Sale!

Reliance Electric W/R-67100-A 250 W DCS Rack Power Supply

Parameter Value
Manufacturer Reliance Electric
Model / order number W/R-67100-A (also written WR-67100-A)
Product type Power supply module
Series W/R-67100 (variants: W/R-67100, W/R-67100-A, W/R-67100-B)
Rated output power 250 W
System family Reliance DCS control system
Companion modules in the same system S-67100 processor; S-67101 network communication module; S-series I/O module
Categories: , , , , SKU: W/R-67100-A Brand:

Description

Core Product Summary

The Reliance Electric W/R-67100-A is a power supply module belonging to the W/R-67100 series for the Reliance DCS control system family. It is identified as a 250 W power supply that serves the DCS racks in which the S-series processor, network communication, and I/O modules operate.

Within a Reliance DCS installation, this power supply sits in the same equipment grouping as modules such as the S-67100 processor, the S-67101 network communication module, and the S-series digital and analog I/O modules. The W/R-67100 series was produced in more than one hardware variant — the base W/R-67100, the W/R-67100-A, and the W/R-67100-B — so the suffix on the module label is the key identification point when matching a unit to an existing rack. Engineers sourcing a replacement or spare should confirm the exact suffix marked on the installed unit before ordering.

 

Key Technical Specifications

Parameter Value
Manufacturer Reliance Electric
Model / order number W/R-67100-A (also written WR-67100-A)
Product type Power supply module
Series W/R-67100 (variants: W/R-67100, W/R-67100-A, W/R-67100-B)
Rated output power 250 W
System family Reliance DCS control system
Companion modules in the same system S-67100 processor; S-67101 network communication module; S-series I/O modules

Detailed electrical input/output values, environmental limits, and physical dimensions for the exact model were not available from confirmable manufacturer documentation and are therefore not listed.

 

Engineering Selection Highlights

  • Exact-suffix identification. The W/R-67100 series exists in at least three marked variants (base, -A, -B). Because the suffix is part of the orderable identity, engineers and buyers should match the suffix on the failed or populated unit rather than treating all variants as interchangeable.
  • 250 W rating. The rated output defines how much of the rack load the module can carry. When sizing a replacement, confirm the combined power demand of the processor, communication, and I/O modules in the target rack stays within this rating.
  • System scope. The module belongs to the Reliance DCS family — the same equipment family as the S-67100 processor and S-67101 network communication module. It is not part of the AutoMax, AutoMate, or later Reliance drive product lines, despite similar naming conventions in some catalogs.
  • Rack-level role. As a rack power supply, its failure typically takes down an entire DCS rack rather than a single I/O point, which is why the W/R-67100 series is commonly stocked as a critical spare in systems that still run this hardware.
  • Verification point for legacy systems. Documentation for this product family is sparse in current manufacturer libraries, so the module label and the hardware configuration of the receiving rack are the most reliable sources when confirming fit.
W/R-67100-A

W/R-67100-A

W/R-67100-A

W/R-67100-A

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
System family Reliance DCS control system Serves the racks of the DCS family that use S-series modules
Companion processor S-67100 processor (including S-67100-1 / S-67100-2 variants) Processor modules identified within the same system grouping
Companion communication module S-67101 network communication module Listed as the DCS network communication module
Companion I/O modules S-67103 (100 V AC/DC input), S-67105 (100–220 V AC high output), S-67106 (5–24 V DC output), S-67107 (5–24 V DC input), S-67108 (pulse tach input), S-67118 (analog output) These S-series I/O modules operate in the same DCS racks the power supply feeds
Variant suffix W/R-67100 base, -A, and -B variants exist Match the suffix of the unit being replaced; cross-variant interchangeability is not documented

 

Detailed Product Overview

The Reliance Electric W/R-67100-A is best understood as the power backbone of a Reliance DCS rack. In systems of this generation, processor and I/O functions are distributed across dedicated plug-in modules, and each module depends on a common power supply within the rack. The W/R-67100 series carries a 250 W rating, which sets the ceiling on the combined module load a single rack can present.

For selection and replacement work, the most important detail is that this is a variant within a numbered series. The base W/R-67100, the -A, and the -B suffixes appear as distinct part identities in module listings and surplus catalogs, and Reliance used suffix letters across its product lines to mark hardware revisions. Since no official interchangeability statement between the suffixes is available, the defensible engineering practice is to replace like with like: read the suffix from the label of the unit being removed and source the identical order number.

The second decision point is load verification. Because the supply feeds the entire rack, its 250 W rating must be checked against the actual module complement — a processor, a network communication module, and the installed I/O cards — rather than assumed sufficient. When a rack has been expanded since it was first commissioned, the original power supply selection may no longer reflect the present load.

The module’s role also explains its maintenance relevance. A degraded or failed rack supply usually announces itself as a whole-rack outage or erratic behavior across multiple modules at once, which makes the W/R-67100 series a natural candidate for spare stocking in facilities that continue to operate Reliance DCS hardware. Buyers procuring units from the secondary market should note that condition claims (used, tested, refurbished) are seller-specific statements, not properties of the part number itself, and should be evaluated per offering.

Published manufacturer documentation with exact input/output voltages, connector details, and dimensional data for this model is not widely accessible, so the module label and the physical rack configuration remain the authoritative references for integration work.

 

Applications & System Role

The W/R-67100-A occupies the power-distribution position in a Reliance DCS rack. Its engineering function is to convert the incoming supply into the internal operating power that the rack’s processor, network communication, and I/O modules depend on. In this architecture it is a shared-resource component: every S-series module in the rack draws from the power budget it provides, so its condition directly affects the availability of the whole rack rather than a single loop or channel.

Within the DCS family, the processor module handles control execution, the S-67101 module handles network-level communication, and the S-series I/O modules interface with field signals such as 100 V AC/DC inputs, 5–24 V DC inputs and outputs, high-current AC outputs, pulse tachometer inputs, and analog outputs. The power supply is the enabling component that keeps this grouping operational.

Typical technical-fit scenarios are maintenance of existing Reliance DCS installations and spare-parts provisioning for racks that still run this hardware generation. No specific industry deployments can be attributed to this exact model from available documentation.

 

FAQ

What is the Reliance W/R-67100-A?
It is a 250 W power supply module in the W/R-67100 series, built for the Reliance Electric DCS control system family.

Which system does it belong to?
It belongs to the Reliance DCS product family — the same system that uses S-series modules such as the S-67100 processor, the S-67101 network communication module, and S-series digital and analog I/O modules.

What does it do in the system?
It provides the operating power for a DCS rack, feeding the processor, communication, and I/O modules installed in that rack.

What is the difference between W/R-67100, W/R-67100-A, and W/R-67100-B?
They are distinct variants within the same W/R-67100 power supply series, identified by their suffix. No official interchangeability statement between them is available, so the suffix on the module label should be matched exactly when replacing a unit.

What is its power rating?
The W/R-67100 series power supply is identified as a 250 W unit.

Which modules does it power in a DCS rack?
Documented companion modules in the same system include the S-67100 processor, the S-67101 network communication module, and S-series I/O modules including 100 V AC/DC input, 5–24 V DC input and output, 100–220 V AC high output, pulse tachometer input, and analog output modules.

Why is this part commonly sourced as a spare?
Because it powers the entire rack, its failure affects all modules in that rack, which makes it a common critical spare for facilities that still operate Reliance DCS hardware.