Sale!

Motorola MVME61006E-0163R PowerPC G4 VME Processor Module

  • Model: MVME61006E-0163R
  • Brand: Motorola / Emerson (Artesyn Embedded Technologies)
  • Series: MVME6100 Series (2eSST VMEbus Architecture)
  • Core Function: High-performance VMEbus single-board computer for real-time control.
  • Product Type: VME Processor Module
  • Key Specs: 1.267 GHz MPC7457 PowerPC G4 | 512MB ECC DDR SDRAM | IEEE Handles
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Legacy / Obsolete EOL item requiring managed strategic buffer stocking.
Categories: , , , , SKU: MVME61006E-0163R Brand:

Description

Key Technical Specifications

Parameter Value
Microprocessor PowerPC G4 (MPC7457) with AltiVec engine at 1.267 GHz
Level 1 Cache 32 KB instruction cache / 32 KB data cache
Level 2 Cache 512 KB on-chip L2 cache
Level 3 Cache 2 MB L3 cache
System Memory (DDR) 512 MB on-board ECC DDR SDRAM (DDR266 / 133 MHz)
Flash Memory 128 MB on-board Flash memory (dual banks)
VMEbus Interface Tundra Universe II PCI-to-VME bridge (2eSST / 2eVME protocol)
Ethernet Interface Dual 10/100/1000 Mb/s (Gigabit) Ethernet ports
Mezzanine Expansion Two PMC/PMC-X expansion sites (64-bit / 100 MHz)
Front Panel Style IEEE P1101 ejector handles (RoHS compliant build code -R)
Non-Volatile Storage NVRAM with integrated time-of-day clock and battery backup
Power Requirements +3.3V, +5V, +12V, −12V DC backplane power rails

 

Product Introduction & Supply Chain Strategy

The Motorola MVME61006E-0163R is an enterprise-grade 6U VMEbus single-board computer powered by a 1.267 GHz MPC7457 PowerPC G4 processor, 512 MB of ECC DDR SDRAM, and dual Gigabit Ethernet ports. Engineered with 2eSST high-speed backplane protocols and IEEE front panel handles, it provides deterministic computational power and high bandwidth for mission-critical automation, defense systems, and industrial processing racks. Systems engineers rely on this controller to execute heavy data workloads without redesigning existing VME chassis infrastructure.

Securing this specific module configuration as a Brand New Surplus unit protects plant operations from the severe vulnerabilities of the open secondary market. Because the MVME6100 platform is officially discontinued by the manufacturer, unverified used parts in the supply chain frequently carry internal thermal degradation, micro-fractured solder, and worn backplane connector contacts. Deploying certified New Surplus hardware guarantees original factory longevity, prevents costly unplanned downtime, and lowers Total Cost of Ownership (TCO).

MVME61006E-0163R

MVME61006E-0163R

MVME61006E-0163R

MVME61006E-0163R

Installation & Configuration Guide

Stage 1: Pre-Installation (Prep & Safety)

  1. Execute plant Lock-Out/Tag-Out (LOTO) procedures for the targeted VME rack.
  2. Wear an ESD-safe grounded wrist strap before touching any electronic modules.
  3. Record all current front-panel wire routing and photograph onboard DIP switches, jumper positions, and PMC card installations.

Stage 2: Removal

  1. Unlock the IEEE front-panel ejector handles to disengage the board connectors from the VME backplane (P1 and P2).
  2. Pull the module smoothly along the card guide rails, ensuring no physical impact with adjacent cards.

Stage 3: Installation (Clone & Seat)

  1. Duplicate all onboard jumpers and configuration switches on the new MVME61006E-0163R to match your baseline notes exactly.
  2. Align the board edges carefully with the top and bottom card guides of the target slot.
  3. Slide the card firmly into the rack until the connectors seat completely, then latch the IEEE handles down to secure the module.

Stage 4: Power-On & Testing

  1. Re-energize the rack and observe the front-panel status LEDs during the boot self-test.
  2. Attach a serial terminal to the debug port to verify initial console diagnostics and memory test output.
  3. Load the operational system application image, verify network link handshakes, and confirm error-free communication across the VMEbus backplane.

 

Firmware/Software Versions & Upgrade Notes

  • Recommended Firmware: Pre-loaded MOTLoad or PPCBUG boot monitor firmware matching your system’s Board Support Package (BSP) revision.
  • Compatibility Warnings: Verify that your system software supports the 1.267 GHz clock frequency and the 512 MB memory mapping of the -0163R build. Mismatched operating system kernels can lead to VME bus errors or driver initialization failures.
  • Upgrade Risk Advisory: Never flash boot firmware during live plant operations. Always perform firmware updates and software validation on an isolated bench-test chassis before dropping the card into production.

 

Frequently Asked Questions (FAQ)

Why is this unit priced higher than refurbished alternatives found online?

Our pricing reflects the exact cost of sourcing genuine New Surplus inventory from verified global channels. While refurbished parts offer lower initial costs, they introduce significant downtime risks. Our inventory guarantees zero operational wear, original anti-static packaging, and complete peace of mind.

Is this unit an original factory-sealed part?

Yes. This product is a Brand New Surplus unit. It has never been installed in an active plant, never pulled from a decommissioned chassis, and never subjected to component repairs. It arrives in pristine factory condition with clean, un-worn backplane pins.

What is the obsolescence status of the MVME61006E-0163R?

This module is officially obsolete (EOL) and out of production. Because OEM production lines are permanently closed, keeping 1-2 units on-site as strategic buffer stock is vital to avoid extended plant outages when legacy cards fail.

Can I hot-swap this VME processor card?

No. Standard VMEbus architectures and physical backplane pins do not support live hot-swapping. You must completely power down the VME chassis before extracting or installing the module to avoid electrical damage.

Will my application software and parameters be retained on the card?

The card ships with standard diagnostic monitor firmware. Application code, operating system images, and IP configurations must be re-loaded following physical installation. Non-volatile parameters are saved in the on-board NVRAM.

What warranty terms apply to this New Surplus module?

This unit includes a comprehensive 1-year replacement warranty, demonstrating our commitment to industrial reliability and supply-chain transparency.