Description
Core Product Summary
The TRACO POWER TIS 600-124 SIG is a 576 W industrial switching power supply for DIN-rail mounting. It delivers a single adjustable 24 VDC output, adjustable from 24 to 28 VDC, with a maximum output current of 24 A.
The SIG version adds an AC-power-fail relay contact, a Power Good relay contact, and external On/Off control. Designed for industrial process-control systems and machine tools, the unit accepts 93–132 VAC or 187–264 VAC input, uses screw-terminal connections, and provides reinforced insulation with 4000 VDC input-to-output isolation.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | TRACO POWER |
| Model number | TIS 600-124 SIG |
| Product type | Industrial switching power supply with signal module |
| Series | TIS |
| Output voltage | 24 VDC, adjustable from 24 to 28 VDC |
| Output current | 24 A maximum |
| Output power | 576 W |
| Number of outputs | Single |
| AC input voltage | 93–132 VAC and 187–264 VAC |
| Input frequency | 50/60 Hz |
| Efficiency | 90% |
| SIG functions | AC-power-fail relay contact, Power Good relay contact, external On/Off control |
| Input-to-output isolation | 4000 VDC |
| Insulation system | Reinforced insulation |
| Safety approvals | EN 60950-1, EN 62368-1, UL 508 |
| Operating temperature | -25°C to +70°C |
| Housing | Metal case |
| Mounting | DIN rail |
| Connection type | Screw terminal |
| Dimensions | 243 × 83 × 177.2 mm (L × W × D) |
| Weight | 2000 g |
| Compatible accessories | MK-600, TIS PLUG-6-SIG |
Engineering Selection Highlights
- The TIS 600-124 SIG provides 576 W at 24 VDC and up to 24 A, so load calculations should use the 24 A continuous output limit and the 24–28 VDC adjustment range.
- The SIG configuration adds AC-power-fail and Power Good relay contacts, allowing the supply to report input-power loss and output-ready status to a PLC, DCS, or monitoring system.
- External On/Off control is included in the SIG version, enabling the supply to be switched from a control-system contact or supervisory circuit.
- The unit accepts both 93–132 VAC and 187–264 VAC input ranges, supporting installation on either low- or high-range single-phase AC systems.
- Reinforced insulation and 4000 VDC input-to-output isolation support separation between the AC mains input and the 24 VDC control-power output.
- The metal-case, DIN-rail construction and screw-terminal connections suit cabinet-mounted industrial power distribution.
- The compatible MK-600 and TIS PLUG-6-SIG accessories should be considered when planning mounting or signal-module wiring.

TIS 600-124 SIG

TIS 600-124 SIG
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Load voltage | 24 VDC output, adjustable from 24 to 28 VDC | Confirm that connected devices tolerate the selected output setting. |
| Load current | Up to 24 A | Total connected load must remain within the 576 W / 24 A output rating. |
| AC input | 93–132 VAC or 187–264 VAC, 50/60 Hz | Select and wire the input arrangement according to the available single-phase supply. |
| Status monitoring | AC-power-fail and Power Good relay contacts | Connect these contacts to a PLC, alarm system, or supervisory monitoring input as required. |
| Remote control | External On/Off control | Use the SIG control input when remote starting or stopping of the supply is required. |
| Mounting | DIN-rail mounting | Install in an enclosure appropriate for the industrial environment and cooling requirements. |
| Connections | Screw terminals | Use conductors and terminal arrangements compatible with the screw-terminal interface. |
| Accessories | MK-600 and TIS PLUG-6-SIG | These are listed as compatible accessories for the TIS 600-124 SIG. |
Dimensions, Mounting & Connection Notes
The TIS 600-124 SIG measures 243 mm long, 83 mm wide, and 177.2 mm deep, and weighs 2000 g. It is housed in a metal case and mounts on a DIN rail.
Electrical connections are made through screw terminals. The supply provides a single 24 VDC output, adjustable from 24 to 28 VDC, and the SIG option provides the AC-power-fail relay contact, Power Good relay contact, and external On/Off control interface.
The power supply is specified for operation from -25°C to +70°C. Cabinet placement should account for the unit’s dimensions, weight, heat dissipation, and the required clearance for screw-terminal wiring.
Detailed Product Overview
The TRACO POWER TIS 600-124 SIG is a 576 W single-output switching power supply intended for industrial control cabinets and machine-mounted electrical equipment. It belongs to TRACO POWER’s TIS series, which is designed for process-control and machine-tool applications where stable DC power and immunity to electrical disturbance are required.
The model provides a 24 VDC output that can be adjusted from 24 to 28 VDC. Its maximum output current is 24 A, corresponding to 576 W of output power. This makes the unit suitable for a substantial 24 VDC control-power bus, but the connected load must be evaluated against both the current and power limits. The output is single-channel, so multiple loads are supplied from the same regulated DC output.
The SIG suffix identifies the version equipped with a signal module. This adds three functions: an AC-power-fail relay contact, a Power Good relay contact, and external On/Off control. The AC-power-fail contact reports loss of the AC input supply, while the Power Good contact reports the availability of the DC output. These signals can be monitored by a PLC, DCS, alarm panel, or other supervisory equipment. The external On/Off control allows the supply to be enabled or disabled through an external control contact.
The unit accepts 93–132 VAC and 187–264 VAC input at 50/60 Hz. It provides reinforced insulation and 4000 VDC isolation between input and output. The documented efficiency is 90%. Safety approvals include EN 60950-1, EN 62368-1, and UL 508.
Physically, the TIS 600-124 SIG is a metal-case, DIN-rail-mounted unit with screw-terminal connections. Its dimensions are 243 × 83 × 177.2 mm, and its weight is 2000 g. The specified operating-temperature range is -25°C to +70°C. The compatible MK-600 and TIS PLUG-6-SIG accessories support installation and signal-module wiring requirements.
Applications & System Role
The TIS 600-124 SIG serves as the primary 24 VDC control-power source in an industrial control cabinet. It converts single-phase AC mains power into regulated DC power for PLCs, I/O systems, instruments, relays, contactors, sensors, and other 24 VDC loads.
The SIG functions make the unit particularly relevant where the control system must know whether mains power has failed or whether the DC output is available. The AC-power-fail and Power Good relay contacts can be wired to a controller or alarm circuit, while the external On/Off control allows the supply to be controlled from a higher-level system.
The TIS series is designed for industrial process-control systems and machine tools. In such installations, the power supply forms the interface between the AC distribution system and the DC control-power bus.
FAQ
What is the TRACO POWER TIS 600-124 SIG?
It is a 576 W industrial DIN-rail switching power supply with a single adjustable 24 VDC output and an integrated signal module.
What output does the TIS 600-124 SIG provide?
It provides 24 VDC, adjustable from 24 to 28 VDC, at up to 24 A.
What does the SIG option include?
The SIG option includes an AC-power-fail relay contact, a Power Good relay contact, and external On/Off control.
What AC input voltage does it accept?
It accepts 93–132 VAC and 187–264 VAC at 50/60 Hz.
What isolation does the power supply provide?
It provides reinforced insulation with 4000 VDC isolation between input and output.
How is the TIS 600-124 SIG mounted?
It is a metal-case unit designed for DIN-rail mounting and uses screw-terminal connections.
What are its dimensions and weight?
The unit measures 243 × 83 × 177.2 mm and weighs 2000 g.
Which accessories are compatible with this model?
The listed compatible accessories are the MK-600 and TIS PLUG-6-SIG.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626