Description
Core Product Summary
The Kongsberg RSER200-4 (part number 603444) is a four-channel galvanically isolated serial line interface module belonging to the Kongsberg RIO200 module family. It connects field equipment using RS-232, RS-422, RS-485 or NMEA 0183 to one, two or three host RCU controllers via the RBUS system. The module is designed for marine automation environments and supports hot-swap replacement.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Kongsberg Maritime AS |
| Model / Type designation | RSER200-4 |
| Part number | 603444 |
| Module family | RIO200 |
| Function | 4-channel galvanic isolated serial interface |
| Field channels | 4 (individually configurable) |
| Supported interfaces | RS-232, RS-422, RS-485, NMEA 0183 |
| Controller interfaces | Up to 3 RCU (RJ45, P1–P3) |
| Power supply | +24 VDC nominal (+18 to +32 VDC) via RBUS |
| Current consumption | 160 mA |
| Power ON inrush current | Maximum 960 mA @ 25 ms |
| Mounting | Snap-on horizontal dual-rail system |
| Hot-swap | Supported |
| Standards compliance | IEC 60945, IACS E10 |
| Status indication | Run/Error LED + TX/RX LEDs per channel |
Detailed Product Overview
The RSER200-4 provides serial communication between field devices and RCU controllers in Kongsberg automation systems. Each of the four field channels can be software-configured independently for RS-232, RS-422, RS-485 or NMEA 0183 signalling. The module interfaces to one, two or three host RCU controllers through RJ45 connectors (P1, P2, P3) and receives power and communication via the RBUS (T-BUS) dual-rail connectors.
Internal voltages are continuously monitored. Front-panel LEDs indicate overall module status (run/error) and transmit/receive activity on each channel. A USB service port supports diagnostics and monitoring. The design supports hot-swap replacement on a powered RBUS when system procedures are followed.
The module is intended for use in marine environments and meets the requirements of IEC 60945 and IACS E10.

RSER200-4

RSER200-4
System Compatibility & Integration Requirements
- Compatible with Kongsberg RIO200 module family and associated RCU controllers.
- Mounts on the standard horizontal dual-rail system used by RIO200 modules.
- Power and data connection via RBUS A and RBUS B connectors.
- Field wiring terminates on terminal blocks X1–X4.
- Controller connection uses standard RJ45 patch cables (T568B).
- Supports single, dual or triple redundant RCU configurations (master controller transmits; all controllers can receive).
- Configuration and monitoring performed through Kongsberg system tools; USB port available for service access.
Integration requires the appropriate RIO200 base/rail infrastructure and correct system software configuration of the serial parameters for each channel.
Dimensions / Mounting
Snap-on mounting on the horizontal dual-rail system used by the RIO200 family. Designed for compact installation alongside other RIO200 modules.
FAQ
What is the Kongsberg RSER200-4?
It is a four-channel galvanically isolated serial line interface module (part number 603444) in the Kongsberg RIO200 family for connecting serial field equipment to RCU controllers.
Which serial standards does it support?
Each of the four field channels can be configured as RS-232, RS-422, RS-485 or NMEA 0183.
How is the module powered?
It receives +24 VDC nominal power (+18 to +32 VDC) through the RBUS connectors.
Does it support hot-swap?
Yes. The module is designed for snap-on mounting and hot-swap replacement following system procedures.
What standards does it comply with?
IEC 60945 and IACS E10.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626