WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Product Core Brief
- Model: IC752WBB202D
- Brand: GE Fanuc
- Series: Display Station 2000 / QuickPanel
- Core Function: Operator interface terminal
- Product Type: Industrial HMI touchscreen
- Key Specs: 12.4 in color TFT LCD, 800×600 VGA
- Condition: New Surplus
Key Technical Specifications
- Display: 12.4 inch color TFT LCD, 800 x 600 resolution
- Touchscreen: Analog resistive, 4096×4096 resolution
- Serial ports: 2 RS-232C, 1 RS-485 (isolated)
- Ethernet: 10/100Base-T optional via PCMCIA
- Power input: 24 VDC, 1.5 A max consumption
- Memory: 4 MB application flash, 512 KB SRAM
- Operating temperature: 0°C to 55°C
- Dimensions: 15.75 x 11.42 x 3.54 in (400 x 290 x 90 mm)
- Weight: 10.6 kg (23.4 lbs)
- Humidity: 10% to 90% non-condensing [web://73]
Product Introduction
GE IC752WBB202D is a Display Station 2000 operator interface terminal with 12.4-inch color touchscreen for HMI applications in GE Fanuc PLC systems. Connects via serial to Series 90-30/70 or VersaMax controllers for runtime screens and control.
Provides VGA graphics with 65K colors, supports CIMPLICITY Quick Designer builds. Field panels run 24/7 in washdown areas—IP65 front rated. Needs 24 VDC external supply; verify serial baud matches PLC (9600 default).
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| No power LED, screen dark | 24 VDC dropout or fuse blown | ✅ High | Measure 22-26 VDC at barrel jack with Fluke 115 | Check polarity + inside; replace 3 A fast-blow fuse |
| Touch unresponsive, draws OK | Calibration lost or resistive damage | ✅ High | Touch corners register? Quick Designer diag mode | Recalibrate via touchscreen menu; clean with IPA only |
| Serial comms fail to PLC | Baud/parity mismatch or bad cable | ✅ Medium | HyperTerminal loopback pin 2-3; 9600 8N1 std | Null modem DB9; match PLC port settings exactly |
| Screen flickers under vibration | Loose internal ribbon or shock mount fail | ✅ High | Rock unit—stops? Check mounting torque 10 in-lbs | Add isolation pads; reseat display connector inside |
| Download hangs at 50% | Flash full or bad PCMCIA card | ❌ Low | % full in controller; 4 MB limit | Archive project first; format Type II card FAT16 |
Snap front panel photo with error codes. HMIs die from power spikes 75%—add TVS diodes. Send serial logs to support.
- IC752WBB202D
Frequently Asked Questions (FAQ)
Serial protocol—works with Modbus?
Yes, native GE SNP plus Modbus RTU master/slave. Config in Quick Designer; 32 devices max per port.
Panel cutout dimensions?
14.17 x 9.76 in (360 x 248 mm). IP65 NEMA4X front gasket included. Mount horizontal only.
Memory upgrade possible?
No—fixed 4 MB flash/512 KB SRAM. Split projects or use Ethernet HMI for bigger screens.
D suffix firmware level?
Latest runtime for Windows CE core. Reads Series 90-30 v10+ logic. Check sticker vs Proficy.
❗ Common swap error?
❗ Wrong power polarity fries barrel jack instantly. Red +, black -. Seen three smoke on first power-up. Use bench supply first.
Condition and test details?
New Surplus: OEM stock, full screen test with 100 touch points + serial SNP loop. No dead pixels; brightness verified. Reports ready.
Warranty, lead time?
1-year DOA. In stock, ships after 24-hour screen burn-in. Same day dispatch.
