Sale!

Pacific Scientific PC834-001-N 7.1A Brushless Servo Drive

  • Model: PC834-001-N
  • Brand: Pacific Scientific (Kollmorgen)
  • Series: PC800 Series
  • Core Function: High-performance digital brushless servo motor control
  • Product Type: Digital Brushless Servo Drive
  • Key Specs: 7.1 A RMS Continuous Current | 21.2 A RMS Peak Current | SERCOS Network Interface
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Legacy motion control asset requiring strategic surplus stocking to prevent multi-axis axis line shutdowns.
Categories: , , , , SKU: PC834-001-N Brand:

Description

Key Technical Specifications

Parameter Value
Continuous Output Current 7.1 A RMS (at 25–40 °C)
Peak Output Current 21.2 A RMS
Command Interface SERCOS Network
Input Power Supply 180–265 VAC, 3-phase, 47–440 Hz
Control Power Input 85–265 VAC
Current Loop Bandwidth Up to 1.5 kHz
Velocity Loop Bandwidth > 400 Hz
Resolver Resolution 24-bit position resolution
Power Stage Efficiency 98% (IGBT power stage)
Dimensions (H x W x D) 198.1 x 114 x 158 mm
Weight 2.6 kg

 

Product Introduction & Supply Chain Strategy

The Pacific Scientific PC834-001-N is an all-digital brushless servo drive engineered for precise torque, velocity, and multi-axis position control in demanding industrial machinery. It manages high-speed commutation and feedback loop processing via a high-bandwidth digital signal processor architecture.

Securing this mature drive as a certified New Surplus asset establishes a vital buffer stock defense against sudden obsolescence halts. Sourcing genuine OEM surplus eliminates the hidden failure risks of refurbished power electronics, preserving Total Cost of Ownership (TCO) and avoiding unplanned production losses.

PC834-001-N

PC834-001-N

PC834-001-N

PC834-001-N

PC834-001-N

PC834-001-N

Installation & Configuration Guide

1.Pre-Installation (Prep & Safety):Prerequisite.

Isolate main three-phase power and control feeds to the drive enclosure, executing strict lock-out/tag-out (LOTO) protocols. Wear an ESD-safe grounding wrist strap. Use a multimeter to confirm complete DC bus capacitor discharge before touching wiring terminals.

Verification: Verify zero voltage across drive power terminals L1, L2, L3 and check that internal bus status indicators are unlit.

2.Removal:Mechanical Extraction.

Disconnect pluggable signal connectors, resolver feedback cables, and heavy power terminal blocks. Loosen panel mounting screws and extract the legacy servo drive straight out of the control chassis.

Verification: Inspect the back panel mounting plate for debris, dust accumulation, or thermal pad wear before placing the new unit.

3.Installation (Clone & Seat):Hardware Setup.

Mount the Pacific Scientific PC834-001-N drive securely to the panel backplate, ensuring proper clearance for convection cooling. Transfer parameter configurations via software or check node address switch settings to match the legacy setup. Reconnect all power, resolver, and network interfaces.

Verification: Perform a mechanical tug test on each terminal screw connection to ensure tight, reliable electrical contact.

4.Power-On & Testing:Commissioning.

Restore control power first and verify initialization through network diagnostic indicators. Apply main three-phase power and execute a low-speed axis jog command to check motor alignment and resolver feedback tracking.

Verification: Confirm that the drive display reports normal operational status without over-current, phase loss, or communication fault codes.

 

Firmware/Software Versions & Upgrade Notes

  • Parameter Baseline: Ensure your drive configuration file matches the exact firmware revision level associated with your SERCOS network master controller.
  • Compatibility Warnings: Do not swap drive models across different hardware generation series without verifying firmware compatibility, as control loop tuning parameters and communication mapping can shift.
  • Configuration Backup: Always upload and save a complete backup parameter file from the old drive unit using the configuration software utility before disconnecting hardware.

 

Frequently Asked Questions (FAQ)

  • Why is this Pacific Scientific drive classified as New Surplus rather than factory direct?

    This unit is an authentic, original OEM-manufactured servo drive procured from verified surplus inventories following plant modernization projects. It has never been installed in a live machine or subjected to operational motor loads.

  • How can I verify this drive is not refurbished or repaired?

    We enforce a strict zero-tolerance policy against second-hand, repaired, or rebuilt electronics. Every unit arrives in original packaging featuring unblemished heat sinks, clean power screw terminals, and pristine internal component boards.

  • What are the hidden dangers of installing a refurbished servo drive?

    Refurbished drives often feature heat-stressed IGBT power modules, dried-out electrolytic DC bus capacitors, and fatigued solder joints. These hidden flaws lead to sudden thermal trips, unexpected axis shutdowns, and costly line stoppages.

  • Is the PC834-001-N affected by manufacturer obsolescence?

    Yes, this legacy hardware platform is discontinued by the OEM, making verified New Surplus inventory scarce and critical for maintaining un-migrated automation lines.

  • What warranty terms apply to this New Surplus servo drive?

    This product is backed by a comprehensive 1-year replacement warranty, matching standard OEM reliability benchmarks and protecting your capital investment.