Description
Key Technical Specifications
| Parameter | Value |
| Motor Series | MKD (Synchronous Servo Motor) |
| Size | 090 |
| Length | B |
| Winding Code | 047 |
| Encoder Type | Singleturn absolute encoder |
| Shaft Design | Plain shaft (with shaft sealing ring) |
| Holding Brake | With holding brake (24 V DC) |
| Cooling Type | Natural convection / surface cooling |
| Protection Class | IP65 |
| Insulation Class | Class F according to IEC 60034-1 |
Product Introduction & Supply Chain Strategy
The Bosch Rexroth MKD090B-047-GG0-KN is an industrial AC permanent magnet synchronous servo motor designed for high-torque applications in heavy machinery, printing presses, and automated material handling systems. It features a singleturn feedback encoder and integrated holding brake for closed-loop motion architectures.
Securing this unit as a Brand New Surplus asset protects your plant against extended downtime and obsolete part scarcity. Sourcing genuine, factory-fresh hardware eliminates the hidden failure risks of repaired motors, ensuring predictable Total Cost of Ownership (TCO) and a 10–15 year operational lifespan across critical production lines.

MKD090B-047-GG0-KN

MKD090B-047-GG0-KN
Installation & Configuration Guide
- Stage 1: Pre-Installation (Prep & Safety): Execute lock-out/tag-out (LOTO) procedures on the drive controller and associated 3-phase power bus. Equip an ESD grounding strap. Inspect the new motor shaft and mounting flange for preservation residues and clean using approved solvents.
- Stage 2: Removal: Disconnect power cables, feedback connectors, and brake lines from the legacy motor. Support the motor weight securely before unbolting the flange to prevent mechanical binding or damage to alignment pins.
- Stage 3: Installation (Clone & Seat): Align the MKD090B-047-GG0-KN precisely with the gearbox or mechanical load interface. Torque mounting bolts evenly in a cross-pattern to manufacturer specifications. Connect feedback, power, and holding brake lines, verifying secure shielding and strain relief.
- Stage 4: Power-On & Testing: Verify insulation resistance across power phases prior to energizing. Power up the drive controller at a low override speed, check encoder communication handshakes, verify 24 V DC brake release operation, monitor motor temperature and vibration feedback, and validate homing routines.
Firmware/Software Versions & Upgrade Notes
- Recommended Version: Match the associated Rexroth drive firmware (e.g., IndraDrive C or D series firmware) to current operational baselines established for the MKD motor family.
- Compatibility Notes: Verify motor data memory parameters within the drive firmware upon replacement. Ensure correct pole-pair mapping, thermal sensor configuration, and singleturn encoder alignment values.
- Upgrade Warning: Avoid arbitrary firmware downgrades or upgrades during a hardware swap unless resolving a documented drive-motor commutation anomaly. Always back up existing parameter sets via IndraWorks before connecting a replacement motor.
Frequently Asked Questions (FAQ)
- Are these motors truly new or refurbished? This unit is a Brand New Surplus part. It is factory-original, housed in original anti-static packaging, and has never been installed, used, or repaired.
- Why choose New Surplus over a cheaper refurbished unit? Refurbished motors often suffer from degraded winding insulation, worn bearings, and fatigued feedback devices. Saving capital on a used part introduces catastrophic risk; a single unplanned production line failure can cost 10x the motor purchase price in downtime.
- What is the inventory strategy for this part number? Because mature servo motors face intermittent component lead time extensions, maintaining 1 unit of buffer stock on-site acts as an essential insurance policy for high-utilization automation cells.
- Does this unit include a holding brake? The “-KN” designation indicates this specific configuration is supplied with an integrated holding brake, suitable for maintaining position on vertical or suspended loads when power is removed.
- What warranty terms are included? Every New Surplus MKD090B-047-GG0-KN unit is backed by a comprehensive 1-to-2 year operational warranty, matching OEM support standards.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626