Description
Core Product Summary
The Tetra Pak PME-1802-A-CD2 is a TRANS-DRIV DC motor controller used in Tetra Pak packaging-machine drive applications. It regulates a DC motor by supplying a controlled armature voltage while providing a separate field supply, allowing speed and torque to be managed by the machine control system.
The controller is associated with Danaher Motion / Kollmorgen designation 53N012A and Tetra Pak part numbers 90603-2560 and 90430-0067. It operates from a 230 VAC supply, produces a 195 VDC field output, and provides an adjustable 0–180 VDC armature output. External speed commands use 0–10 VDC signals, with 24 V logic inputs for speed-source selection.
Key Technical Specifications
| Item | Verified Information |
|---|---|
| Manufacturer / product family | Tetra Pak, TRANS-DRIV |
| Exact model | PME-1802-A-CD2 |
| Product type | DC motor controller / drive controller |
| Associated manufacturer designation | Danaher Motion / Kollmorgen 53N012A |
| Associated Tetra Pak part numbers | 90603-2560; 90430-0067 |
| Supply voltage | 230 VAC, +15% to -20% |
| Field output | 195 VDC |
| Armature output | 0–180 VDC |
| Continuous current | 2 A |
| Current limit | 2.5 A / 1.2 A |
| External speed inputs | 0–10 VDC |
| Logic inputs | 24 V logic |
| Auxiliary outputs | +12 VDC output; +20 VDC output, maximum 30 mA |
| Country of manufacture | Sweden |
| Weight | 500 g |
Engineering Selection Highlights
- DC drive architecture: The PME-1802-A-CD2 controls a DC motor through a 0–180 VDC armature output and a separate 195 VDC field supply, so replacement requires a DC motor with matching armature and field requirements.
- Supply compatibility: The controller is specified for a 230 VAC supply with a +15% to -20% tolerance, making supply-voltage verification important before installation.
- Current capacity: Its 2 A continuous-current rating and 2.5 A / 1.2 A current-limit settings define the motor-current envelope and should be matched to the driven motor and machine duty.
- Analog speed control: Three external speed inputs accept 0–10 VDC signals, with scaling associated with 0–120, 0–150, and 0–180 VDC armature voltage ranges.
- Logic-source selection: 24 V logic inputs select between internal and external speed modes, so control-wiring configuration must match the intended machine operating mode.
- Identification cross-reference: The unit is identified by PME-1802-A-CD2, 53N012A, 90603-2560, and 90430-0067; confirming all applicable markings helps avoid confusing it with unrelated power-supply listings.
Detailed Product Overview
The Tetra Pak PME-1802-A-CD2 is a TRANS-DRIV DC motor controller intended for use in Tetra Pak packaging equipment. It is a machine-level drive component rather than a general-purpose power supply: its function is to control a DC motor by regulating armature voltage and providing the associated field supply.
The controller operates from a 230 VAC supply with a specified tolerance of +15% to -20%. On the output side, it provides a 195 VDC field supply and an armature output adjustable from 0 to 180 VDC. This split between armature and field circuits is characteristic of a DC motor drive, where armature voltage influences motor speed and the field circuit supports the motor’s magnetic field.
Speed control is implemented through three 0–10 VDC external speed inputs. The documented scaling associates these inputs with armature-voltage ranges of 0–120 VDC, 0–150 VDC, and 0–180 VDC. The controller also includes 24 V logic inputs that select between internal and external speed modes, giving the machine control system a means to change the active speed-reference source.
Electrical limits are an important selection boundary. The unit is rated for 2 A continuous current, with current-limit settings of 2.5 A and 1.2 A. It also provides a +12 VDC output and a +20 VDC output limited to 30 mA, which can support low-power auxiliary functions within the associated control arrangement.
For procurement and service identification, the PME-1802-A-CD2 designation appears alongside Danaher Motion / Kollmorgen designation 53N012A and Tetra Pak part numbers 90603-2560 and 90430-0067. The unit is documented as manufactured in Sweden and weighs 500 g. When evaluating a replacement, the complete model designation, revision markings, and associated part numbers should be checked against the installed unit and machine documentation.

PME-1802-A-CD2

PME-1802-A-CD2
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Motor type | DC motor | The controller provides armature and field outputs for DC motor operation. |
| Armature circuit | 0–180 VDC output | The connected motor must be suitable for the available armature-voltage range. |
| Field circuit | 195 VDC field output | The motor field must match the controller’s field-supply arrangement. |
| AC supply | 230 VAC, +15% to -20% | Confirm the machine supply voltage and tolerance before connection. |
| Speed command | 0–10 VDC analog inputs | External speed references use analog voltage signals. |
| Mode selection | 24 V logic inputs | Logic states select internal or external speed operation. |
| Machine context | Tetra Pak packaging machinery | The controller is a Tetra Pak TRANS-DRIV machine drive component. |
Dimensions, Mounting & Connection Notes
| Item | Verified Information |
|---|---|
| Weight | 500 g |
| Country of manufacture | Sweden |
| Connection-related outputs | +12 VDC output; +20 VDC output, maximum 30 mA |
| Logic interface | 24 V logic inputs |
| Analog interface | Three 0–10 VDC external speed inputs |
Applications & System Role
The PME-1802-A-CD2 functions as a local DC motor controller within Tetra Pak packaging machinery. Its role is to convert machine-control commands into controlled armature voltage for a DC motor, while maintaining the field supply required for motor operation.
The controller supports external analog speed references and logic-based selection between internal and external speed modes. This arrangement allows the packaging machine control system to command motor speed while the controller manages the motor’s electrical operating limits. In a Tetra Pak machine, it is part of the drive layer between the machine controller and the DC motor driving a machine function.
FAQ
What is the Tetra Pak PME-1802-A-CD2?
It is a Tetra Pak TRANS-DRIV DC motor controller used in packaging-machine drive applications.
What type of motor does it control?
It controls a DC motor through a 0–180 VDC armature output and a 195 VDC field supply.
What supply voltage does the PME-1802-A-CD2 require?
It requires a 230 VAC supply with a tolerance of +15% to -20%.
What are its current ratings?
The controller is rated for 2 A continuous current and has current-limit settings of 2.5 A and 1.2 A.
How is external speed commanded?
External speed references are provided through 0–10 VDC analog inputs.
What do the 24 V logic inputs do?
They select between internal and external speed modes.
Which related part numbers are associated with this controller?
The controller is associated with Danaher Motion / Kollmorgen 53N012A and Tetra Pak part numbers 90603-2560 and 90430-0067.
What auxiliary outputs does it provide?
It provides a +12 VDC output and a +20 VDC output with a maximum current of 30 mA.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626