Description
Core Product Summary (Brand / Model / Key Attributes)
The Honeywell TK-CCR014 (Order Code: 51402573-250 / 97332573) is a conformal-coated redundant ControlNet Interface (CNI) module engineered for Honeywell’s Experion Process Knowledge System (PKS) and C200 controller architectures. Operating as a critical network interface card within chassis-based control assemblies, this unit establishes high-availability communication backbones between supervisory controllers, I/O racks, and process nodes over redundant ControlNet media.
Designed specifically for harsh industrial processing environments, the TK-CCR014 features factory-applied conformal coating to protect circuit components against ambient moisture, airborne contaminants, and corrosive chemical vapors. The card incorporates dual independent network channels supporting automatic hardware failover, ensuring uninterrupted control loop data exchange and deterministic system response during primary network link disruptions.
Key Technical Specifications
| Specification Parameter | Technical Value / Standard |
| Manufacturer | Honeywell |
| Model / Part Number | TK-CCR014 (Coated Variant of TC-CCR014) |
| Assembly / Board Part Numbers | 51402573-250 / 97332573 / PN-14251 |
| Product Category | Redundant ControlNet Interface (CNI) Module |
| System Compatibility | Honeywell Experion PKS / C200 Controller Chassis |
| Communication Protocol | ControlNet / CIP (Common Industrial Protocol) |
| Communication Speed | 5 Mbps |
| Media Redundancy | Dual Independent Channels (Channel A / Channel B) |
| Environmental Protection | Conformal Coated Circuit Board (TK prefix) |
| Power Supply Input | 24 VDC (Internal backplane power) |
| Power Consumption | < 5 W |
| Node Addressing | Hardware Rotary / DIP Switch Configurable |
| Operating Temperature | -40°C to +70°C |
| Relative Humidity | 5% to 95% RH (non-condensing) |
| Approximate Weight | 0.45 kg (1.0 lb) |
Detailed Product Overview
The Honeywell TK-CCR014 serves as a dedicated communication link inside the Experion PKS hardware framework, linking local controller backplanes to supervisory networks and remote I/O sub-networks. By adhering to the deterministic ControlNet profile, the module guarantees time-critical process data transport between C200 control execution engines and distributed process modules.
The “TK” prefix designates a factory conformal-coated assembly, distinguishing it from standard uncoated cards (“TC” prefix). This protective coating shields fine-pitch surface-mount components, trace runs, and internal semiconductor packages against sulfur-bearing environments, high humidity, and airborne particulate accumulation typically encountered in oil refineries, chemical plants, and pulp-and-paper facilities.
Integrated diagnostic status LEDs provide real-time visual feedback on power availability, module health, network activity, and channel-specific error states. In a fully redundant configuration, the TK-CCR014 continuously monitors physical link integrity across both ControlNet cable paths, automatically rerouting network traffic in less than 100 milliseconds if a cable break, connector failure, or signal attenuation event occurs.

TK-CCR014

TK-CCR014
Engineering Selection Highlights
- Conformal Coating (TK Series): Provides long-term insulation protection and corrosion resistance for deployment in Class G3 harsh environmental zones.
- Dual-Channel Redundancy: Provides automatic hardware switchover between redundant ControlNet physical channels to maintain deterministic control uptime.
- Experion PKS Integration: Fully compatible with Honeywell C200 controller chassis, carrier racks, and system configuration utilities.
- Hardware Node Addressing: Built-in rotary switches allow direct physical setting of ControlNet node addresses prior to chassis insertion.
- Low Power Dissipation: Operates efficiently under 5 Watts, minimizing thermal loading within high-density control racks.
System Compatibility & Integration Requirements
| System Component / Layer | Compatibility / Integration Requirement | Practical Note |
| Control System Architecture | Honeywell Experion PKS / C200 DCS Platform | Primary CNI module for supervisory and I/O bus communication. |
| Chassis / Base Rack | Honeywell Standard C200 Chassis / Slot Backplane | Fits standard chassis slots; requires backplane power and communication rails. |
| Physical Network Cabling | Standard ControlNet Coaxial or Fiber Media Taps | Connects via dual BNC drop cables or media converters to trunk lines. |
| Software & Firmware | Experion Control Builder / System Engineering Tools | Firmware must match system software release specifications. |
Dimensions, Mounting & Connection Notes
- Form Factor: Standard slot-in circuit card assembly designed for Honeywell chassis backplane mounting.
- Physical Dimensions: Approximately 160 mm × 100 mm × 25 mm (Standard module footprint).
- Mounting Method: Direct insertion into designated chassis slot with front-panel locking tab or captive screws.
- Network Interface Ports: Dual front-panel connectors for redundant Channel A and Channel B ControlNet drop cables.
- Grounding Requirements: Chassis backplane grounding must be maintained to prevent high-frequency common-mode noise on ControlNet coaxial segments.
FAQ
What is the difference between Honeywell TK-CCR014 and TC-CCR014?
The functional design and circuit architecture are identical; however, the “TK” prefix specifies that the circuit board features a protective conformal coating for harsh environments, whereas the “TC” prefix indicates a standard uncoated board.
What system is the TK-CCR014 designed for?
It is designed for Honeywell process control platforms, specifically Experion PKS and C200 controller architectures utilizing ControlNet communication.
Does the TK-CCR014 support network redundancy?
Yes, it features dual independent network ports (Channel A and Channel B) supporting automatic hardware failover to ensure continuous communication during single-cable failures.
What is the communication speed of the TK-CCR014?
The module operates at a standard ControlNet transmission speed of 5 Mbps.
How is the node address set on the module?
Node addressing is set manually using on-board rotary or DIP switches before inserting the card into the control rack.
Verification & Troubleshooting Notes
- Conformal Coating Inspection: When replacing cards in corrosive environments, verify that the replacement unit carries the “TK” designation to ensure long-term environmental protection.
- LED Diagnostic Indicators: Monitor the front-panel status LEDs during power-up: a solid green light indicates normal operation, while alternating or solid red/amber states signal communication loss or hardware fault conditions.
- ControlNet Tap Connections: Ensure that BNC drop-cable connections on Channel A and Channel B are securely locked to their respective taps; loose connectors are a primary cause of intermittent network failover errors.
- Node Address Verification: Confirm that the physical rotary switch address on the replacement module strictly matches the assigned node address in Experion Control Builder before applying backplane power.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626