Sale!

ICS Triplex T8151B Trusted TMR Communications Module

The ICS Triplex T8151B is a Trusted Communications Interface (CI) module for the Trusted TMR safety system. It provides external communication services for the Trusted Controller and reduces the communications workload on the Triple Modular Redundant (TMR) Processor.

Categories: , , , , SKU: T8151B Brand:

Description

Core Product Summary

The ICS Triplex T8151B is a Trusted Communications Interface (CI) module for the Trusted TMR safety system. It provides external communication services for the Trusted Controller and reduces the communications workload on the Triple Modular Redundant (TMR) Processor.

The module supports dual Ethernet ports and four isolated rear serial ports plus a front-panel diagnostic RS-232 port. It can be installed in a controller or expander chassis I/O slot and allows up to four Communications Interfaces per Trusted system. Peer-to-peer communications require installation in the controller chassis. Power is supplied from the chassis backplane at 20–32 V DC.

 

Key Technical Specifications

Parameter Value
Product type Trusted Communications Interface (CI)
System family Trusted TMR / Trusted 8000 Series
Ethernet ports Dual (revision-dependent: 10Base2/10BaseT up to rev B; 10BaseT/100BaseT from rev C)
Rear serial ports 4 isolated: 2 × RS-232/422/485 + 2 × RS-422/485
Front diagnostic port 1 × isolated RS-232
Power supply 20–32 V DC from chassis backplane
Power rating 10 W (T8151B Series B)
Maximum modules per system 4 Communications Interfaces
Chassis location Controller or expander chassis I/O slot (peer-to-peer restricted to controller chassis)
Operating temperature 0 °C to +60 °C
Non-operating temperature –25 °C to +70 °C
Relative humidity 10 % to 95 %, non-condensing

 

Detailed Product Overview

The ICS Triplex T8151B functions as an intelligent communications gateway within a Trusted TMR architecture. By handling external data exchange independently, it offloads protocol processing, framing and media access from the main TMR Processor, allowing the safety controller to focus on application execution and voting.

The module runs the Trusted Operating System on a PowerPC processor. Bootstrap code resides in EPROM while operational firmware is stored in flash memory and can be upgraded through the front-panel diagnostic port. Dual-redundant 24 V DC power is taken from the chassis Inter-Module Bus (IMB) backplane; an on-board supply provides conversion and protection.

Hardware revisions affect the Ethernet media and internal construction. Modules up to revision B provide dual 10Base2/10BaseT Ethernet with serial ports on a daughter board. Revision C and later modules use dual 10BaseT/100BaseT Ethernet, integrate the serial ports on the main board, incorporate a faster processor, and retain a backup system event log.

Supported services include Modbus RTU (slave as standard; master requires a T8122 or T8123 Processor Interface Adapter), Open Modbus TCP (slave), Trusted Peer-to-Peer, Trusted Enhanced Peer-to-Peer, and related industrial protocols. Optional Sequence of Events (SOE) transfer over Modbus is available. The front-panel port provides local diagnostics and configuration access via the dedicated maintenance cable.

The T8151B occupies a single-width I/O slot. Rear access to the communication ports is typically provided by the T8153 Communications Interface Adapter. Status LEDs on the front panel indicate overall health, active/standby state and activity on each Ethernet and serial port.

 

Dimensions, Mounting & Connection Notes

  • Module form factor: Single-width Trusted I/O module
  • Typical dimensions (standard Trusted single-width module): approximately 266 mm (H) × 31 mm (W) × 303 mm (D)
  • Weight: approximately 1.13 kg
  • Mounting: Inserts into a single-width I/O slot of a T8100 or T8300 chassis; secured by ejector levers
  • Power connection: Taken automatically from the chassis Inter-Module Bus backplane
  • Front panel: Diagnostic RS-232 port and status LEDs (Healthy, Active, Standby, Educated, Ethernet 1/2, Serial 1–4)
  • Rear connections: Made via T8153 adapter (Ethernet and serial ports) when required
T8151B

T8151B

T8151B

T8151B

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
System family Trusted TMR / Trusted 8000 Series Communications Interface for Trusted Controller
Chassis T8100 Controller Chassis or T8300 Expander Chassis Single-width I/O slot
Peer-to-peer location Controller chassis only Required for Trusted Peer-to-Peer links
Maximum quantity 4 Communications Interfaces per Trusted system System design limit
Power 20–32 V DC from chassis backplane Dual-redundant feed
Rear port access T8153 Communications Interface Adapter Provides physical connectors for Ethernet and serial ports
Modbus Master function T8122 or T8123 Processor Interface Adapter Required for master operation
Diagnostic access TC-304-01 maintenance cable Connects front RS-232 port to engineering workstation
Firmware Module-specific firmware versions Must match system release and hardware revision

 

FAQ

What is the ICS Triplex T8151B?
It is a Trusted Communications Interface module that provides external data links for a Trusted TMR controller and reduces the communications load on the TMR Processor.

Where can the T8151B be installed?
It occupies a single-width I/O slot in a T8100 Controller Chassis or T8300 Expander Chassis. Peer-to-peer communications require installation in the controller chassis.

How many T8151B modules can a Trusted system support?
A maximum of four Communications Interfaces can be installed in one Trusted system.

What communication ports does the T8151B provide?
Dual Ethernet ports (media type depends on hardware revision), four isolated rear serial ports (two RS-232/422/485 and two RS-422/485), and one front-panel isolated RS-232 diagnostic port.

What power does the module require?
It draws dual-redundant 20–32 V DC power from the chassis backplane and is rated at 10 W for Series B hardware.

Is a special adapter needed for rear connections?
Yes. The T8153 Communications Interface Adapter is used to bring the Ethernet and serial ports to the rear of the chassis for external cabling.

Can the T8151B act as a Modbus Master?
Modbus Slave operation is standard. Modbus Master functionality requires the addition of a T8122 or T8123 Processor Interface Adapter.