Sale!

GE PWB68A993125 SCR Gate and Filter Printed Circuit Board

Attribute Verified information
Manufacturer General Electric (GE)
Model / order number PWB68A993125
Product type SCR gate and filter printed circuit board
Associated control platform GE Speedtronic Mark II
Primary function SCR gate and filter circuitry
Connection style Screw terminals
Categories: , , , , SKU: PWB68A993125 Brand:

Description

Core Product Summary

The GE PWB68A993125 is a General Electric SCR gate and filter printed circuit board associated with the Speedtronic Mark II gas-turbine control system. Its function is to provide the gate-and-filter circuitry associated with SCR-based power-control circuitry in that control platform.

The board is identified in supplier and technical references as an SCR Gate & Filter Card and is described as using screw terminals for field or internal wiring connections. Because it belongs to the Speedtronic Mark II environment, correct identification of the installed system, board revision, and wiring arrangement is important before substitution or repair planning.

 

Key Technical Specifications

Attribute Verified information
Manufacturer General Electric (GE)
Model / order number PWB68A993125
Product type SCR gate and filter printed circuit board
Associated control platform GE Speedtronic Mark II
Primary function SCR gate and filter circuitry
Connection style Screw terminals

 

Engineering Selection Highlights

  • The exact order number PWB68A993125 identifies an SCR gate and filter card, so it should be matched against the board designation marked on the installed assembly rather than selected by physical appearance alone.
  • Its association with GE Speedtronic Mark II means system-level fit should be confirmed against the turbine-control cabinet documentation and the installed board location.
  • The documented screw-terminal connection style affects inspection, removal, and rewiring practice; terminal identification and wire routing should be recorded before disconnection.
  • As an SCR gate and filter board, it is part of the power-electronics interface rather than a general-purpose logic or I/O module.
  • Verification of the complete board marking, revision, and any associated GE reference number is prudent when sourcing a replacement or arranging repair.
PWB68A993125

PWB68A993125

PWB68A993125

PWB68A993125

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control platform GE Speedtronic Mark II Confirm that the installed turbine-control system is a Mark II configuration before using this board designation for replacement planning.
Board function SCR gate and filter circuitry The board is intended for the SCR gate/filter portion of the associated control architecture, not as a substitute for unrelated control cards.
Wiring connection Screw terminals Preserve terminal assignments and wiring orientation during removal or replacement.

 

Dimensions, Mounting & Connection Notes

The board uses screw terminals for its documented connection arrangement. No exact board dimensions, weight, mounting orientation, terminal torque, wire-size range, or clearance requirement could be established from sufficiently reliable exact-model documentation, so those installation values are omitted.

 

Detailed Product Overview

The GE PWB68A993125 is an SCR gate and filter printed circuit board used in the GE Speedtronic Mark II turbine-control environment. The designation identifies both its electrical role—SCR gate and filter functions—and its place in the Mark II control architecture.

In practical terms, an SCR gate-and-filter card sits between the turbine-control logic and the SCR power-control stage. The gate function is associated with controlling SCR switching, while the filter portion is associated with the signal-conditioning and filtering circuitry required in that section of the system. The exact board should therefore be evaluated as part of the complete Speedtronic Mark II cabinet, including its wiring, associated power devices, and documented control drawings.

The board’s screw-terminal construction is a practical service consideration. Before removal, technicians should document terminal numbers, conductor routing, and any board-mounted identification or revision markings. This is particularly important for legacy turbine-control equipment, where replacement decisions depend on the exact board designation and installed system configuration rather than a general product family description.

 

Applications & System Role

Within a GE Speedtronic Mark II turbine-control installation, the PWB68A993125 serves in the SCR gate-and-filter portion of the control architecture. Its role is tied to the control and conditioning functions surrounding SCR-based power-control circuitry.

This makes the board relevant to maintenance or parts identification for legacy Speedtronic Mark II turbine-control cabinets where SCR gate and filter circuitry is present. It should be treated as a system-specific control-board spare rather than a generic industrial PCB.

 

FAQ

What is GE PWB68A993125?
GE PWB68A993125 is a General Electric SCR gate and filter printed circuit board associated with the Speedtronic Mark II turbine-control system.

Which system is it associated with?
It is associated with GE Speedtronic Mark II gas-turbine control equipment.

What does the board do?
It provides SCR gate and filter circuitry within the associated Speedtronic Mark II control architecture.

What type of connections does it use?
The board is documented as using screw terminals.

Is it a general-purpose PLC I/O board?
No. It is identified specifically as an SCR gate and filter card, not as a general-purpose PLC input/output module.

What should be checked before ordering or installing a replacement?
Confirm the exact board marking PWB68A993125, the installed Speedtronic Mark II system configuration, board revision or related reference markings, and the original screw-terminal wiring arrangement.