Sale!

NI SCXI-1001 High-Channel-Count SCXI Chassis

The National Instruments SCXI-1001 is a 12-slot AC-powered chassis designed for the SCXI family of signal conditioning modules. It supplies power to installed modules and manages timing, triggering, and analog/digital signal routing between SCXI modules and a connected multifunction DAQ device.

Categories: , , , , SKU: SCXI-1001 Brand:

Description

Core Product Summary

The National Instruments SCXI-1001 is a 12-slot AC-powered chassis designed for the SCXI family of signal conditioning modules. It supplies power to installed modules and manages timing, triggering, and analog/digital signal routing between SCXI modules and a connected multifunction DAQ device.

Up to eight SCXI-1001 chassis can be daisy-chained to a single DAQ device, supporting high-channel-count systems. The chassis provides a low-noise environment suitable for precision analog measurements. Multiple AC power variants were offered to match regional line voltages. The product is obsolete and no longer available from NI; PXI-based chassis are the recommended modern replacements.

 

Key Technical Specifications

Parameter Value
Product Type 12-slot SCXI chassis
Manufacturer National Instruments (NI)
Slots 12
Power Input AC (100 / 120 / 220 / 240 VAC, 47–63 Hz) — region-specific variants
Maximum Operating Current (approx.) 1.75 A at 100 VAC; 1.25–1.5 A at 120 VAC; 0.75–0.80 A at 220/240 VAC
Module Power per Slot +5 VDC @ 50 mA; +18.5 to +25 VDC @ 170 mA; –18.5 to –25 VDC @ 170 mA
Daisy-Chain Capability Up to 8 chassis with one multifunction DAQ device
Scan Rate Support Up to 333 kS/s across modules (system dependent)
Dimensions (approx.) 9.8 × 17.3 × 7.0 in (24.8 × 43.9 × 17.7 cm)
Weight 6.8 kg (14 lb 14 oz)
Operating Temperature 0 to 50 °C
Storage Temperature –20 to 70 °C

 

Detailed Product Overview

The SCXI-1001 forms the mechanical and electrical foundation of an SCXI measurement system. SCXI modules plug into the front of the chassis and receive regulated power and control signals from the backplane. The chassis contains the circuitry needed to synchronize modules with an external DAQ device and to route analog signals onto the SCXI analog buses.

Because a single DAQ device can address multiple chassis, the architecture scales efficiently for applications requiring hundreds or thousands of conditioned channels (thermocouples, strain gauges, RTDs, voltage inputs, etc.). Address switches on the chassis set the chassis ID for multi-chassis systems.

Regional power-entry variants differ only in the AC input configuration and fuse ratings; the core backplane and module power supplies remain the same. The chassis includes cooling fans and is designed for benchtop or rack-mount use (rack ears available as accessories).

SCXI-1001

SCXI-1001

SCXI-1001

SCXI-1001

Dimensions, Mounting & Connection Notes

Overall dimensions are approximately 9.8 in deep × 17.3 in wide × 7.0 in high. Weight is 6.8 kg. The chassis is intended for horizontal benchtop placement or 19-inch rack mounting with optional rack-mount ears. Front-panel module slots accept SCXI modules; rear-panel connectors provide the interface to the DAQ device and, when used, the daisy-chain cable to additional chassis. Cooling fans must remain unobstructed. Chassis address is set via rear-panel switches or jumpers.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Modules SCXI series signal conditioning modules Must be SCXI form-factor modules
DAQ Interface Multifunction DAQ device (E Series, M Series, etc.) via cable/adapter Required for data acquisition and control
Multi-Chassis Up to 8 SCXI-1001 (or mixed SCXI chassis) daisy-chained Single DAQ device controls the chain
Software NI-DAQmx (or legacy NI-DAQ) Driver handles chassis addressing and scanning
Power Region-specific AC line voltage Select correct part number / fuse for local voltage
Mounting Benchtop or rack (with optional ears) Ensure adequate ventilation for fans
Status Obsolete No longer sold by NI; PXI Express chassis recommended for new systems

 

FAQ

What is the NI SCXI-1001?
It is a 12-slot AC-powered chassis that holds and powers SCXI signal conditioning modules and manages timing and signal routing to a DAQ device.

How many modules does it hold?
12 SCXI modules.

Can multiple chassis be used together?
Yes. Up to eight SCXI-1001 chassis can be daisy-chained to a single multifunction DAQ device.

What power options were available?
Region-specific AC variants for 100 V, 120 V, 220 V, and 240 V line voltages (50/60 Hz).

Is the SCXI-1001 still available from NI?
No. It is obsolete. NI recommends migration to PXI Express chassis for new designs.

What software is required?
NI-DAQmx (or the older NI-DAQ driver) running on a compatible host computer with a supported DAQ device.