

Can the controller operate in a redundant configuration?

Yes, two 8851-LC-MT modules can be deployed in a master/standby configuration with bumpless transfer to ensure high system availability.

How many I/O modules can a single 8851-LC-MT controller manage?

A single controller can communicate with and manage up to 64 PAC8000 I/O modules.

Can this module be hot-swapped in hazardous areas?

Yes, the module is live-maintainable and hot-swappable in Class I, Division 2 or Zone 2 hazardous areas without shutting down system power.

 

Verification & Troubleshooting Notes

  • Master / Standby Failover Status: On redundant carriers equipped with manual “Change State” buttons, verify that pressing the button successfully transitions a healthy Master to Standby or forces an offline Standby unit to re-synchronize before executing live maintenance.
  • Ethernet Communication Faults: Check link/activity status on both front network ports; confirm IP addressing and network subnet parameters in the SafetyNet software if peer-to-peer data transfers stall.
  • Diagnostic Log Retrieval: Use the engineering software to extract the controller’s internal event log (up to 8,000 events) to analyze fault codes, power cycle events, or channel trip causes.