Description
3. Key Technical Specifications
| Parameter | Value / Range |
|---|---|
| Engine Type | Four-stroke, in-line, medium-speed diesel |
| Bore × Stroke | 270 mm × 380 mm |
| Swept Volume per Cylinder | 21.76 dm³ |
| Number of Cylinders | 5, 6, 7, 8, 9 |
| Rated Speed | 720–900 rpm (typical) |
| Cylinder Output (MCR) | Approx. 300–410 kW/cyl depending on rating |
| Power Range | Approx. 1,500–3,690 kW |
| Mean Effective Pressure | Up to ~25.7 bar |
| Fuel Capability | HFO, MDO/MGO; Mk2 versions methanol-ready |
| Emissions | IMO Tier II; Tier III with SCR |
| Cooling | Freshwater cooled |
| Starting | Compressed air |
| Applications | Marine propulsion, marine GenSets, stationary power |
4. Product Introduction
The MAN B&W L27/38 is a medium-speed, four-stroke, in-line diesel engine widely used for marine propulsion and GenSet applications. With a 270 mm bore and 380 mm stroke, it delivers high torque, good load response, and the ability to burn heavy fuel oil.
Available in 5- to 9-cylinder configurations, the engine covers a power range of roughly 1,500 to 3,690 kW at speeds between 720 and 900 rpm. It is a proven workhorse on offshore vessels, tugs, AHTS vessels, and larger merchant ships, as well as in stationary power plants. The Mk2 version offers higher cylinder output and methanol-ready capability while retaining the reliability of the original design.
5. Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| Hard starting or no start | Low air pressure or fuel issues | ✅ High | Check starting air pressure and fuel supply | Verify air system and fuel quality/filters |
| High exhaust temperature | Injector, turbo, or combustion issue | ✅ High | Compare cylinder temperatures and turbo boost | Inspect injectors, turbo, and air filters |
| Low power / smoke | Fuel quality, air restriction, or timing | ✅ High | Check fuel viscosity, air filter DP, and timing | Correct fuel treatment and clean air path |
| Abnormal vibration | Bearing, alignment, or imbalance | ✅ Medium | Vibration analysis and visual inspection | Check foundation bolts, alignment, and bearings |
| High lube oil consumption | Piston rings, liner, or seals | ✅ High | Monitor oil level and analyze oil samples | Schedule inspection of pistons and liners |
| Cooling water temperature high | Cooler fouling or thermostat fault | ✅ Medium | Check cooler DP and thermostat operation | Clean coolers and verify freshwater system |
Always follow the official MAN B&W L27/38 instruction manual and safety procedures. Record operating data and diagnostic readings before major interventions.

L27/38

L27/38
6. Frequently Asked Questions (FAQ)
Q: What does L27/38 mean?
L = in-line configuration, 27 = 270 mm bore, 38 = 380 mm stroke.
Q: How many cylinders are available?
Standard configurations are 5L27/38 through 9L27/38.
Q: Can the L27/38 burn heavy fuel oil?
Yes. The engine is designed for HFO operation (viscosity up to 700 cSt depending on installation) as well as MDO/MGO. Mk2 versions support methanol readiness.
Q: What is the difference between propulsion and GenSet versions?
Propulsion versions are optimized for variable-speed operation and high torque; GenSet versions are optimized for constant-speed generator drive. Many components are common.
Q: Are genuine spare parts still available?
Yes. MAN Energy Solutions and authorized partners continue to supply genuine parts and support for the L27/38 series.
Q: What are typical overhaul intervals?
Long overhaul intervals are a design feature. Exact hours depend on operating profile, fuel quality, and maintenance practices. Refer to the official maintenance schedule for the specific engine rating.
When ordering parts or planning maintenance, always quote the exact engine type (e.g., 8L27/38), engine number, and product identification number to ensure correct supply.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626