Sale!

GUTOR 0400184 PCA ISO-Driver Printed Circuit Board

Specification Category Technical Detail
Manufacturer / Brand GUTOR (Gutor Electronics)
Model / Order Number 0400184
Associated Board Reference SILCON 21107-2
Functional Designation PCA ISO-Driver
Product Type Isolated Driver Printed Circuit Board Assembly (PCBA)
Primary Application GUTOR SILCON Three-Phase UPS Systems (including SSQ 3PH configurations)
Approximate Weight 0.25 kg (250 g)
Mounting Format Internal Enclosure / Chassis Subassembly Integration
Categories: , , , , SKU: 0400184 Brand:

Description

Core Product Summary (Brand / Model / Key Attributes)

The GUTOR 0400184 (also identified as SILCON 21107-2 and marked as PCA ISO-Driver) is an industrial printed circuit board assembly engineered for GUTOR SILCON three-phase uninterruptible power supply (UPS) systems. Functioning as an isolated driver subassembly, this board provides electrical isolation while transferring switching control signals between low-voltage control logic and high-power semiconductor conversion stages.

Designed for continuous-duty industrial power protection infrastructure, the assembly integrates on-board signal isolation components, capacitive decoupling, inductive elements, and multi-pin board headers configured for installation inside designated GUTOR UPS enclosures. Proper replacement requires confirming exact part-number and board-designation alignment with the host equipment’s service documentation, following electrostatic discharge (ESD) precautions, and completely isolating all AC, DC, and battery power sources before service.

 

Key Technical Specifications

Specification Category Technical Detail
Manufacturer / Brand GUTOR (Gutor Electronics)
Model / Order Number 0400184
Associated Board Reference SILCON 21107-2
Functional Designation PCA ISO-Driver
Product Type Isolated Driver Printed Circuit Board Assembly (PCBA)
Primary Application GUTOR SILCON Three-Phase UPS Systems (including SSQ 3PH configurations)
Approximate Weight 0.25 kg (250 g)
Mounting Format Internal Enclosure / Chassis Subassembly Integration

 

Detailed Product Overview

The GUTOR 0400184 serves as an isolated driver circuit board within GUTOR SILCON three-phase uninterruptible power supply (UPS) architectures. In three-phase industrial UPS equipment, isolated driver subassemblies act as the electrical interface between the control electronics and the power switching stage, transmitting drive signals while maintaining galvanic isolation to protect low-voltage control circuits from high-voltage power bus potentials.

Because this board is a subsystem component rather than a standalone device, its operating voltage levels and signal characteristics depend on the specific host UPS configuration and chassis slot. Before installing a replacement unit, maintenance personnel must verify that both the 0400184 order code and the SILCON 21107-2 board designation match the installed assembly, and inspect the connector layout and hardware revision against the equipment’s original service records.

0400184

0400184

0400184

0400184

Engineering Selection Highlights

  • Exact Part Identification: Identified by order number 0400184 and silk-screened board designation SILCON 21107-2 (PCA ISO-Driver), supporting exact spare-part verification for compatible GUTOR UPS cabinets.
  • Galvanic Signal Isolation: Engineered to transfer switching control signals while isolating low-voltage control logic from high-voltage three-phase power stages.
  • Dedicated UPS Integration: Configured with board-mounted multi-pin connectors and discrete isolation components for direct mounting within compatible SILCON three-phase UPS chassis.
  • Maintenance and Spare-Parts Support: Supports corrective maintenance and scheduled spare-parts provisioning for established industrial UPS installations without altering existing wiring architectures.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
System Family GUTOR SILCON Three-Phase UPS Systems (including SSQ 3PH variants) Confirm exact UPS model, cabinet serial number, and board position in the OEM parts list prior to installation.
Board Designation Match Order Code 0400184 / SILCON 21107-2 Verify that both part identifiers and the physical connector arrangement match the removed PCB.
Connection Protocol On-Board Multi-Pin Headers and Internal Wiring Harnesses Document original wire positions before removal and verify full connector seating upon installation.

 

Dimensions, Mounting & Connection Notes

  • Physical Weight: Approximately 0.25 kg (250 g) for the bare printed circuit board assembly.
  • Mounting Configuration: Installed internally within designated GUTOR UPS enclosures using factory mounting points or card guides.
  • Electrical Isolation Safety: Isolate all AC input, bypass, DC bus, and battery energy sources according to the UPS manufacturer’s lockout/tagout procedure, and verify zero residual capacitor voltage before handling the board.
  • Handling Precautions: Observe strict electrostatic discharge (ESD) protection using grounded wrist straps and anti-static work surfaces during removal, inspection, and installation.
  • Environmental Limits: Intended for operation inside clean, climate-controlled industrial UPS cabinets protected from moisture, conductive dust, and corrosive gases.

 

FAQ

What is the GUTOR 0400184?

The GUTOR 0400184 is an isolated driver printed circuit board assembly (PCA ISO-Driver) used in GUTOR SILCON three-phase uninterruptible power supply (UPS) systems.

What is the secondary part number associated with the GUTOR 0400184?

The board carries the associated reference SILCON 21107-2 alongside the 0400184 order number.

What function does the PCA ISO-Driver perform in a UPS?

It transfers switching control signals between the UPS control circuitry and the power conversion stage while providing electrical isolation between low-voltage and high-voltage sections.

What precautions must be taken before replacing the GUTOR 0400184?

Technicians must follow the host UPS emergency or maintenance shutdown procedure, isolate all AC and DC battery power sources, verify stored capacitor energy is discharged, and use ESD-protective equipment.

 

Verification & Troubleshooting Notes

  • Pre-Installation Inspection: Examine the replacement PCB for physical damage, cracked solder joints, burnt components, or bent header pins, and inspect the surrounding UPS compartment for signs of overheating.
  • Wiring and Connector Verification: Cross-check recorded harness labels against board header markings to ensure every plug is seated firmly in its designated position without pin misalignment.
  • Post-Installation Commissioning: Do not apply external test power to driver outputs outside approved manufacturer procedures; follow the host SILCON UPS return-to-service sequence and verify normal status indicators before transferring critical loads.