Description
Core Product Summary
The Honeywell SC-UCMX01 (associated part number 51307195-175) is a non-redundant controller for the ControlEdge RTU / ControlEdge 2020 Platform (also referenced in RTU2020 configurations). It combines a Control Processor Module (CPM) with an Input/Output Termination Assembly (IOTA) and provides 28 mixed onboard I/O channels.
This module serves as the core processing and termination unit for remote automation applications. It supports integration with Experion SCADA systems and is designed for distributed field control in oil & gas, pipeline, and remote asset monitoring environments. The SC-UCMX01 is applicable to firmware versions R151 and lower; later platforms use the SC-UCMX02 variant with increased memory.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Non-redundant RTU controller (CPM + IOTA) |
| Platform | ControlEdge RTU / ControlEdge 2020 / RTU2020 |
| Onboard I/O | 28 mixed channels (typical configuration: 8 AI, 2 AO, 10 DI, 6 DO, 2 PI/DI) |
| Power Supply | 24 VDC nominal (18–30 VDC range) |
| Maximum Input Current | 1.20 A at 30 VDC (controller with expansion) |
| Mounting | DIN rail (TH35-7.5) |
| Operating Temperature | –40 °C to +75 °C (platform dependent) |
| Communication | Ethernet and serial ports supporting industrial protocols (Modbus, DNP3, etc.) |
| Redundancy | Non-redundant design |
| Firmware Applicability | R151 and lower (SC-UCMX02 for later releases) |
Detailed Product Overview
The SC-UCMX01 is part of Honeywell’s modular ControlEdge RTU architecture. The controller consists of a CPM that performs processing and control functions, plugged onto a passive IOTA that provides field wiring terminals and mechanical mounting.
The onboard mixed I/O supports analog inputs (including HART-capable channels in supported configurations), analog outputs, discrete inputs, discrete outputs, and pulse inputs. Expansion I/O modules can be added via the expansion connector on the IOTA for larger point counts.
The design emphasizes low power consumption, wide temperature operation, and simplified field wiring. It is intended for remote sites where reliable data acquisition, local control logic, and communication with a central SCADA system (such as Experion) are required. The complete SC-UCMX01 assembly includes both the processor module and the termination assembly, reducing the number of separate components needed for a basic non-redundant RTU.

SC-UCMX01 51307195-175

SC-UCMX01 51307195-175
Dimensions, Mounting & Connection Notes
The complete non-redundant controller assembly mounts on standard 35 mm DIN rail. Exact overall dimensions vary slightly by configuration, but the module is compact for panel or cabinet installation. Field wiring terminates on the IOTA terminal strips. Ethernet and serial ports are provided on the CPM for network and device communications. Adequate clearance and proper grounding must be observed per Honeywell ControlEdge installation guidelines.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Platform | ControlEdge RTU / ControlEdge 2020 | Also referenced with RTU2020 configurations |
| Controller Type | Non-redundant (SC-UCMX01) | Redundant option is SC-UCNN11 |
| Successor Model | SC-UCMX02 | Higher memory; for firmware after R151 |
| IOTA | Included in SC-UCMX01 assembly (related part 51307198-175 commonly listed) | Passive termination assembly |
| Expansion I/O | Compatible with ControlEdge expansion modules (e.g., SC-UMIX01, SC-UCNN11) | Via expansion connector |
| SCADA Integration | Experion SCADA / Experion PKS | Supports standard industrial protocols |
| Power | 24 VDC (18–30 VDC) | Dual or redundant power arrangements possible at system level |
| Mounting | 35 mm DIN rail | Vertical orientation in enclosure |
FAQ
What is the Honeywell SC-UCMX01 51307195-175?
It is a non-redundant controller (CPM + IOTA) for the ControlEdge RTU / ControlEdge 2020 platform, providing 28 mixed onboard I/O channels.
What I/O does it include?
28 mixed channels, typically configured as analog inputs, analog outputs, discrete inputs, discrete outputs, and pulse inputs.
Is this a redundant controller?
No. It is the non-redundant version. The redundant controller is a different model (SC-UCNN11).
What power supply does it require?
24 VDC nominal, with an acceptable range of 18–30 VDC.
Is it compatible with later ControlEdge firmware?
The SC-UCMX01 applies to firmware R151 and lower. Later releases use the SC-UCMX02 variant.
What systems does it integrate with?
It is designed for use with Experion SCADA and other systems supporting standard industrial protocols such as Modbus and DNP3.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626