Description
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sanyo Denki |
| Model Number | P30B06010DXS8SM |
| Series | BL SUPER P3 (square-cylinder) |
| Motor Type | AC servomotor (brushless) |
| Rated Output | 100 W (0.1 kW) |
| Supply Voltage | 200 V AC |
| Rated Current | Approx. 1.0 A |
| Rated Speed | 3,000 r/min |
| Encoder | Wiring-saving incremental, 2,000 P/R |
| Brake | No brake |
| Frame Size | 60 mm square-cylinder |
| Flange / Shaft | Standard flange mount; 8 mm shaft |
| Special Options | Oil seal (S), connector termination (M) |
| Weight | Approx. 780 g |
| Typical Application | Semiconductor wafer handling, CNC, robotics, Applied Materials tools |
| Cross-Reference | AMAT 0190-14827 |
Product Introduction
The Sanyo Denki P30B06010DXS8SM is a 100 W AC servo motor from the BL SUPER P3 series in a 60 mm square-cylinder frame. It runs on 200 V AC at roughly 1 A, turns 3,000 r/min, and reports position through a wiring-saving 2,000 P/R incremental encoder that reduces cable runs on multi-axis machinery. The 60 mm frame gives it more torque headroom than the 40 mm class at the same wattage, which is why it lands on heavier handling axes — including Applied Materials semiconductor tools under cross-reference 0190-14827.
The oil seal option matters more than people think: in fab and food-adjacent environments, the shaft seal is what keeps process fluids and condensation out of the bearing set, and unsealed motors die early there. This is a no-brake unit — if your axis needs holding torque at power-off, this is not your part. The BL SUPER P3 generation is discontinued, so matching the exact nameplate string and amplifier pairing is the whole game. Send us the full part string from your motor plate and the tool model before ordering, and we’ll confirm the variant.
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| Drive trips overcurrent at power-up | Winding short or phase-to-ground fault | ✅ High | Measure phase-to-phase winding resistance (should be balanced); Megger at 500 V to frame, >10 MΩ | Motor needs replacement or rewind |
| Encoder alarm, position loss | Encoder failure or damaged cable | ✅ High | Wiggle-test the encoder connector and cable; swap in a known-good cable before condemning the motor | Replace the cable first — it’s cheaper |
| Motor runs but overheats | Bearing wear or overloaded axis | ✅ High | Hand-rotate the shaft (power off) for grinding or drag; measure running current against the 1.0 A nameplate | Bearing service or replacement |
| Low torque, rough running | Phase sequence mismatch after rewiring | ❌ Low | Verify U/V/W phase wiring against the amplifier manual | Correct the wiring — motor is fine |
| Motor won’t turn, no fault | Mechanical jam downstream / amplifier fault | ❌ Low | Disconnect the coupling and rotate the motor shaft alone; if it spins free, the load is the problem | Fix the mechanism, not the motor |
| Oil residue at shaft / connector | Oil seal wear or external leak from the tool | ✅ High | Inspect the shaft seal lip and surrounding area; check for chemical mist sources nearby | Replace seal or motor; fix the leak source |
Straight talk: these motors are built like tanks, and most “failures” we see are encoder cables, contamination past a worn seal, or amplifier faults — not the windings. Isolate the fault before ordering: if the problem follows the motor when you swap it with a known-good axis, the motor is your culprit. If you’re still stuck, contact technical support with the drive alarm code, winding resistance readings, and nameplate photos — we’ll confirm before you spend.

P30B06010DXS8SM

P30B06010DXS8SM
Frequently Asked Questions
Q1: Is this interchangeable with the P30B04010DXS8FM?
No. Both are BL SUPER P3, 100 W, 200 V AC, with the same 2,000 P/R encoder — but the 04010 is a 40 mm (30 mm flange) frame and the 06010 is a 60 mm frame. Different bolt pattern, different torque constant, different mounting mechanics. They’re not drop-in swaps, and forcing the wrong frame into your mount will eat a maintenance window for nothing. Match the nameplate string exactly. If your plate reads P30B06010DXS8SM, this is your part; if it reads P30B04010DXS8FM, that’s the other listing.
Q2: Can I hot-swap this motor on a running tool?
Kill the power first — always. This isn’t a hot-swap component. De-energize the axis, lock out the amplifier, then disconnect. Two things to do before removal: photograph every connector and the coupling orientation, and mark the motor-to-mount relationship. On AMAT tools these motors often sit behind other hardware, and reassembly from memory at 2 AM is how parts get cross-threaded. Twenty seconds of photos saves two hours of rework. Seriously.
Q3: What condition is this unit in, and why is it cheaper than the OEM channel?
The BL SUPER P3 line is discontinued, so stock is Refurbished (tested) or New Surplus when we can source it. Every unit runs our bench sequence before it ships: visual inspection for shaft and seal condition, balanced phase-to-phase winding resistance check with a calibrated meter, 500 V Megger insulation test (>10 MΩ to frame), bearing evaluation by hand-rotation and play measurement, encoder verification against a matching driver across the full 2,000 P/R, a supervised run at rated speed, and a thermal soak. Results are documented per unit — test reports and photos are available before you pay. It’s cheaper because we source through surplus and refurbishment channels and test in-house; the hardware is genuine Sanyo Denki.
Q4: What warranty do you offer?
A 1-year replacement warranty covering functional failure under normal operating conditions. Not covered: chemical or liquid ingress beyond what the oil seal should handle when the seal is intact (in other words, if process fluids flooded the motor because a tool leak was ignored, that’s not a warranty case), physical damage from axis crashes, and damage from a faulty amplifier feeding the motor. If a covered unit fails, we replace it from stock — no repair-queue wait.
Q5: Can I substitute a newer SANMOTION motor instead?
Honestly, it’s a hassle and usually the wrong call for a repair. Later SANMOTION generations use different encoder protocols, different connectors, and different amplifier families. A “simple upgrade” turns into swapping the amplifier, recabling the axis, and re-qualifying the motion on your tool — in a validated fab environment, that’s a project, not a fix. For repair work, match the exact part number. If you’re genuinely planning a platform-level motion upgrade, tell us and we’ll discuss it as a project, not a parts swap.
Q6: Does this motor come with the gearhead?
This listing is for the motor only. If your assembly uses a planetary gearhead behind the motor, tell us the gearhead model — we stock common Sanyo Denki gearheads and can quote the assembly. And inspect the gearhead before reusing it: if it grinds, shows backlash, or was contaminated, reusing it will destroy your replacement motor in short order. A 400 gearhead killing a 1,500 motor is bad math.
Q7: How fast can you ship, and do you ship internationally?
Worldwide via DHL, FedEx, or UPS, typically 1–2 business days for in-stock units. Discontinued fab spares move fast — if you see stock, don’t sit on it for a week. Units ship in ESD-protective bagging with shaft protection, bubble-wrapped, double-boxed, with a QC Passed label and test date. For a tool-down emergency, call us directly — we’ll confirm physical shelf stock and shipping cutoff before you commit to the order.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626