WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Key Technical Specifications
| Parameter | Specification |
| Manufacturer Model | FIS-13 |
| Total Card Slots | 13 dedicated module slots |
| Chassis Material | Industrial-grade cold-rolled steel |
| Mounting Standard | 19-inch rack mount or internal panel enclosure mounting |
| Backplane Interconnects | Integrated multi-slot bus distribution connectors |
| Operating Voltage (Fans/Logic) | 24 V DC / 120 V AC system input compatible |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Dimensions (H x W x D) | Standard 19″ rack height (approx. 4U to 6U) x 483 mm x 350 mm |
| System Weight | Approx. 8.5 kg (18.7 lbs) |
Product Introduction & Supply Chain Strategy
The GE FIS-13 is a heavy-duty 13-slot industrial rack chassis and interface frame built to house GE process control cards, power modules, and thermal management assemblies. Designed for high-vibration power generation and industrial environments, it secures internal card guide alignment while distributing backplane communication and cooling airflow.
This product is a Brand New Surplus unit. It is not used, not pulled from a decommissioned plant, and not refurbished. All assemblies undergo rigorous quality verification to ensure OEM-level mechanical and electrical integrity. Sourcing a New Surplus FIS-13 chassis prevents long lead times when expanding or replacing damaged cabinet housing. Using refurbished or pulled racks introduces hidden risks—such as bent backplane pins, fatigued card guide rails, and worn cooling fan connections that cause intermittent board loss and total rack shutoffs. Keeping a New Surplus FIS-13 unit in buffer stock guarantees an immediate physical drop-in replacement, ensuring full multi-slot backplane integrity and zero operational downtime.
Installation & Configuration Guide
Stage 1: Pre-Installation (Prep & Safety)
- Disconnect and lock out all cabinet power supplies feeding the rack assembly (LOTO).
- Attach a grounded ESD wrist strap to the main cabinet grounding stud before handling backplane interface connections.
- Verify panel mounting clearances and confirm 19-inch rack mounting hole alignments match cabinet rail specifications.
- Inspect card guide channels and rear connector sockets for dust or mechanical obstruction prior to installation.
Stage 2: Removal
- Unplug all front-facing I/O cables, field wiring connectors, and power supply harnesses attached to housed cards.
- Carefully extract all control cards from the 13 slots and place them in static-shielding bags.
- Unbolt the chassis mounting screws securing the old FIS-13 frame to the 19-inch cabinet rack or backplate.
- Slide the chassis straight out of the enclosure frame.
Stage 3: Installation (Clone & Seat)
- Mount the new FIS-13 rack frame securely into the cabinet using M6 rack screws and cage nuts.
- Fasten the main protective earth (PE) grounding strap directly to the frame’s dedicated grounding stud.
- Reinsert all 13 control and interface modules into their designated slot positions, sliding them smoothly along the guide rails until fully seated into the rear backplane.
- Tighten card faceplate retaining screws to lock all modules firmly in place.
Stage 4: Power-On & Testing
- Check that line supply voltages match cabinet system requirements before applying power.
- Energize the rack power supply and verify integrated cooling fans (if equipped) rotate freely without mechanical noise.
- Inspect backplane status LEDs across all installed modules to confirm solid power and communication handshakes.
- FIS-13
Firmware/Software Versions & Upgrade Notes
- System Integration: Compatible with standard GE control system module layouts utilizing 13-slot backplane routing.
- Slot Mapping: Ensure module slot positioning matches the original system topology database exactly. Slot mapping errors can cause communication mismatch faults in main controller software.
- Hardware Swap Protection: Replacing a structural frame and backplane assembly requires no software flashing. Always ensure all field power supplies are completely de-energized before inserting modules to avoid arcing backplane connector pins.
Frequently Asked Questions (FAQ)
Is this GE FIS-13 chassis brand new or refurbished?
This product is a Brand New Surplus unit. It is not used, not pulled from a decommissioned plant, and not refurbished. Every chassis undergoes physical frame inspection, rail alignment verification, and backplane pin checks before dispatch.
Why is New Surplus preferred over a refurbished or pulled rack assembly?
Refurbished or pulled rack frames frequently suffer from physical deformation, worn card guide tracks, and oxidized backplane pins due to years of thermal cycling. A minor pin contact fault on a backplane slot can cause intermittent card resets that take days to troubleshoot. New Surplus provides pristine structural integrity and original pin connectivity.
Does the FIS-13 come with pre-installed control cards?
No. The FIS-13 is the physical 13-slot chassis frame and backplane interface assembly. Control cards, power supplies, and I/O modules are installed separately based on your specific control system architecture.
What mounting format does the FIS-13 use?
The FIS-13 is designed for installation in standard 19-inch industrial enclosure racks or direct backplate panel mounting inside control cabinets.
How does the chassis support thermal management?
The FIS-13 framework incorporates airflow channels designed to guide forced air from fan trays evenly across all 13 slots, preventing localized heat build-up on high-density processor cards.
What warranty covers this chassis assembly?
All New Surplus GE FIS-13 chassis assemblies ship in protective packaging with individual serial tag verification and a comprehensive 1-year operational replacement warranty.
