Sale!

HIMA X-AI3201 985210213 HIMax 32-Channel Analog Input Module

The HIMA X-AI3201 985210213 is a 32-channel analog input module for the HIMA HIMax programmable electronic system. It evaluates 0/4–20 mA current signals from transmitters and safety transmitters, with an operating range up to 22.5 mA, 12-bit digital resolution, and line monitoring.

Categories: , , , , SKU: X-AI3201 985210213 Brand:

Description

Core Product Summary

The HIMA X-AI3201 985210213 is a 32-channel analog input module for the HIMA HIMax programmable electronic system. It evaluates 0/4–20 mA current signals from transmitters and safety transmitters, with an operating range up to 22.5 mA, 12-bit digital resolution, and line monitoring.

Each input includes a short-circuit-proof transmitter supply rated at 26.5 VDC and 30 mA, supporting two-wire and three-wire transmitters. The module is TÜV-certified for safety-related applications up to SIL 3 under IEC 61508, IEC 61511, and IEC 62061, as well as Category 4 and PL e under EN ISO 13849-1. It installs in a HIMax base plate and connects to field wiring through a compatible connector board and system cable.

 

Key Technical Specifications

Category Specification
Product type HIMax analog input module
Part number 985210213
Number of input channels 32
Input signal range 0/4–20 mA
Operating range 0–22.5 mA
Digital resolution 12-bit
Measurement method Internal 200 Ω shunt; maximum shunt current 50 mA
Input withstand voltage 10 VDC maximum
Common-mode interference suppression Greater than 60 dB at 50/60 Hz
Sampling time 2 ms
Settling time 15 ms to reach 99% of process value
Metrological accuracy ±0.15% of final value from −10 to 70°C
Transmitter supplies 32 short-circuit-proof supplies
Transmitter supply output 26.5 VDC, +0/−15%; maximum 30 mA per supply
Supply monitoring thresholds Undervoltage 22.5 VDC; overvoltage 30 VDC
Maximum short-circuited supplies 12 simultaneously
Maximum loop load 750 Ω at 22.5 mA, including transmitter and line
Supply voltage 24 VDC, −15% / +20%; ripple factor 5% or less
Supply current Minimum 500 mA without channel/transmitter supply; maximum 1.5 A with transmitter supplies short-circuited
Galvanic isolation Common AI− isolated from system bus and 24 VDC supply
Operating temperature 0 to 60°C
Storage temperature −40 to 85°C
Relative humidity Maximum 95%, non-condensing
Degree of protection IP20
Dimensions 310 × 29.2 × 230 mm (H × W × D)
Weight Approximately 1.4 kg
Safety certification SIL 3, IEC 61508 / IEC 61511 / IEC 62061; Category 4 and PL e, EN ISO 13849-1

 

Engineering Selection Highlights

  • The X-AI3201 provides 32 current-input channels in one HIMax module, making it appropriate when a safety application requires high-density 4–20 mA signal acquisition.
  • Its 0/4–20 mA input range and 22.5 mA operating range must be matched to the connected transmitter’s output signal.
  • Each channel includes an integrated short-circuit-proof transmitter supply, allowing two-wire or three-wire transmitters with a maximum supply current of 30 mA.
  • The 750 Ω maximum loop load at 22.5 mA includes both transmitter and cable resistance, so loop resistance must be checked during design.
  • Line monitoring supports fault detection in the analog input circuit.
  • The module requires a compatible HIMax connector board and system cable; the connector board and cable must be selected for the intended field-termination arrangement.
  • Its SIL 3, Category 4, and PL e certification scope applies to safety-related use within the applicable HIMax system configuration.
X-AI3201 985210213

X-AI3201 985210213

X-AI3201 985210213

X-AI3201 985210213

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Automation system HIMA HIMax programmable electronic system The module is intended for use in HIMax safety systems.
Base plate Any HIMax base plate slot except slots reserved for system bus modules Select an available I/O slot during cabinet layout.
Field connection Suitable HIMax connector board required Examples include X-CB 008 01 with screw terminals and X-CB 008 03 with cable plugs.
System cable Compatible HIMax system cable required Documented examples include X-CA 005 and X-CA 009, selected according to the connector board.
Input signal 0/4–20 mA current signal The module evaluates current inputs up to 22.5 mA.
Transmitters Two-wire or three-wire transmitters, maximum 30 mA supply current Each channel has an assigned short-circuit-proof transmitter supply.
Transmitter supply load Maximum 750 Ω at 22.5 mA The limit includes transmitter and line resistance.
Power supply 24 VDC, −15% / +20%; ripple factor 5% or less Verify the power budget, including the 1.5 A maximum short-circuit condition.
Engineering environment HIMax safety system Configure and integrate the module within the applicable HIMax system engineering environment.

 

Dimensions, Mounting & Connection Notes

Item Verified data
Dimensions 310 mm high × 29.2 mm wide × 230 mm deep
Weight Approximately 1.4 kg
Mounting method Insertion into a HIMax base plate slot
Permitted slot location Any base plate slot except slots reserved for system bus modules
Degree of protection IP20
Field connection Via a compatible HIMax connector board
Connector board examples X-CB 008 01 with screw terminals; X-CB 008 03 with cable plugs
System cable examples X-CA 005 and X-CA 009, depending on connector board compatibility
Operating temperature 0 to 60°C
Storage temperature −40 to 85°C
Relative humidity Maximum 95%, non-condensing

 

Detailed Product Overview

The HIMA X-AI3201 985210213 is a high-density analog input module for the HIMax programmable electronic system. It provides 32 analog current inputs with a nominal range of 0/4–20 mA and an operating range extending to 22.5 mA. Each input is measured and functionally tested using two internal measuring facilities, supporting the module’s role in safety-related signal acquisition.

The module uses a 200 Ω internal shunt for current measurement, with a maximum permissible shunt current of 50 mA. Its 12-bit digital resolution, 2 ms sampling time, and 15 ms settling time define its signal-acquisition behavior. The documented metrological accuracy is ±0.15% of final value across the −10 to 70°C temperature range.

Each of the 32 channels has an assigned short-circuit-proof transmitter supply. The supply output is 26.5 VDC with a permissible deviation of +0/−15% and is limited to 30 mA. The module supports two-wire and three-wire transmitters. The maximum connectable loop load, including transmitter and line resistance, is 750 Ω at 22.5 mA. Supply monitoring detects undervoltage at 22.5 VDC and overvoltage at 30 VDC.

The module’s power input requires 24 VDC with a tolerance of −15% to +20% and a ripple factor of 5% or less. Without channel or transmitter supply load, the module draws at least 500 mA. If transmitter supplies are short-circuited, the maximum current draw is 1.5 A. Up to 12 transmitter supplies may be short-circuited simultaneously; if more than 12 remain short-circuited for longer than 3 seconds, the entire transmitter supply is switched off. If the overload clears within 30 seconds, the transmitter supply is switched on again.

The X-AI3201 must be installed in a HIMax base plate and connected to field wiring through a suitable connector board and system cable. Documented connector-board options include the X-CB 008 01 screw-terminal version and the X-CB 008 03 cable-plug version. Compatible system cables include the X-CA 005 and X-CA 009, selected according to the connector board used.

The module is TÜV-certified for safety-related applications up to SIL 3 under IEC 61508, IEC 61511, and IEC 62061, and up to Category 4 and PL e under EN ISO 13849-1. Its IP20 housing measures 310 × 29.2 × 230 mm and weighs approximately 1.4 kg. The module operates from 0 to 60°C, can be stored from −40 to 85°C, and tolerates up to 95% non-condensing relative humidity.

 

Applications & System Role

The X-AI3201 is an analog signal-acquisition module in a HIMA HIMax safety system. It converts up to 32 transmitter current signals into digital values for evaluation by the HIMax controller and supports safety-related analog measurements with line monitoring.

Each input is measured and functionally tested using two internal measuring facilities. The module’s integrated transmitter supplies support two-wire and three-wire transmitters, allowing the module to power and monitor field transmitters within its 30 mA per-channel supply limit.

Typical fit scenarios are safety instrumented functions that require high-density 4–20 mA process measurements, such as pressure, level, flow, or temperature transmitters, where the signal path and transmitter supply must be monitored as part of the safety application.

 

FAQ

What is the HIMA X-AI3201 985210213?
The HIMA X-AI3201 985210213 is a 32-channel analog input module for the HIMA HIMax safety system. It evaluates 0/4–20 mA transmitter signals and includes line monitoring and integrated transmitter supplies.

How many analog inputs does the X-AI3201 provide?
It provides 32 analog current-input channels with a common AI− ground.

What input signal range does the X-AI3201 support?
It supports 0/4–20 mA inputs, with an operating range up to 22.5 mA.

Does the X-AI3201 supply power to transmitters?
Yes. Each channel has a short-circuit-proof transmitter supply providing 26.5 VDC at up to 30 mA for two-wire or three-wire transmitters.

What is the maximum transmitter loop load?
The maximum connectable load, including transmitter and line resistance, is 750 Ω at 22.5 mA.

Which safety certifications apply to the X-AI3201?
The module is TÜV-certified for safety-related applications up to SIL 3 under IEC 61508, IEC 61511, and IEC 62061, and up to Category 4 and PL e under EN ISO 13849-1.

Which mounting hardware does the X-AI3201 require?
The module must be installed in a HIMax base plate and connected through a compatible connector board and system cable, such as the X-CB 008 01 or X-CB 008 03 connector board with an appropriate X-CA cable.

What are the module’s environmental limits?
The X-AI3201 operates from 0 to 60°C, can be stored from −40 to 85°C, and tolerates up to 95% non-condensing relative humidity. Its protection rating is IP20.