Sale!

Vibro-Meter MPC4 200-510-076-114 VM600 Machinery Protection Card

  • Model: MPC4
  • Part Number: 200-510-076-114
  • Brand: Vibro-Meter (Meggitt)
  • Series: VM600 Machinery Protection System (MPS)
  • Core Function: Multi-channel machinery protection and monitoring
  • Product Type: Machinery Protection Card
  • Key Specs: 4 dynamic channels + 2 tachometer channels; programmable for acceleration, velocity, displacement
  • Condition: New Original / New Surplus
Categories: , , , , SKU: MPC4 200-510-076-114 Brand:

Description

3. Key Technical Specifications

  • Dynamic signal inputs: 4 independent, fully programmable channels
  • Accepted signals: Acceleration, velocity, displacement (proximity probes), and other dynamic parameters
  • Tachometer (speed) inputs: 2 channels (proximity, magnetic pickup, or TTL)
  • Processing capabilities: Relative and absolute vibration, Smax, eccentricity, thrust position, absolute/differential housing expansion, dynamic pressure
  • Frequency range: Analog DC to 60 kHz (–3 dB)
  • Input ranges: DC 0 to ±20 V; AC ±10 V max
  • Common mode voltage range: –50 to +50 V
  • CMRR: >60 dB at 50 Hz
  • Crosstalk: –72 dB
  • Input impedance: 200 kΩ
  • Front-panel features: BNC connectors for buffered raw signals; status LEDs for processing errors, OK system, and alarms
  • Pairing: Requires corresponding IOC4T input/output card
  • Versions: Standard, separate circuits, and safety (SIL) versions available
  • Form factor: VM600 rack-mount card (hot-swappable)
  • Note: Exact hardware revision, firmware, and SIL rating must be confirmed against the unit label and system configuration.

4. Product Introduction

The Vibro-Meter MPC4 (P/N 200-510-076-114) is the central machinery protection card in the VM600 series. It simultaneously monitors up to four dynamic signal inputs and two speed channels, performing real-time multi-parameter processing for critical rotating equipment.

Engineers rely on the MPC4 for continuous protection of turbines, compressors, and other high-value machinery. The card delivers programmable measurement of vibration, position, and related parameters, with buffered outputs and clear front-panel status indication for reliable operation in rack-based VM600 systems.

5. Troubleshooting Quick Reference

Symptom Possible Cause Relevance to this Part Quick Check Method Recommendation
No measurement or “Not OK” status Sensor/cable fault or channel configuration error ✅ High Check gap voltage / sensor supply and front-panel LEDs Verify sensor wiring and channel settings; replace if hardware fault confirmed
Processing or hardware error LED on Internal fault or configuration mismatch ✅ High Note exact LED pattern and review system diagnostics Reseat card; update configuration; replace card if error persists
Missing or incorrect speed signal Tachometer input wiring or sensor issue ✅ High Verify speed sensor signal at BNC or terminals Check sensor type, wiring, and configuration
Alarms trigger incorrectly Wrong setpoints, filtering, or hysteresis ✅ Medium Review Alert/Danger levels and time delays Adjust setpoints and filtering to match application
No communication with rack / IOC4T Backplane contact or pairing issue ✅ High Confirm IOC4T is present and correctly seated Reseat both cards; verify rack power and backplane
Buffered BNC signal abnormal Sensor or input circuit problem ✅ Medium Scope the raw signal at the front-panel BNC Isolate to sensor chain or replace MPC4

If the fault cannot be isolated, photograph the card (including labels and LEDs), note the exact part number and revision, and contact technical support with system details.

MPC4 200-510-076-114

MPC4 200-510-076-114

MPC4 200-510-076-114

MPC4 200-510-076-114

6. Frequently Asked Questions (FAQ)

Q: What is the primary function of the MPC4 200-510-076-114?
A: It is the main machinery protection card in the VM600 system. It processes up to four dynamic signals and two speed inputs for real-time protection and monitoring of rotating machinery.

Q: Which sensors can be connected?
A: The dynamic channels accept signals from accelerometers, velocity sensors, and proximity (eddy-current) probes. The tachometer channels support proximity, magnetic pickup, or TTL speed sensors.

Q: Does the MPC4 work alone?
A: No. It operates as a card pair with a corresponding IOC4T input/output card in a VM600 rack.

Q: Is the card hot-swappable?
A: Yes. The MPC4 is designed for hot-swap replacement within a powered VM600 rack (follow proper safety and system procedures).

Q: Are there different versions of the MPC4?
A: Yes. Standard, separate-circuits, and safety (SIL) versions exist. Confirm the exact variant required for your application, especially for functional safety systems.

Q: Can it measure both vibration and position?
A: Yes. The programmable channels support relative/absolute vibration, thrust position, eccentricity, Smax, and related parameters.

Q: What condition and warranty do you offer?
A: We supply New Original / New Surplus stock. Units are inspected for basic functionality. Standard coverage is a 1-year warranty against defects. Provide the complete part number 200-510-076-114 (and any revision or SIL marking) when ordering or requesting support.