Description
Key Technical Specifications
| Parameter | Value |
| Manufacturer | National Instruments |
| Series | C Series I/O |
| Model Code | NI 9227 |
| Number of Channels | 4 simultaneous analog input channels |
| Input Current Range | 5 A RMS (supports up to 14 A peak) |
| Sampling Rate | 50 kS/s per channel maximum |
| ADC Resolution | 24 bits |
| Measurement Accuracy | ±0.03% of reading (typical) |
| Isolation Voltage | 250 Vrms Ch-to-Earth ground continuous |
| Operating Temperature | −40 to 70°C |
Product Introduction & Supply Chain Strategy
The National Instruments NI 9227 is a 4-channel, 5 A RMS current input module designed for CompactDAQ and CompactRIO chassis, engineered for high-accuracy power measurement, current monitoring, and dynamic signal analysis. It utilizes simultaneous sampling across all channels to maintain phase relationship integrity in electrical test systems.
Procuring this acquisition module as New Surplus ensures measurement fidelity while safeguarding Total Cost of Ownership (TCO). Relying on second-hand test hardware introduces severe risks of degraded channel linearity and drifted ADC calibration tolerances. Stocking verified surplus modules eliminates testing downtime, avoiding costly project delays while bypassing extended OEM manufacturing lead times.
Installation & Configuration Guide
1.Pre-Installation (Prep & Safety):Estimated time: 5 mins.
Power down the CompactDAQ or CompactRIO chassis to prevent backplane surge damage. Put on a grounded ESD wrist strap, verify zero energy state on external sensor wiring, and inspect the module connector pins for cleanliness.
2.Removal:Estimated time: 5 mins.
Press the module release latches located on the top and bottom housing. Pull the legacy NI 9227 module straight out from the chassis slot smoothly to avoid bending backplane pins.
3.Installation (Clone & Seat):Estimated time: 5 mins.
Align the replacement NI 9227 module with the chassis slot and press firmly until the locking mechanisms click securely into place. Reconnect the front spring-terminal or screw-terminal connector block tightly.
4.Power-On & Testing:Estimated time: 10 mins.
Energize the system chassis and check that the module status LED indicates normal operation. Open NI Measurement & Automation Explorer (MAX) or your application environment to verify channel communication and confirm stable signal baselines.

9227
Firmware/Software Versions & Upgrade Notes
- Recommended Version: Ensure your installed version of NI-DAQmx matches or supports the firmware baseline required for the NI 9227 module within your target chassis controller.
- Compatibility Notes: The NI 9227 is natively supported across standard CompactDAQ and CompactRIO platforms running compatible NI-DAQmx driver suites.
- Risk Management: Avoid performing driver updates during active test cycles. Swapping matched hardware within a stable software ecosystem maintains system calibration integrity and prevents unexpected configuration errors.
Frequently Asked Questions (FAQ)
Is this module genuinely new or refurbished?
This product is a Brand New Surplus unit. It features original OEM packaging, zero wear on connector pins, and has never been installed in an active test bench or industrial facility. We strictly reject second-hand, salvaged, or refurbished components.
Why choose New Surplus for measurement modules?
Precision instrumentation modules rely heavily on tight component tolerances. Refurbished or used surplus modules often suffer from thermal stress or degraded calibration accuracy over time. Buying New Surplus guarantees factory-level measurement precision and reliability.
Does replacing this module require recalibration of the chassis?
While the module contains its own onboard calibration data stored in EEPROM, verifying sensor scaling within your software environment after installation ensures complete measurement accuracy.
What warranty is included with this unit?
Every unit is backed by a comprehensive 1-year replacement warranty, validating our strict inbound quality control and electrical verification standards.
Can I hot-swap the NI 9227 module?
CompactDAQ and CompactRIO systems support module hot-swapping under specific system configurations, but best engineering practices recommend powering down the chassis to prevent transient spikes on sensitive current inputs.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626