Sale!

IMS MX-CS100-401 MicroLYNX-4 Stepper Motor Controller

  • Model: MX-CS100-401
  • Brand: Intelligent Motion Systems (IMS / Novanta)
  • Series: MicroLYNX-4 Series
  • Core Function: Integrates a microstepping motor driver with a programmable motion controller.
  • Product Type: Programmable Stepper Motor Driver & Controller
  • Key Specs: 12–48 VDC | Bipolar Microstepping | Isolated I/O
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Legacy / Obsolete EOL item requiring managed strategic buffer stocking.
Categories: , , , , SKU: MX-CS100-401 Brand:

Description

Key Technical Specifications

Parameter Value
Controller Platform MicroLYNX-4 Programmable Motion Controller
Motor Compatibility 2-phase or 4-phase bipolar stepper motors
Operating Voltage (Logic/Drive) 12 to 48 VDC
Microstepping Resolution Programmable up to 51,200 steps per revolution
Communication Interfaces RS-422 / RS-485 serial, optional CANopen network support
Digital Inputs / Outputs Isolated digital inputs and outputs (+5 to +24 VDC range)
Command Processing Local IMS Instruction Set / Mini-PLC execution environment
Enclosure Dimensions Ultra-compact panel mount footprint (~2.4 x 3.5 x 2.9 inches)
Operating Temperature 0 to +70°C ambient storage and operation
Diagnostic Indicators Status LEDs for power, communication traffic, and error states

 

Product Introduction & Supply Chain Strategy

The IMS MX-CS100-401 is a compact, highly integrated programmable stepper motor controller and driver belonging to the MicroLYNX-4 family. It combines advanced microstepping drive circuitry with an onboard processor capable of executing standalone motion control programs or responding dynamically to master PLC commands via RS-422/485 serial communication. Automation engineers deploy this unit in precision positioning equipment, medical diagnostic hardware, and automated optical inspection cells where panel space is constrained and deterministic motion control is mandatory.

Procuring this component as a Brand New Surplus unit neutralizes the severe operational risks tied to secondary-market hardware. Because this precise motion controller generation is long past its active manufacturing lifecycle, open-market alternatives are often contaminated by pulled parts with degraded internal bus buffers or heat-fatigued power stages. Securing certified New Surplus inventory guarantees OEM-level reliability, eliminates unexpected infant mortality failures, and controls Total Cost of Ownership (TCO) by safeguarding against catastrophic line stoppages.

MX-CS100-401

MX-CS100-401

MX-CS100-401

MX-CS100-401

Installation & Configuration Guide

Stage 1: Pre-Installation (Prep & Safety)

  1. Execute plant Lock-Out/Tag-Out (LOTO) procedures for the targeted control cabinet.
  2. Put on an ESD-safe grounded wrist strap before touching any electronic modules.
  3. Document all existing wiring connections, communication address settings (baud rate / node IDs), and terminal block layouts.

Stage 2: Removal

  1. Disconnect the main DC power supply and verify zero energy state with a multimeter.
  2. Carefully unplug the pluggable screw terminal connectors for power, motor phases, and I/O.
  3. Release the unit from its mounting chassis and extract it smoothly.

Stage 3: Installation (Clone & Seat)

  1. Match any hardware jumpers or configuration settings on the new MX-CS100-401 to your pre-removal documentation.
  2. Secure the unit firmly to the panel mounting surface.
  3. Reconnect pluggable terminal blocks securely, ensuring no stray wire strands cause short circuits between power and logic pins.

Stage 4: Power-On & Testing

  1. Restore clean 12–48 VDC power to the system and observe the status LEDs for normal power-on self-test indications.
  2. Establish serial communication via a configuration terminal to verify parameter registers and node assignments.
  3. Execute low-speed jog commands to validate motor phasing, limit switch inputs, and positioning feedback loops before releasing the machine back to production.

 

Firmware/Software Versions & Upgrade Notes

  • Recommended Firmware: Standard factory release matching your application’s established motion program baseline (e.g., V1.5xx series builds).
  • Compatibility Warnings: Verify that the serial communication protocol configuration matches your host controller settings. Mismatched baud rates or packet formatting will trigger communication timeouts.
  • Upgrade Risk Advisory: Avoid flashing firmware updates during active production windows. Always test program logic and firmware changes on a dedicated bench-development rack prior to field implementation.

 

Frequently Asked Questions (FAQ)

Why is this unit priced higher than general consumer-grade motor drivers?

Our pricing reflects the exact cost of sourcing genuine New Surplus industrial automation inventory globally. While cheaper alternatives or repairs carry hidden failure risks, our inventory buys you zero operational wear, original packaging, and complete peace of mind.

Is this unit an original factory-sealed part?

Yes. This product is a Brand New Surplus unit. It has never been deployed in an active production facility, never pulled from a decommissioned chassis, and never subjected to component-level board repairs.

What is the obsolescence status of the MX-CS100-401?

This controller is officially legacy and discontinued by the original manufacturer. Because active factory channels are closed, holding 1-2 new units on-site as strategic buffer stock is vital to avoid extended downtime.

Can I hot-swap this motion controller?

No. Disconnecting or plugging in terminal blocks while the DC power bus is energized causes electrical arcing, damages connector pins, and risks shorting out internal logic components. Always power down the cabinet completely.

Will my application program be stored on the replacement unit?

The unit ships with baseline firmware. User-written motion programs, velocity profiles, and parameter configurations must be downloaded to the module post-installation via its serial interface.

What warranty terms apply to this New Surplus module?

This unit includes a comprehensive 1-year replacement warranty, validating our commitment to uncompromised industrial reliability and supply-chain transparency.