Description
Key Technical Specifications
| Parameter | Value |
| Module Type | Analog Input Multiplexer / Expansion Unit |
| Input Channels | 16 independent analog input channels |
| Signal Compatibility | 0–20 mA current inputs, 0–10 V voltage inputs, and resistance/PT100 |
| Backplane Recognition | Automatic module type recognition via unique ID header |
| Enclosure Dimensions | 125.4 x 216 x 68 mm (DxWxH support module) |
| Mounting Standard | Standard DIN European support rail engagement |
| Terminal Connections | 8 dedicated terminal strips for direct signal interfacing |
| System Integration | Interfaces directly with analog input module (AEM) racks |
| Operating Temperature | Marine standard ambient specifications (0 to +55^\circC) |
| Power Requirements | Powered via system backplane bus rails |
Product Introduction & Supply Chain Strategy
The Lyngso Marine MXM402 is a specialized 16-channel analog input multiplexer module designed for marine automation, vessel monitoring systems, and industrial control architectures. It aggregates complex sensor signals—including current loops, voltage levels, and resistance/PT100 temperature detectors—translating field data for central processor racks. Featuring automatic module type recognition over the backplane bus, it enables seamless system scalability without manual address jumpers. Marine engineers deploy this unit to maintain legacy vessel management systems and prevent costly bridge or engine room automation faults.
Procuring this legacy component as a Brand New Surplus unit protects critical marine operations from the severe reliability risks of the open secondary market. Because the MXM402 is long out of production, unverified used modules sourced from decommissioned vessels frequently harbor salt-air corrosion, degraded internal terminal contacts, and micro-fractured circuit traces. Deploying certified New Surplus hardware guarantees original factory-grade longevity, eliminates unexpected automation failures at sea, and preserves capital efficiency by keeping Total Cost of Ownership (TCO) under strict control.

MXM402

MXM402
Installation & Configuration Guide
Stage 1: Pre-Installation (Prep & Safety)
- Isolate power and execute Lock-Out/Tag-Out (LOTO) protocols for the targeted automation rack or bridge console.
- Put on an ESD-safe grounded wrist strap before handling electronic circuit modules.
- Document all existing terminal strip connections and wire numbers interfacing with the 8 onboard connector blocks.
Stage 2: Removal
- Disconnect pluggable terminal blocks or carefully unscrew field wiring from the 8 terminal strips, ensuring each wire is tagged.
- Release the mechanical latches securing the MXM402 module to the DIN European standard support rail.
- Extract the module smoothly straight out of the rack housing, taking care not to bend backplane interface pins.
Stage 3: Installation (Clone & Seat)
- Inspect the new MXM402 New Surplus unit for pristine pin and terminal condition.
- Align the module housing with the DIN rail and snap it firmly into place.
- Reconnect all field signal wires to the corresponding terminal strips exactly as documented during pre-installation, ensuring secure torque on screw terminals.
Stage 4: Power-On & Testing
- Re-energize the automation rack and observe the system status LEDs.
- Verify that the master control unit automatically recognizes the module via its built-in identifier.
- Access the vessel management system (VMS) calibration interface to confirm that all 16 analog input channels register stable, accurate sensor readings.
Firmware/Software Versions & Upgrade Notes
- Firmware/Software Applicable: Hardware-managed multiplexing architecture utilizing automatic module identifier handshakes; no direct user-flashable firmware is required in the field.
- Compatibility Notes: Ensure backplane bus compatibility with existing AEM (analog input module) expansion racks and central processing nodes. Mixing legacy hardware revisions without checking bus loading can cause communication errors.
- Upgrade Considerations: When replacing older revisions, verify that terminal strip wiring designations match the exact pinout map of the 962.004.300 hardware variant.
Frequently Asked Questions (FAQ)
Why should I buy a New Surplus MXM402 instead of a cheaper used module from a decommissioned ship?
Used marine automation modules often suffer from hidden exposure to salt-air humidity, thermal stress, and internal component drift. Buying New Surplus guarantees zero operating hours, pristine internal circuitry, and absolute operational reliability for critical shipboard systems.
Is this unit an original factory-authentic part?
Yes. This product is a Brand New Surplus unit supplied in its original packaging, entirely uninstalled and free from prior marine operational exposure or component repairs.
What is the obsolescence status of the MXM402?
This module is officially obsolete and discontinued by the original manufacturer. Because active factory channels are closed, holding 1-2 new units on-site as strategic buffer stock is essential to avoid lengthy port delays and costly downtime.
Can I hot-swap this multiplexer module?
No. Standard marine automation backplanes and terminal connections do not support safe live insertion or extraction. You must completely power down the instrumentation rack before replacing the module.
Will my channel configurations and scaling parameters be retained?
Configuration and scaling parameters for analog inputs are typically stored in the central system controller or master node rather than the MXM402 itself. Once installed on the bus and recognized automatically, the module will process inputs according to system programming.
What warranty terms apply to this New Surplus module?
This unit includes a comprehensive 1-year replacement warranty, validating our commitment to uncompromised industrial and marine reliability.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626