Description
Core Product Summary
The Yokogawa UD1CG3-004N-1AA-2SA-NCN is an Intelligent Drive (servo amplifier) from the DrvGIII series. It is designed to control Yokogawa DYNASERV direct-drive motors of the DM1C series rated for 4 N·m torque.
The unit operates on a 200 VAC power system, supports standard resolution feedback, and provides a standard controller interface with differential pulse input and 12–24 V contact I/O. The “/CN” designation indicates that a set of connectors is included. It is intended for high-precision positioning applications that use Yokogawa’s outer-rotor direct-drive motors.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Yokogawa Electric Corporation |
| Series | DrvGIII Intelligent Drive |
| Model | UD1CG3-004N-1AA-2SA-NCN |
| Compatible motor | DYNASERV DM1C series (4 N·m torque) |
| Motor operational current | 5 A |
| Power supply | 200 VAC system (3-phase 200–230 VAC) |
| Resolution | Standard (N) |
| Basic structure | Standard, 500 W class, without brake (-1A) |
| Interface type | Standard (S) – differential input, no analog velocity/torque command |
| Contact I/O | 12–24 V (A) |
| Specification | Standard (-N) |
| Option | Connectors included (/CN) |
| Encoder resolution (typical for series) | Up to 2,621,440 pulses/rev (655,360 p/rev after division) |
Detailed Product Overview
The UD1CG3-004N-1AA-2SA-NCN belongs to Yokogawa’s DrvGIII family of intelligent drives developed for the DYNASERV range of direct-drive motors. These motors are outer-rotor type and are widely used in applications requiring high torque at low speed, excellent rigidity, and precise angular positioning without intermediate gearing.
This specific drive is matched to the 4 N·m DM1C motor size. It accepts three-phase 200–230 VAC mains, supplies the motor with the appropriate current (5 A class), and processes high-resolution encoder feedback. The standard interface supports common pulse-train command formats (PLS-SIGN / STEP-DIR, UP-DOWN, or A-B encoder) and provides monitor pulse outputs. Twelve digital inputs and six digital outputs (12–24 V) are available for machine I/O, homing sensors, and end-of-travel signals.
Built-in diagnostic and protection functions monitor power stage, encoder, and communication status. The drive can be configured via serial interface (RS-232C/RS-485) and supports multi-drop networks. The /CN option supplies the mating connectors required for power, motor, encoder, and I/O wiring, simplifying initial installation.
Dimensions, Mounting & Connection Notes
- Installation: Wall-mount or cabinet mounting (typical for DrvGIII series)
- Cooling: Forced-air (built-in fans on higher-power units; confirm exact thermal requirements for the 500 W class)
- Connectors: Power, motor, encoder, and I/O connectors supplied with the /CN option
- Wiring: Follow Yokogawa cable specifications for encoder and motor power to maintain signal integrity and EMC performance

UD1CG3-004N-1AA-2SA-NCN

UD1CG3-004N-1AA-2SA-NCN
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Motor | Yokogawa DYNASERV DM1C series, 4 N·m | Exact motor model must match the -004 torque class |
| Power supply | 3-phase 200–230 VAC (+10 % / –15 %), 50/60 Hz | Separate control power (single-phase 200–230 VAC) may be required |
| Feedback | High-resolution encoder of the matched DM1C motor | Resolution up to 2 621 440 p/rev typical for UD1CG3 |
| Command interface | Pulse train (differential) or contact I/O | Standard “S” interface; no analog velocity/torque input |
| Network | Optional MECHATROLINK-II (not selected on this suffix) | Confirm if network option is needed |
| Connectors | Included (/CN) | Use the supplied connector set for reliable termination |
FAQ
What is the Yokogawa UD1CG3-004N-1AA-2SA-NCN?
It is an Intelligent Drive (servo amplifier) from the DrvGIII series designed to control Yokogawa DYNASERV DM1C direct-drive motors rated at 4 N·m.
Which motors can be used with this drive?
It is specifically matched to the DM1C series motors with 4 N·m continuous torque.
What is the supply voltage?
200 VAC system (three-phase 200–230 VAC).
Does this model include connectors?
Yes. The “/CN” (or -NCN) suffix indicates that a set of connectors is supplied.
What type of command interface does it have?
Standard differential pulse input (S) with 12–24 V contact I/O. It does not include analog velocity/torque command inputs.
Is this a current production model?
DrvGIII series drives are legacy products; availability is typically limited to remaining stock or specialized suppliers. Confirm current support status with Yokogawa or an authorized partner.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626