Description
Core Product Summary
The GUTOR 0P0282 is an A202 400 VDC power-supply PCB used in GUTOR UPS and related critical-power equipment. It converts a 400 VDC input into low-voltage auxiliary supplies of +20 VDC, +12 VDC, -12 VDC, and +5 VDC for associated control electronics.
The board is identified in GUTOR spare-parts documentation as “PSU 400VDC” and carries the product designation A202. The supplied hardware identification also includes assembly reference 21469-3 / 640-0398 and revision Rev.03. As an auxiliary power-supply component, it supports the low-voltage power requirements of the UPS control and electronic circuits rather than performing rectification, inversion, or battery-charging functions.
Key Technical Specifications
| Item | Value |
|---|---|
| Manufacturer | GUTOR |
| Part number | 0P0282 |
| Product designation | A202 |
| Product type | Power-supply PCB |
| Input voltage | 400 VDC |
| Output voltages | +20 VDC, +12 VDC, -12 VDC, +5 VDC |
| Associated assembly reference | 21469-3 / 640-0398 |
| Hardware revision | Rev.03 |
| Equipment category | GUTOR UPS / critical-power equipment |
| Functional role | Auxiliary power supply for UPS control electronics |
Engineering Selection Highlights
- The 0P0282 is a 400 VDC input power-supply PCB, so it should be selected only where the installed GUTOR system provides this DC supply level.
- Its four output rails—+20 VDC, +12 VDC, -12 VDC, and +5 VDC—must match the auxiliary-power requirements of the associated UPS control electronics.
- The A202 designation identifies the board as a GUTOR power-supply component and should be used alongside the 0P0282 part number during parts matching.
- The assembly reference 21469-3 / 640-0398 and Rev.03 identification provide additional hardware-level identification and should be checked against the installed board.
- The board is an auxiliary power-supply component, not a complete UPS, rectifier, inverter, or battery charger.
- Replacement selection should consider the complete identification combination—0P0282, 21469-3 / 640-0398, and Rev.03—rather than the commercial part number alone.

0P0282

0P0282
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Manufacturer system | GUTOR UPS and related critical-power equipment | The board is documented as a GUTOR UPS power-system component. |
| Input supply | 400 VDC | The board requires a 400 VDC input supply. |
| Output rails | +20 VDC, +12 VDC, -12 VDC, and +5 VDC | The output rails supply low-voltage auxiliary power to associated electronics. |
| Product designation | A202 | Use this designation when identifying the board in GUTOR documentation. |
| Assembly reference | 21469-3 / 640-0398 | This reference provides additional hardware-level identification. |
| Hardware revision | Rev.03 | Confirm the installed board revision when selecting a replacement. |
| System role | Auxiliary power supply | The board supports control electronics rather than main power conversion. |
Dimensions, Mounting & Connection Notes
The available product references identify the GUTOR 0P0282 as a PCB assembly but do not provide a sufficiently supported set of physical dimensions, connector pinout, mounting-hole pattern, or terminal-torque values for publication.
The board should be handled and installed according to the documentation for the specific GUTOR UPS model and cabinet configuration in which it is fitted. Because it is a power-supply PCB operating from a 400 VDC input, appropriate electrical-safety procedures and verification of the installed system configuration are required before service or replacement.
Applications & System Role
Within a GUTOR UPS system, the 0P0282 provides regulated low-voltage auxiliary power from a 400 VDC source. Its +20 VDC, ±12 VDC, and +5 VDC outputs support the control and electronic circuits that operate the UPS and its associated monitoring or control functions.
The board is listed in GUTOR spare-parts documentation as “PSU 400VDC” with the A202 designation. This places it in the power-supply category of the UPS architecture, distinct from the rectifier, inverter, static switch, and battery-charging functions.
Detailed Product Overview
The GUTOR 0P0282 is an auxiliary power-supply PCB designed for GUTOR UPS and related critical-power equipment. It is identified in GUTOR documentation as an A202 400 VDC power supply and is associated with the assembly reference 21469-3 / 640-0398, revision Rev.03.
The board takes a 400 VDC input and produces multiple low-voltage output rails: +20 VDC, +12 VDC, -12 VDC, and +5 VDC. These rails provide auxiliary operating power for the UPS control electronics. The exact distribution of each rail depends on the host UPS configuration, but the board’s function is to supply low-voltage control power rather than to perform the UPS’s main power-conversion tasks.
The 0P0282 is not a complete UPS. It is a component within the UPS power-system architecture and should be treated as an auxiliary power-supply board for maintenance, repair, or replacement purposes. Its 400 VDC input also means that service work requires appropriate electrical-safety procedures and confirmation that the input supply is isolated and de-energized before the board is accessed.
For procurement and replacement, the complete identification set should be used: GUTOR part number 0P0282, product designation A202, assembly reference 21469-3 / 640-0398, and hardware revision Rev.03. Matching all of these references reduces the risk of selecting a visually similar board that does not match the installed GUTOR system configuration.
FAQ
What is GUTOR 0P0282?
GUTOR 0P0282 is an A202 400 VDC power-supply PCB used in GUTOR UPS and related critical-power equipment.
What input voltage does the 0P0282 require?
The board requires a 400 VDC input supply.
What output voltages does the 0P0282 provide?
It provides +20 VDC, +12 VDC, -12 VDC, and +5 VDC auxiliary outputs.
What is the A202 designation?
A202 is the GUTOR product designation associated with the 0P0282 400 VDC power-supply PCB.
What is the assembly reference for this board?
The associated assembly reference is 21469-3 / 640-0398, with hardware revision Rev.03.
Is the 0P0282 a complete UPS?
No. It is an auxiliary power-supply PCB within a GUTOR UPS system, not a complete UPS unit.
What is the board’s role in the UPS architecture?
It converts a 400 VDC input into low-voltage auxiliary supplies for the UPS control and electronic circuits.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626