Sale!

Rexroth MSK040C-0600-NN-M1-UG0-NNNN Synchronous Servo Motor

  • Model: MSK040C-0600-NN-M1-UG0-NNNN
  • Brand: Bosch Rexroth (Indramat)
  • Series: MSK Synchronous Servo Motor Series
  • Core Function: High-dynamic industrial motion control and precision positioning
  • Product Type: AC Permanent Magnet Synchronous Motor
  • Key Specs: Frame Size 040 | Length C | Optical Encoder | Plain Shaft Without Holding Brake
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Active/Mature lifecycle status; essential buffer stock item required to prevent unplanned downtime on high-speed automation machinery.
Categories: , , , , SKU: MSK040C-0600-NN-M1-UG0-NNNN Brand:

Description

Key Technical Specifications

Parameter Value
Motor Series MSK (Synchronous Servo Motor)
Size 040
Length C
Winding Code 0600
Cooling Type Natural convection
Encoder Type Multi-turn absolute optical encoder (Hiperface)
Shaft Design Plain shaft with shaft sealing ring
Holding Brake Without holding brake (-NN-NNNN variant)
Protection Class IP65
Insulation Class Class F according to IEC 60034-1

 

Product Introduction & Supply Chain Strategy

The Bosch Rexroth MSK040C-0600-NN-M1-UG0-NNNN is an advanced industrial AC permanent magnet synchronous servo motor designed for high-precision factory automation, packaging lines, and multi-axis robotics. It delivers exceptional torque density and smooth low-speed performance within closed-loop digital drive architectures.

Securing this unit as a Brand New Surplus asset protects your plant against extended downtime and obsolete part scarcity. Sourcing genuine, factory-fresh hardware eliminates the hidden failure risks of repaired motors, ensuring predictable Total Cost of Ownership (TCO) and a 10–15 year operational lifespan across critical production lines.

 

Installation & Configuration Guide

  • Stage 1: Pre-Installation (Prep & Safety): Execute lock-out/tag-out (LOTO) procedures on the drive controller and associated 3-phase power bus. Equip an ESD grounding strap. Inspect the new motor shaft and mounting flange for preservation residues and clean using approved solvents.
  • Stage 2: Removal: Disconnect power cables and feedback connectors from the legacy motor. Support the motor weight securely before unbolting the flange to prevent mechanical binding or damage to alignment pins.
  • Stage 3: Installation (Clone & Seat): Align the MSK040C-0600-NN-M1-UG0-NNNN precisely with the gearbox or mechanical load interface. Torque mounting bolts evenly in a cross-pattern to manufacturer specifications. Connect feedback and power lines, verifying secure shielding and strain relief.
  • Stage 4: Power-On & Testing: Verify insulation resistance across power phases prior to energizing. Power up the drive controller at a low override speed, check encoder communication handshakes, monitor motor temperature and vibration feedback, and validate homing routines.
MSK040C-0600-NN-M1-UG0-NNNN

MSK040C-0600-NN-M1-UG0-NNNN

MSK040C-0600-NN-M1-UG0-NNNN

MSK040C-0600-NN-M1-UG0-NNNN

Firmware/Software Versions & Upgrade Notes

  • Recommended Baseline: Match the associated Rexroth drive firmware (e.g., IndraDrive C or Cs series firmware) to current operational baselines established for the MSK motor family.
  • Compatibility Notes: Verify electronic motor data memory (EnDat/Hiperface feedback protocols) parameters within the drive firmware upon replacement. Ensure correct pole-pair mapping and thermal sensor configuration.
  • Upgrade Warning: Avoid arbitrary firmware downgrades or upgrades during a hardware swap unless resolving a documented drive-motor commutation anomaly. Always back up existing parameter sets via IndraWorks before connecting a replacement motor.

 

Frequently Asked Questions (FAQ)

  • Are these motors truly new or refurbished?

    This unit is a Brand New Surplus part. It is factory-original, housed in original anti-static packaging, and has never been installed, used, or repaired.

  • Why choose New Surplus over a cheaper refurbished unit?

    Refurbished motors often suffer from degraded winding insulation, worn bearings, and fatigued feedback devices. Saving capital on a used part introduces catastrophic risk; a single unplanned production line failure can cost 10x the motor purchase price in downtime.

  • What is the inventory strategy for this part number?

    Because servo motors face intermittent component lead time extensions, maintaining 1 unit of buffer stock on-site acts as an essential insurance policy for high-utilization automation cells.

  • Does this unit include a holding brake?

    The specific nomenclature variant indicates this unit is supplied without an integrated holding brake (-NN-NNNN). Verify vertical axis load requirements before installation.

  • What warranty terms are included?

    Every New Surplus MSK040C-0600-NN-M1-UG0-NNNN unit is backed by a comprehensive 1-to-2 year operational warranty, matching OEM support standards.