Description
Core Product Summary
The KUKA 00-132-349 is a 10-meter KCP2 teach pendant extension cable designed for the KUKA KR C2 ed05 robot controller system. It extends the connection distance between the operator pendant and the robot controller, allowing operators to work at a greater distance from the controller cabinet.
This cable is identified as a KCP2 SP extension cable. It is intended for the KCP2 pendant interface rather than the smartPAD connection architecture used by newer KUKA controller generations. The complete part number is important when selecting a replacement, particularly when maintaining an existing KR C2 ed05 installation.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | KUKA |
| Model Number | 00-132-349 |
| Alternative Part Number | 00132349 |
| Product Type | Teach Pendant Extension Cable |
| Cable Designation | KCP2 SP Cable Extension ed05 |
| Compatible Controller Family | KR C2 ed05 |
| Pendant Interface | KCP2 |
| Cable Length | 10 meters |
| Connection | X19 – X19.1 |
Detailed Product Overview
KCP2 Pendant Extension Function
The KUKA 00-132-349 is designed to extend the operating distance of a KCP2 teach pendant connected to a KR C2 ed05 robot controller.
In industrial robotic applications, the teach pendant provides the operator interface for robot programming, manual movement, setup, and maintenance operations. An extension cable allows the pendant to be positioned farther from the controller cabinet while maintaining its connection to the robot control system.
The 10-meter cable length is a key selection parameter. It helps determine whether the cable can accommodate the physical layout of the robot cell and the operator’s working position.
Controller and Pendant Compatibility
The 00-132-349 is associated with the KUKA KR C2 ed05 controller generation.
It is identified as an extension cable for KCP2 teach pendants, including the following pendant part numbers:
- 00-110-185
- 00-130-547
- 00-107-264
These identifiers are useful when checking the existing pendant configuration before ordering a replacement cable.
Connection and Installation Considerations
The documented connection designation is X19–X19.1. Engineers should check the connector arrangement and controller interface against the installed equipment documentation before installation.
The cable should be routed to avoid excessive bending, mechanical tension, crushing, and interference with robot movement. Its routing must also account for the movement envelope of the robot and associated equipment.

00-132-349
System Compatibility & Integration Requirements
| Item | Compatibility / Requirement |
|---|---|
| Robot controller | KUKA KR C2 ed05 |
| Operator interface | KCP2 teach pendant |
| Cable connection | X19 – X19.1 |
| Cable length | 10 meters |
| Pendant reference | 00-110-185 |
| Pendant reference | 00-130-547 |
| Pendant reference | 00-107-264 |
Integration note: The 00-132-349 is designed for the KCP2 connection architecture. Do not assume compatibility with KUKA smartPAD systems or KR C4 controllers based solely on connector appearance.
Dimensions, Mounting & Connection Notes
- Cable length: 10 meters.
- Connection designation: X19–X19.1.
- Intended installation: KCP2 pendant extension arrangement.
- Route the cable away from moving robot components and potential crushing points.
- Inspect connectors and cable insulation before installation.
- Follow the applicable controller documentation for connection and disconnection procedures.
FAQ
1. What is the KUKA 00-132-349?
It is a 10-meter extension cable for KUKA KCP2 teach pendants used with the KR C2 ed05 controller family.
2. What is the cable length?
The specified cable length is 10 meters.
3. Which controller does the 00-132-349 support?
It is associated with the KUKA KR C2 ed05 controller.
4. Which teach pendants are associated with this extension cable?
The documented pendant references include 00-110-185, 00-130-547, and 00-107-264.
5. What is the connection designation?
The documented connection is X19–X19.1.
6. Can the KUKA 00-132-349 be used with a smartPAD?
It is designed for the KCP2 interface. Compatibility with smartPAD systems should not be assumed.
7. What should be checked before purchasing a replacement?
Check the complete part number, controller generation, pendant model, connector arrangement, and required cable length.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626