Description
Core Product Summary
The Vibro-Meter VM600 CPUM (Part Number 200-595-100-014) is a modular central processing unit and rack controller card designed for the VM600 machinery protection and condition monitoring systems. It acts as the primary system controller and data communications gateway, managing the configuration of monitoring cards and facilitating fieldbus integration.
This module features an embedded processor running a real-time operating system, providing front-panel display capabilities and direct configuration management. It supports redundant Ethernet communications and serial interfaces, enabling seamless integration with Modbus TCP, Modbus RTU, and PROFINET networks. The CPUM card is designed to be paired with an IOCN input/output card to unlock rear-panel connectivity and full system redundancy features within a standard VM600 ABE04x rack.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product Family | Vibro-Meter VM600 Series |
| Module Type | CPUM Modular CPU Card (Rack Controller & Communications Interface) |
| Part Number (PNR) | 200-595-100-014 |
| Processor | AMD Geode™ LX800 at 500 MHz |
| Memory | 256 MB DRAM |
| Operating System | QNX |
| Power Supply | 5 VDC (supplied by VM600 rack power supply) |
| Power Consumption | < 10 W (CPUM card only); ≤ 12 W (with paired IOCN card) |
| Primary Ethernet Interface | 10/100BASE-TX (up to 100 Mbps) for VM600 MPSx software, Modbus TCP, PROFINET |
| Secondary Ethernet Interface | 10/100BASE-TX (via IOCN card) for Modbus TCP |
| Primary Serial Interface | RS-232 (up to 115.2 kBaud) for VM600 MPSx software |
| Secondary Serial Interface | RS-232 or RS-485 half/full-duplex (via IOCN card, up to 115.2 kBaud) for Modbus RTU |
| Supported Protocols | Modbus TCP, Modbus RTU, PROFINET, Meggitt proprietary TCP/IP |
| Mounting | Front panel of VM600 ABE04x system rack (paired with rear IOCN card) |
Detailed Product Overview
The Vibro-Meter VM600 CPUM 200-595-100-014 serves as the central intelligence hub for VM600 rack-based machinery protection systems (MPS) and condition monitoring systems (CMS). By integrating a dedicated processor and real-time operating system, the CPUM card offloads communication and configuration tasks from external hosts, ensuring deterministic performance in critical rotating machinery applications such as turbines, compressors, and generators.
A primary function of the CPUM module is configuration management. It maintains the setup parameters for installed monitoring card pairs (such as MPC4/IOC4T, AMC8/IOC8T, and XMx16/XIO16T) and supports hot-swapping with automatic reconfiguration, minimizing system downtime during maintenance. The module also provides a front-panel display for local status monitoring and alarm reset capabilities.
Network integration is a core strength of this variant. The CPUM card provides a primary Ethernet port and a primary RS-232 serial port on its front panel for direct connection to engineering workstations running VM600 MPSx software. When paired with the corresponding IOCN input/output card, the system unlocks secondary rear-panel interfaces, including a secondary Ethernet port and an isolated RS-232/RS-485 port. This architecture enables robust, segregated network topologies, allowing simultaneous connection to a primary control system via PROFINET or Modbus TCP while maintaining a dedicated maintenance link.

VM600 CPUM 200-595-100-014

VM600 CPUM 200-595-100-014
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Required Companion Module | IOCN Input/Output Card | Required to access secondary Ethernet/serial interfaces and full rear-panel connectivity. |
| Supported Rack Systems | VM600 ABE04x (6U) System Racks | Installs in the front slot (typically slot 00 or 01) of the rack. |
| Managed Monitoring Cards | MPC4/IOC4T, AMC8/IOC8T, XMx16/XIO16T | CPUM manages configuration and supports hot-swapping for these pairs. |
| Power Requirement | 5 VDC from VM600 RPS6U | Draws < 10 W; must be accounted for in total rack power budget. |
| Software Dependency | VM600 MPSx or VibroSight | Required for initial configuration, firmware updates, and advanced network management. |
| Network Protocols | Modbus TCP, Modbus RTU, PROFINET | Protocol support is contingent on the specific firmware version and IOCN pairing. |
Dimensions, Mounting & Connection Notes
- Mounting Method: Front-panel installation in a standard 19-inch VM600 ABE04x system rack.
- Companion Mounting: The associated IOCN card must be installed in the corresponding rear slot to complete the electrical interface and provide rear-panel network connections.
- Connection Type:
- Front: RJ45 (Primary Ethernet), DB9 or equivalent (Primary RS-232), and local display/interface controls.
- Rear (via IOCN): RJ45 (Secondary Ethernet), terminal blocks or DB9 (Secondary RS-232/RS-485).
- Thermal Management: Relies on standard rack airflow; unpopulated slots in the VM600 rack must be covered with blank panels to maintain proper cooling and electromagnetic compatibility.
FAQ
What is the function of the Vibro-Meter VM600 CPUM 200-595-100-014?
It acts as the central rack controller and communications interface for the VM600 machinery protection system, managing card configurations, providing a local display, and gatewaying data to external control systems.
Does the CPUM card require a companion module?
Yes, to utilize secondary network interfaces (rear Ethernet and RS-232/RS-485) and full system functionality, the CPUM card must be paired with an IOCN input/output card installed in the rear of the rack.
Which communication protocols are supported by the CPUM module?
The module supports Modbus TCP, Modbus RTU, and PROFINET for fieldbus integration, alongside a proprietary Meggitt TCP/IP protocol for communication with VM600 MPSx configuration software.
What is the power consumption of the CPUM 200-595-100-014?
The CPUM card consumes less than 10 W of power at 5 VDC. When paired with an IOCN card, the total power consumption for the pair is 12 W or less.
Can the CPUM card manage hot-swapping of monitoring modules?
Yes, the CPUM acts as a rack controller that manages the configuration of compatible monitoring card pairs and supports hot-swapping with automatic reconfiguration.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626