Sale!

Kollmorgen S30301-NA SERVOSTAR 343 Servo Drive

The Kollmorgen S30301-NA is a SERVOSTAR 343 digital brushless AC servo amplifier in the S300 series. It controls a compatible servo motor within a machine’s motion-control architecture, providing the electrical drive stage between the AC supply, motor, and control interfaces. The model belongs to the S300 high-voltage class designed for three-phase AC supplies.

Categories: , , , SKU: S30301-NA Brand:

Description

Core Product Summary

The Kollmorgen S30301-NA is a SERVOSTAR 343 digital brushless AC servo amplifier in the S300 series. It controls a compatible servo motor within a machine’s motion-control architecture, providing the electrical drive stage between the AC supply, motor, and control interfaces. The model belongs to the S300 high-voltage class designed for three-phase AC supplies.

The S30301-NA has a rated installed power of 3.3 kVA for continuous S1 operation. Its published output-current ratings vary with supply voltage: 5 A RMS at 230 V, 4 A RMS at 400 V, and 3 A RMS at 480 V, with a peak output rating of 7.5 A RMS for up to five seconds. The NA configuration is the base-device version, with CANopen available onboard. When integrating this drive, match the supply voltage, motor feedback, control method, and communication configuration to the existing machine rather than relying on the S300 family name alone.

 

Key Technical Specifications

Parameter Specification
Manufacturer Kollmorgen
Model / order number S30301-NA
Product designation SERVOSTAR 343
Product family SERVOSTAR 300 (S300)
Product type Digital brushless AC servo amplifier
Rated supply voltage Three-phase, 208–480 VAC, with specified voltage tolerance
Rated installed power 3.3 kVA for S1 operation
Rated output current at 230 V three-phase 5 A RMS
Rated output current at 400 V three-phase 4 A RMS
Rated output current at 480 V three-phase 3 A RMS
Peak output current 7.5 A RMS, maximum 5 seconds
Rated DC-link voltage 560–675 VDC
Standard communication CANopen
Setup interface RS-232
Dimensions 246 mm high × 70 mm wide × 171 mm deep without connectors
Maximum listed depth with connectors Less than 235 mm
343 S30301-NA

343 S30301-NA

343 S30301-NA

343 S30301-NA

Detailed Product Overview

The Kollmorgen S30301-NA SERVOSTAR 343 is intended for brushless servo motion systems that require a digital amplifier operating from a three-phase AC supply. In a machine architecture, the amplifier receives power from the electrical distribution system, processes motion commands, and supplies controlled electrical output to a compatible motor. Its selection therefore involves more than matching the product number: the supply, motor, feedback device, control interface, and operating duty must all be suitable for the application.

Electrical characteristics and motor sizing

The S30301-NA belongs to the S300 208–480 VAC voltage class. Its output-current rating changes with the applied supply voltage, so the current value must be selected from the rating corresponding to the actual operating supply. The 7.5 A RMS peak rating is specified for a maximum duration of five seconds; it should not be treated as a continuous output rating.

For machine sizing, engineers should compare the drive’s voltage-dependent current capacity with the motor’s rated current and transient demand. Acceleration, deceleration, load inertia, and regenerative energy also influence the complete drive-system design. The 3.3 kVA installed-power rating for S1 operation is a separate selection parameter and should not be substituted for the motor output-current rating.

Control and communication

The S300 platform supports digital setup through an RS-232 interface and provides CANopen communication in the base configuration. These interfaces serve different purposes: the setup connection supports drive configuration, while CANopen supports communication with a compatible control system.

The required control architecture should be established before installation. Engineers should identify whether the machine uses network-based motion commands, analog or pulse-based references, or the drive’s integrated positioning functions. The appropriate interface and configuration depend on the system design.

Feedback and commissioning

Motor feedback is another critical integration point. The S300 family supports multiple feedback technologies, but the presence of a feedback option within the product family does not establish compatibility with every motor or encoder. The selected motor’s feedback type, wiring, and configuration must match the drive’s supported interface.

During commissioning, confirm the motor data, feedback configuration, current limits, control parameters, and protective functions before enabling motion. Test the machine under controlled conditions and verify that stopping, fault handling, and motion limits operate as intended.

 

System Compatibility & Integration Requirements

Item / Dependency Compatibility or Requirement Practical Note
Drive family SERVOSTAR 300 (S300) Use the S300 installation and configuration procedures.
AC supply Three-phase 208–480 VAC class Select the applicable voltage-dependent ratings and supply protection.
Communication CANopen onboard Confirm that the controller and network configuration support the required CANopen functions.
Configuration interface RS-232 Use the supported setup interface and configuration procedure.
Servo motor Compatible brushless servo motor Match motor electrical ratings and feedback requirements to the drive.
Feedback interface Depends on the motor feedback technology and supported S300 configuration Confirm the precise encoder or feedback type before connecting the motor.
Control architecture Depends on the selected command interface and application configuration Check command signals, control mode, and parameter settings.

 

Dimensions, Mounting & Connection Notes

The SERVOSTAR 343 uses a compact, panel-mounted drive enclosure. Allow sufficient cabinet space for the drive body, connectors, wiring bend radius, and the ventilation clearances specified in the applicable installation documentation.

  • Height: 246 mm.
  • Width: 70 mm.
  • Depth without connectors: 171 mm.
  • Depth with connectors: less than 235 mm.
  • Electrical installation: Connect the three-phase AC supply, protective earth, motor leads, and feedback wiring according to the applicable S300 wiring diagrams.
  • Communication: Use the designated interface and the correct cable arrangement for the selected control architecture.
  • Commissioning: Verify supply wiring, motor connections, feedback signals, grounding, and configuration before enabling the drive.

The dimensions above describe the drive envelope; they do not replace the cabinet-clearance and ventilation requirements in the installation instructions. Disconnect power before servicing and observe the specified DC-link discharge precautions.

 

FAQ

What is the Kollmorgen S30301-NA?

The Kollmorgen S30301-NA is a SERVOSTAR 343 digital brushless AC servo amplifier belonging to the S300 series.

What supply voltage does the S30301-NA support?

The drive belongs to the three-phase 208–480 VAC class. Output-current ratings depend on the operating supply voltage.

What is the rated output current of the S30301-NA?

The published ratings are 5 A RMS at 230 V, 4 A RMS at 400 V, and 3 A RMS at 480 V. The peak output rating is 7.5 A RMS for a maximum of five seconds.

Does the S30301-NA support CANopen?

Yes. CANopen is available onboard in the base-device configuration. The connected controller must support the communication functions required by the machine.

How is the S30301-NA configured?

The S300 platform supports configuration through an RS-232 interface. The appropriate configuration procedure and software must be used for the installed hardware and firmware.

Can the S30301-NA operate with any brushless servo motor?

No. Motor compatibility depends on electrical ratings, feedback technology, wiring, and configuration. These parameters must be matched before commissioning.

What dimensions should be allowed for installation?

The drive measures 246 mm high, 70 mm wide, and 171 mm deep without connectors. The listed depth with connectors is less than 235 mm. Additional cabinet clearance must follow the installation requirements.