Description
Core Product Summary
The Yaskawa SJDE-08ANA-OY is a 750 W Junma ML-II servo drive with an integrated MECHATROLINK-II communication interface. It is designed for single-phase 200 to 230 V AC operation and pairs with the SJME-08AMB41-OY servo motor.
The drive provides 3.7 A RMS continuous output current and 11.1 A maximum output current. It uses PWM control with a sine-wave current drive system and accepts 13-bit-equivalent analog incremental encoder feedback. Built-in functions include dynamic braking, over-travel prevention, emergency stop, electronic gearing, and brake-interlock output.
Key Technical Specifications
| Item | Specification |
|---|---|
| Manufacturer / model | Yaskawa SJDE-08ANA-OY |
| Product type | Servo drive / servo amplifier |
| Series | Junma ML-II |
| Applicable motor capacity | 750 W |
| Compatible servo motor | SJME-08AMB41-OY |
| Continuous output current | 3.7 A RMS |
| Maximum output current | 11.1 A RMS |
| Input voltage | Single-phase 200 to 230 V AC, +10% / -15%, 50/60 Hz |
| Input capacity | 2.2 kVA |
| Control method | PWM control, sine-wave current drive |
| Feedback | Analog incremental encoder, 13-bit incremental equivalent |
| Communication interface | MECHATROLINK-II |
| Allowable load inertia | 10.0 × 10⁻⁴ kg·m², without external regeneration unit |
| Built-in dynamic brake | Operates on main power OFF, servo alarm, or servo OFF |
| Regenerative processing | Optional; use JUSP-RG08D external regeneration unit when required |
| Sequence inputs | 5 fixed inputs: external latch, zero-return reduced speed, forward inhibit, reverse inhibit, emergency stop |
| Sequence outputs | 2 fixed outputs: servo alarm and brake interlock |
| Indicators | PWR, RDY, COM, and ALM LEDs |
| Operating temperature | 0 to 55 °C |
| Storage temperature | -20 to 70 °C |
| Humidity | 90% RH maximum, non-condensing |
| Altitude | 1000 m maximum |
| Vibration resistance | 4.9 m/s² (0.5 G) |
| Shock resistance | 19.6 m/s² (2 G) |
| Mounting | Base-mounted |
| Approximate mass | 1.4 kg |
Detailed Product Overview
The Yaskawa SJDE-08ANA-OY is the 750 W model in the Junma ML-II servo-drive family. Its model code identifies a Junma servo drive for a 750 W motor, 200 V AC supply class, standard design revision, and MECHATROLINK-II control interface.
The drive is intended for use with the SJME-08AMB41-OY servo motor, which provides 2.39 N·m rated torque at 3000 min⁻¹. The SJDE-08ANA-OY supplies 3.7 A RMS continuously and 11.1 A RMS at maximum output, using PWM control and sine-wave current drive.
MECHATROLINK-II communication handles sequence, motion, data-setting, reference, monitoring, adjustment, and other commands. This reduces control wiring compared with discrete command interfaces and allows the drive to be integrated into a MECHATROLINK-II motion network.
The drive includes five fixed sequence inputs and two fixed sequence outputs. The inputs cover external latch, zero-return reduced speed, forward and reverse run inhibition, and emergency stop. The outputs provide servo-alarm and brake-interlock signals. A four-LED front panel indicates power, ready status, communication status, and alarm condition.
The SJDE-08ANA-OY includes a dynamic brake that operates when main power is removed, when a servo alarm occurs, or when the servo is turned OFF. Regenerative energy handling is optional: when regenerated energy exceeds the drive’s capability, install the JUSP-RG08D external regeneration unit.

SJDE-08ANA-OY

SJDE-08ANA-OY
Dimensions, Mounting & Connection Notes
The SJDE-08ANA-OY is a base-mounted servo drive with an approximate mass of 1.4 kg. Its documented outline dimensions are 130 mm wide, 150 mm high, and 45 mm deep, with a cooling fan and defined airflow direction.
Install the drive with the cooling fan orientation and airflow path shown in the manufacturer’s installation documentation. Maintain the specified installation clearances and ensure the mounting surface provides adequate heat dissipation.
The drive provides CN1 for control and communication connections, CN2 for the servo motor encoder, CN6 for the motor power connection, and CNA/CNB for option connections. Use the documented MECHATROLINK-II cable, R7A-CNA01R, for network connection.
The drive accepts single-phase 200 to 230 V AC power for both the main and control circuits. For applications with excessive regenerative energy, connect the optional JUSP-RG08D external regeneration unit. If a holding brake is required, use the documented R7A-FIZN109-BE brake module.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Servo system | Yaskawa Junma ML-II | The SJDE-08ANA-OY is a Junma ML-II servo drive |
| Servo motor | SJME-08AMB41-OY | Documented 750 W motor pairing for this drive |
| Supply voltage | Single-phase 200 to 230 V AC, +10% / -15%, 50/60 Hz | Supplies both main and control circuits |
| Feedback | 13-bit-equivalent analog incremental encoder | Uses the compatible Junma servo motor encoder |
| Network | MECHATROLINK-II | Handles sequence, motion, monitoring, adjustment, and data-setting commands |
| External regeneration | JUSP-RG08D | Install when regenerated energy is too large for the drive alone |
| Brake module | R7A-FIZN109-BE | Documented brake-module option for the SJDE-08ANA-OY |
| Communication cable | R7A-CNA01R | Documented MECHATROLINK-II communication cable |
| Control interface | MECHATROLINK-II commands | The -N code in the model number identifies the MECHATROLINK-II version |
| Mounting | Base-mounted | Install with the specified orientation and cooling-air clearance |
FAQ
What iswa ?
It is a 750 W Junma ML-II servo drive with an integrated MECHATROLINK-II communication interface.
What motor is compatible with the SJDE-08ANA-OY?
It is paired with the SJME-08AMB41-OY servo motor, a 750 W Junma motor rated for 2.39 N·m at 3000 min⁻¹.
What supply voltage does it require?
It requires single-phase 200 to 230 V AC, +10% / -15%, at 50 or 60 Hz.
What are its output-current ratings?
It provides 3.7 A RMS continuous output current and 11.1 A RMS maximum output current.
What communication interface does it use?
It uses MECHATROLINK-II for sequence, motion, reference, monitoring, adjustment, and data-setting commands.
What feedback does it accept?
It accepts analog incremental encoder feedback with 13-bit incremental-equivalent resolution.
Does it include a dynamic brake?
Yes. The dynamic brake operates when main power is OFF, when a servo alarm occurs, or when the servo is turned OFF.
When is an external regeneration unit required?
Install the JUSP-RG08D external regeneration unit when regenerated energy exceeds the drive’s built-in regenerative-processing capability.
Documented Performance Data
| Metric | Value / Range | Operating Condition |
|---|---|---|
| Applicable motor capacity | 750 W | with SJME-08AMB41-OY |
| Continuous output current | 3.7 A RMS | |
| Maximum output current | 11.1 A RMS | |
| Input capacity | 2.2 kVA | Single-phase 200 to 230 V AC, 50/60 Hz |
| Allowable load inertia | 10.0 × 10⁻⁴ kg·m² | Without external regeneration unit |
| Vibration resistance | 4.9 m/s² (0.5 G) | Junma ML-II servo drive |
| Shock resistance | 19.6 m/s² (2 G) | Junma ML-II servo drive |
| Peak torque capability | 300% of nominal torque for 3 seconds | Junma ML-II servo system |

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626