Sale!

Johnson Controls MS-NAE5510-1 Metasys Network Automation Engine

  • Model: MS-NAE5510-1
  • Brand: Johnson Controls
  • Series: Metasys NAE55
  • Core Function: Network Automation Engine / Supervisory Controller
  • Product Type: Building Automation Network Engine
  • Key Specs: Supports 2 N2 or 2 BACnet MS/TP trunks (or 1 of each); up to 100 devices per trunk; Ethernet + multiple serial ports
  • Condition: New Original / New Surplus
Categories: , , , , SKU: MS-NAE5510-1 Brand:

Description

3. Key Technical Specifications

  • Power input: 24 VAC (Class 2 / SELV)
  • Power consumption: 50 VA maximum
  • Supported trunks: 2 N2, 2 BACnet MS/TP (RS-485), or 1 N2 + 1 BACnet MS/TP
  • Maximum devices per trunk: 100
  • Ethernet: 1 × 10/100 Mbps (RJ-45)
  • Serial ports: 2 × RS-232-C, 2 × USB serial, 2 × optically isolated RS-485
  • Memory: 512 MB Flash, 256 MB Synchronous DRAM
  • Data protection battery: Included (MS-BAT1010-0 or equivalent)
  • Housing: Plastic with internal metal shield
  • Protection rating: IP20
  • Mounting: Panel or DIN rail compatible
  • Operating temperature: Typically 0 °C to 50 °C
  • Certifications: BACnet BTL (B-BC), FIPS 140-2 Level 1 (later firmware), CE, etc.
  • Note: Exact firmware revision and any UL smoke-control variants (e.g., -0U / -1U) must be confirmed against the unit label.

4. Product Introduction

The Johnson Controls MS-NAE5510-1 is a Network Automation Engine from the Metasys NAE55 series. It serves as a supervisory controller that manages field devices, scheduling, alarming, and data collection across building automation systems.

This engine supports flexible N2 and BACnet MS/TP trunk configurations, providing a reliable bridge between field controllers and higher-level Metasys or enterprise systems. It is widely used in commercial buildings, campuses, hospitals, and industrial facilities for HVAC, lighting, and energy management applications.

MS-NAE5510-1

MS-NAE5510-1

MS-NAE5510-1

MS-NAE5510-1

5. Troubleshooting Quick Reference

Symptom Possible Cause Relevance to this Part Quick Check Method Recommendation
Unit does not power up Missing or incorrect 24 VAC supply ✅ High Measure voltage at power terminals Verify dedicated 24 VAC Class 2 supply and polarity
No communication on trunks Incorrect trunk type, EOL, or wiring ✅ High Check RS-485 wiring, EOL switches, and baud rate Confirm N2 or BACnet MS/TP configuration and termination
Ethernet link down Cable, switch, or IP configuration issue ✅ High Check link LEDs and network settings Verify Ethernet cable and IP addressing
Frequent reboots or data loss Failed data protection battery ✅ High Check battery status in diagnostics Replace the data protection battery
Cannot connect via web interface Firmware, network, or security settings ✅ Medium Verify IP address and browser compatibility Reset network settings if necessary or update firmware
Devices not discovered Trunk overload or addressing conflict ✅ Medium Review device count and addressing Keep device count within 100 per trunk and resolve conflicts

If the issue cannot be resolved, photograph the unit (including labels and status LEDs), note the firmware revision, and contact technical support with system details.

6. Frequently Asked Questions (FAQ)

Q: What is the primary function of the MS-NAE5510-1?
A: It is a Network Automation Engine that acts as a supervisory controller in Metasys building automation systems, managing field controllers, schedules, alarms, and data.

Q: Which field networks does it support?
A: It supports two N2 trunks, two BACnet MS/TP trunks, or one of each, with up to 100 devices per trunk.

Q: What power supply is required?
A: A dedicated 24 VAC Class 2 (or SELV) power supply, maximum 50 VA.

Q: Does it include a data protection battery?
A: Yes. A rechargeable data protection battery is included to preserve configuration and operational data during power loss.

Q: Can it be used for smoke control applications?
A: Standard MS-NAE5510-1 is not the UL smoke-control variant. For smoke control, look for the specific -0U or -1U versions that carry the appropriate UL 864 listing.

Q: Is the unit web-enabled?
A: Yes. It provides a web-based user interface for configuration, monitoring, and operation.

Q: What condition and warranty do you offer?
A: We supply New Original / New Surplus stock. Units are inspected for basic functionality. Standard coverage is a 1-year warranty against defects. Always provide the complete model MS-NAE5510-1 (and firmware revision if known) when ordering or requesting support.