Sale!

YOKOGAWA NFJT100-S10E STARDOM Terminal Board Unit

  • Model: NFJT100-S10E
  • Brand: Yokogawa
  • Series: STARDOM Network-based Control System (FCN / FCJ Series)
  • Core Function: Signal route consolidation and terminal interfacing between field instruments and I/O racks.
  • Product Type: Fieldbus Terminal Board Unit
  • Key Specs: Screw terminal block assembly | Dual-connector signal interface | DIN-rail or baseplate mounting
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Critical passive infrastructure spare; essential for maintaining uninterrupted signal continuity in automation cabinets.
Categories: , , , , SKU: NFJT100-S10E Brand:

Description

Key Technical Specifications

Parameter Value
Manufacturer Yokogawa Electric Corporation
Series STARDOM FCN / FCJ Control System
Model Code NFJT100-S10E
Module Classification Signal Terminal / Connection Board
Termination Type Heavy-duty screw terminal block assembly
Insulation Resistance 100 MΩ minimum at 500 V DC
Operating Temperature −10 to +55°C
Storage Temperature −20 to +70°C
Mounting Method DIN-rail or dedicated baseplate installation
Signal Compatibility Standard Yokogawa STARDOM I/O cabling profiles

 

Product Introduction & Supply Chain Strategy

The Yokogawa NFJT100-S10E is a fieldbus terminal board unit engineered to provide passive signal route consolidation between field instrumentation and Yokogawa STARDOM controller I/O infrastructure. It provides clean physical organization, secure terminal anchoring, and robust electrical isolation to protect sensitive control electronics from field-level electrical transients.

Acquiring this termination board as New Surplus ensures lifecycle continuity for aging control cabinets while managing Total Cost of Ownership (TCO). Sourcing unverified or second-hand passive hardware introduces hidden risks, including micro-cracked solder traces, oxidized screw blocks, and compromised dielectric isolation. Stocking certified surplus components guarantees pristine signal paths, eliminating unexpected I/O loop failures and expensive plant downtime.

 

Installation & Configuration Guide

1.Pre-Installation (Prep & Safety):Estimated time: 10 mins.

Execute proper lock-out/tag-out (LOTO) procedures and isolate all field loop power supplies connected to the target terminal block. Put on a grounded ESD wrist strap, map existing wire numbers to terminal positions with detailed reference notes, and verify zero voltage across the connection rails using a calibrated digital multimeter.

2.Removal:Estimated time: 15 mins.

Disconnect multi-pin system interface cables carefully from the board connectors. Undo individual field wire terminations after labeling each conductor clearly, then unclip or unbolt the legacy terminal board from its mounting rail.

3.Installation (Clone & Seat):Estimated time: 15 mins.

Mount the replacement NFJT100-S10E securely onto the DIN-rail or backplate. Reconnect field conductors to the corresponding screw terminals, maintaining proper torque specifications to prevent loose connections without fracturing internal traces. Plug the system ribbon or multi-core cables firmly into their respective board headers.

4.Power-On & Testing:Estimated time: 10 mins.

Inspect all wiring paths and shield grounds to verify correct placement. Re-energize the loop power sources and check that channel status indicators on the corresponding STARDOM I/O modules reflect healthy, error-free signal transmission across all active loops.

NFJT100-S10E

NFJT100-S10E

NFJT100-S10E

NFJT100-S10E

Firmware/Software Versions & Upgrade Notes

  • Recommended Version: As a passive signal termination and routing board, the NFJT100-S10E does not execute onboard firmware or software scripts.
  • Compatibility Notes: Ensure the part number matches your specific STARDOM FCN/FCJ I/O configuration matrix to guarantee complete pinout alignment between field multi-core cables and controller modules.
  • Risk Management: Avoid forcing mismatched multi-pin connectors onto the board headers during installation, as bent pins can cause intermittent open circuits across multiple data channels simultaneously.

 

Frequently Asked Questions (FAQ)

Is this terminal board a Brand New Surplus unit?

This product is a Brand New Surplus unit. It features original factory packaging, pristine unoxidized terminal screws, and has never been installed in an active industrial facility. We strictly reject second-hand, salvaged, or refurbished components.

Why choose New Surplus for passive terminal boards?

While terminal boards are passive hardware, older or second-hand units often suffer from degraded dielectric properties, rust on screw clamps, or microscopic fatigue fractures on the PCB traces from high-vibration environments. Buying New Surplus guarantees factory-level reliability and prevents intermittent signal dropouts.

Does replacing this terminal board require shutting down the controller CPU?

No, as long as the specific I/O loops tied to this board are safely isolated or bypassed within your plant operating procedure. However, always kill external loop power to prevent accidental short circuits or equipment damage during wire transfer.

What warranty is included with this unit?

Every unit is backed by a comprehensive 1-year replacement warranty, validating our strict inbound electrical continuity and physical inspection standards.

How do I prevent wiring errors during replacement?

Always map and label individual field conductors before removal. Using a systematic wire-by-wire transfer method from the old unit to the replacement NFJT100-S10E ensures 100% pinout accuracy and eliminates costly commissioning errors.