WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Key Technical Specifications
- Manufacturer: SAM Electronics
- Series: HS06-TCU
- Model: NG3028G201TCU
- Product Type: Radar processor board
- Application: Marine radar system
- Condition: New surplus
- Availability: Limited stock
- Inventory Note: Purchased in 2004, never used
- Identification: Exact board number match required
- Compatibility Note: Verify against the installed radar platform before ordering
Product Introduction
SAM Electronics NG3028G201TCU is a marine radar processor board in the HS06-TCU line. It is listed as new surplus, purchased in 2004, and never used.
This is an exact-match part, so the board number matters more than the case shape or connector style. Confirm the installed radar platform and the old board label before buying.
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to This Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| Radar will not start | Missing supply voltage, fuse failure, or upstream power issue | ❌ Low | Measure input voltage at the rack and check fuses | Check power side first before replacing the board |
| No radar processing | Processor board failure or incompatible board revision | ✅ High | Compare the installed board number to NG3028G201TCU | Replace only after confirming exact part match |
| Intermittent display faults | Loose connector, oxidation, or grounding issue | ✅ High | Reseat connectors and inspect pins for damage | Clean contacts and verify installation |
| Wrong radar behavior | Configuration mismatch or platform incompatibility | ✅ High | Check system settings and compare with the removed board | Match the original setup before commissioning |
| Board overheats | Poor ventilation, load issue, or rack fault | ⚠️ Medium | Measure rack temperature and inspect airflow | Verify enclosure conditions before replacement |
If you are stuck, send photos of the board label, connectors, and fault logs to technical support.
- NG3028G201TCU
- NG3028G201TCU
Frequently Asked Questions
Q: Is NG3028G201TCU a SAM Electronics part?
A: Yes. The part number matches a SAM Electronics HS06-TCU radar processor board.
Q: Is this new or used?
A: The available listing says new surplus and notes that it was purchased in 2004 and never used. That usually means old stock, not factory fresh production.
Q: Can I use it as a direct replacement?
A: Only if the installed board number and radar platform match. With marine radar boards, exact part matching is the safe path.
Q: Does it need programming after installation?
A: Possibly, depending on the radar system configuration. Save the original settings before removal so you are not guessing during the swap.
Q: Is it hot-swappable?
A: Do not assume that. Power down the system unless the OEM documentation explicitly allows live replacement.
Q: Why is it cheaper than current OEM stock?
A: Because new surplus stock is older inventory that was never used. The price usually reflects age and availability, not necessarily a performance penalty.
Q: What should I confirm before ordering?
A: Check the exact board number, series, radar platform, connector layout, and condition. Those are the details that prevent the most common buying mistakes.
