Sale!

VEXTA PH265-02 Oriental Motor 2-Phase Stepping Motor

Parameter Value
Product type Stepping motor (stepper motor)
Brand / manufacturer VEXTA / Oriental Motor Co., Ltd.
Series PH type stepping motors
Model PH265-02
Phase count 2-phase
Basic step angle 1.8° per step (200 full steps per revolution)
Shaft configuration Single shaft (PH265-02); double-shaft version available as PH265-02B
Drive requirement 2-phase stepping motor driver (motor is not an integrated driver package)
Categories: , , , , SKU: PH265-02 Brand:

Description

Core Product Summary

The VEXTA PH265-02 is a 2-phase stepping motor from the PH type stepping motor series of Oriental Motor Co., Ltd., sold under the VEXTA brand. It is a permanent-magnet hybrid-style stepper with a basic step angle of 1.8° per step, corresponding to 200 full steps per revolution, and it is designed for positioning applications driven by a 2-phase stepping motor driver.

Within the PH series numbering, PH265-02 is the single-shaft configuration; a double-shaft version is designated PH265-02B. The PH series spans several frame lengths in the same 1.8° 2-phase design, so the model number suffix — not the frame appearance alone — identifies the specific winding configuration fitted to this unit.

 

Key Technical Specifications

Parameter Value
Product type Stepping motor (stepper motor)
Brand / manufacturer VEXTA / Oriental Motor Co., Ltd.
Series PH type stepping motors
Model PH265-02
Phase count 2-phase
Basic step angle 1.8° per step (200 full steps per revolution)
Shaft configuration Single shaft (PH265-02); double-shaft version available as PH265-02B
Drive requirement 2-phase stepping motor driver (motor is not an integrated driver package)
PH265-02

PH265-02

PH265-02

PH265-02

Detailed Product Overview

The PH265-02 belongs to an older generation of Oriental Motor’s VEXTA stepping motors, the PH type series, which was offered as a standalone (motor-only) product rather than today’s more common motor-and-driver packages. That distinction matters for an engineer planning to use this part: the motor contains no electronics, so it must be paired with a 2-phase stepping motor driver whose output current and excitation mode match the motor’s winding. The driver defines whether the motor runs in full-step, half-step, or other excitation schemes, and the winding rating of this specific model must be confirmed from the motor’s nameplate or the original catalog sheet before a driver is selected — the PH series used several different winding options within the same frame family, which is why the suffix digits in the model number carry electrical meaning.

The 1.8° basic step angle is the standard resolution for 2-phase hybrid stepping motors: 200 discrete positions per input-shaft revolution in full-step excitation, refinable through half- or microstepping at the driver. For a replacement or repair scenario, the two identification points to verify are the exact model marking “PH265-02” on the motor label and the shaft arrangement — this is the single-shaft version, while the PH265-02B carries a rear shaft extension typically used for mounting an encoder, handwheel, or brake.

Because the PH series predates Oriental Motor’s current product catalogs, no live OEM documentation page exists for this model. Anyone integrating a PH265-02 into a new design should treat it as a replacement-oriented component: confirm the winding data from the physical motor before specifying the driver, power supply, and operating speed-torque point, since the original speed–torque characteristic for this exact winding can no longer be verified against a current official source.

 

FAQ

What is the VEXTA PH265-02?
It is a 2-phase stepping motor made by Oriental Motor Co., Ltd. under the VEXTA brand, belonging to the PH type stepping motor series.

What is its step angle?
The basic step angle is 1.8° per step, which equals 200 full steps per shaft revolution.

What does the “-02” suffix mean?
Within the PH series, the suffix digits identify the winding configuration of the motor. The full model marking on the nameplate should be used for identification; PH265-02 is the single-shaft version.

Is there a double-shaft version?
Yes. The double-shaft variant of this motor is designated PH265-02B, with the additional rear shaft typically used for encoder or accessory mounting.

Does it need a driver?
Yes. It is a motor-only component without integrated electronics and must be operated with a 2-phase stepping motor driver whose settings match the motor’s winding.

Is current documentation available from the manufacturer?
The PH series is a legacy VEXTA product line; verify winding data from the motor’s nameplate or original catalog documentation when specifying replacement drivers or spares.