Description
Core Product Summary
The SKYNET SNP-PA51 (part number 51197184-100) is a triple-output industrial desktop AC-DC power supply manufactured by Skynet in Taiwan, classified as a Level 3 I.T.E. power supply. It provides the classic three-rail DC output set used by industrial electronics: +5 VDC at 3 A, +12 VDC at 2.5 A, and -12 VDC at 0.3 A, for a total output power of 56.7 W.
The unit accepts a universal AC input of 115 VAC at up to 1 A or 230 VAC at up to 0.5 A, 50/60 Hz, so the same hardware installs on both mains standards without a selector change. Housed in a desktop-style enclosure measuring approximately 165 × 80 × 56 mm and weighing about 580 g, it is a direct replacement option for automation and control equipment that requires this 5 V / ±12 V supply configuration.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Industrial desktop AC-DC power supply (Level 3 I.T.E.) |
| Manufacturer | Skynet (Taiwan) |
| Part number | SNP-PA51 / 51197184-100 |
| AC input | 115 VAC at 1 A or 230 VAC at 0.5 A, 50/60 Hz (universal input) |
| Output 1 | ‘+5 VDC at 3 A |
| Output 2 | ‘+12 VDC at 2.5 A |
| Output 3 | ‘-12 VDC at 0.3 A |
| Total output power | 56.7 W |
| Number of outputs | 3 |
| Cooling | Convection (natural) |
| Dimensions | approx. 6.50 × 3.15 × 2.20 in (165 × 80 × 56 mm) |
| Weight | approx. 580 g |
| Origin | Taiwan |
| Related variants | SNP-PA51-B, SNP-PA51-H |
Engineering Selection Highlights
- Classic triple-rail output set: the +5 V / +12 V / -12 V configuration with these current ratings matches the supply requirements of card-based control systems, industrial PCs, and I/O chassis built in the 5 V / ±12 V era — verify the load on each rail stays within 3 A, 2.5 A, and 0.3 A respectively.
- Universal AC input: 115 VAC or 230 VAC, 50/60 Hz, means the same unit can be stocked as a spare for equipment running on either mains standard, simplifying inventory for multi-site facilities.
- Desktop / external mounting style: the unit is designed to sit outside the host equipment rather than on an internal chassis or DIN rail, so replacement means substituting the external supply and its DC cabling rather than reworking an internal power bay.
- Convection cooling: no fan, so there are no fan-service intervals; installation must allow free airflow around the enclosure and observe the ambient temperature limits of the equipment it feeds.
- Nameplate verification: units are marked with the model SNP-PA51 and part number 51197184-100, plus suffix variants such as -B and -H — matching the full designation, not just “PA51,” ensures the connector, output assignment, and mechanical format match the installed unit.
Dimensions, Mounting & Connection Notes
- Enclosure dimensions: approximately 6.50 × 3.15 × 2.20 in (165 × 80 × 56 mm), weight approximately 580 g.
- AC input connection for the 115/230 VAC mains; DC output cabling carries the three rails to the host equipment.
- The unit is convection cooled; allow free air circulation around the enclosure and avoid enclosing it without ventilation.
- Input ratings are 115 VAC at up to 1 A or 230 VAC at up to 0.5 A at 50/60 Hz; the supply is designed for one of the two mains standards at installation, selected by the local mains, without a hardware change.
Detailed Product Overview
The SNP-PA51 belongs to the class of external AC-DC power supplies built to the I.T.E. (information technology equipment) conventions: a self-contained desktop enclosure, universal mains input, and fixed regulated outputs on a DC cable set. Within Skynet’s SNP-PA5 series, it delivers 56.7 W across three rails — +5 V at 3 A, +12 V at 2.5 A, and -12 V at 0.3 A — which corresponds to 15 W, 30 W, and 3.6 W of rail power respectively. In practice, the +12 V rail carries the most load in typical applications, with the 5 V rail supporting logic and the -12 V rail providing only a small bias current for analog or serial-line circuitry.
Two engineering aspects of the unit matter most for selection. First, the universal input: with ratings for both 115 VAC at 1 A and 230 VAC at 0.5 A at 50/60 Hz, the supply is specified for worldwide mains without configuration, which makes it a practical spare part for equipment fleets spread across regions with different mains standards. Second, the mechanical format: as a desktop-style unit cooled by natural convection, it replaces like-for-like with other external supplies of similar outline, but it is not a drop-in for internally mounted or DIN-rail supplies; the DC connector and output assignment must match the host equipment, and suffix variants of the model (such as -B and -H) should be checked against the installed unit’s designation because they may differ in details not visible from the model base code alone.
For maintenance planning, the practical checks before ordering are the required rail currents on the host equipment (each must fit within the 3 A / 2.5 A / 0.3 A limits), the DC connector and pin assignment, the physical mounting situation for a desktop enclosure, and the ambient conditions at the installation point, since a convection-cooled supply depends on unrestricted airflow to hold its ratings.

SNP-PA51

SNP-PA51
Applications & System Role
In an automation cabinet or equipment set, the SNP-PA51 plays the power-supply role at the system level: it converts facility mains into the regulated low-voltage DC rails that electronic subsystems run on. The 5 V rail typically feeds logic circuitry, while +12 V and -12 V rails serve analog circuits, interface electronics, and communication hardware that require bipolar supply — a combination common in industrial computers, controllers, and instrumentation of the generation this supply was designed for.
Typical fit scenarios follow directly from the verified output structure: replacement of an external desktop supply in industrial control equipment; powering card cages or operator interfaces that require 5 V and ±12 V rails; and general service as a bench or system supply where 3 A of 5 V logic power with modest ±12 V capability is required.
FAQ
What is the SKYNET SNP-PA51?
It is a 56.7 W industrial desktop AC-DC power supply from Skynet (Taiwan), part number 51197184-100, classified as a Level 3 I.T.E. power supply.
What outputs does it provide?
Three DC outputs: +5 V at 3 A, +12 V at 2.5 A, and -12 V at 0.3 A.
What input voltage does it accept?
A universal AC input of 115 VAC at up to 1 A or 230 VAC at up to 0.5 A, 50/60 Hz.
How large and heavy is it?
Approximately 6.50 × 3.15 × 2.20 in (165 × 80 × 56 mm), weighing about 580 g.
How is it cooled?
By natural convection; there is no fan, so the installation must allow free airflow around the enclosure.
What equipment does it suit?
Systems requiring the classic 5 V / ±12 V supply configuration — industrial computers, controller and I/O hardware, and interface electronics with logic, analog, and bipolar supply requirements.
What are the SNP-PA51-B and SNP-PA51-H variants?
They are suffix variants of the same SNP-PA51 supply family; check the full designation on the installed unit, because connector or detail differences may exist between suffix versions.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626