Description
Core Product Summary
The EPRO PR6423/00R-000 (also referenced as PR642300R-000) is an 8 mm non-contact eddy current displacement transducer from the Emerson EPRO PR6423 series. It is designed for critical turbomachinery applications and measures radial and axial shaft displacement, position, eccentricity and vibration without contacting the rotor surface.
The sensor features a reverse-mount configuration and is intended for use with a matching signal converter (such as CON011, CON021 or CON041) to form a complete measurement chain. It is commonly applied on steam turbines, gas turbines, compressors, hydro turbines, blowers and fans, and complies with relevant industry standards including API 670.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Non-contact eddy current displacement transducer |
| Series | PR6423 |
| Tip diameter | 8 mm |
| Measuring range (static) | ±1.0 mm (0.04 in) |
| Measuring range (dynamic) | 0 to 500 μm (0 to 20 mil) |
| Best suited range | 50 to 500 μm (2 to 20 mil) |
| Sensitivity | 8 V/mm |
| Nominal gap (center of range) | 1.5 mm (0.06 in) |
| Linearity error (after calibration) | < ±1 % |
| Operating temperature (sensor) | –35 °C to +180 °C (short-term up to +200 °C) |
| Storage temperature | –40 °C to +70 °C |
| Thread options | M10 × 1 or 3/8”-24 UNF-2A |
| Minimum shaft diameter | > 25 mm (0.98 in) |
| Target material | Electrically conducting steel (cylindrical shaft) |
| Protection / approvals | Meets DIN 45670, ISO 10817-1, API 670; Eex ib IIC T6/T4 |
Detailed Product Overview
The PR6423/00R-000 is a rugged eddy-current proximity probe engineered for continuous monitoring of shaft motion on sleeve-bearing machines. Because the oil film in a sleeve bearing attenuates vibration transmitted to the bearing housing, non-contact measurement of the shaft itself is the preferred method for accurate radial vibration, axial thrust position, eccentricity and differential-expansion monitoring.
The sensor generates a high-frequency electromagnetic field at its tip. Changes in the gap between the tip and the rotating conductive shaft alter the eddy-current losses, which are converted into a proportional voltage signal by an external converter. The reverse-mount (“R”) configuration allows the probe to be installed from the rear of a mounting bracket or bearing housing, which is often advantageous in space-constrained or retrofit applications.
Key performance characteristics include a linear measuring range of ±1.0 mm static / 0–500 μm dynamic, a sensitivity of 8 V/mm, and a temperature capability up to +180 °C (short-term +200 °C). The probe is available with different sleeve lengths, cable lengths, armored or non-armored cable, and either a Lemo connector or open cable ends to match the chosen converter. A complete measurement system always requires a compatible EPRO converter (CON series) and appropriate extension cable if needed.
The design satisfies the requirements of major machinery-protection standards and carries hazardous-area certification, making it suitable for both industrial and classified environments.

PR6423/00R-000
System Compatibility & Integration Requirements
Dimensions, Mounting & Connection Notes
The probe has an 8 mm tip diameter and is supplied with a threaded case (M10 × 1 or 3/8”-24 UNF). Sleeve length and total cable length are defined by the specific order code digits. The reverse-mount version is intended for installation from the rear of the mounting location.
A nominal gap of approximately 1.5 mm places the sensor in the center of its linear range. The probe connects to the converter via a Lemo connector or open cable ends. Proper gap setting, target surface condition and cable routing are essential for measurement accuracy. The complete system weight is low (approximately 0.1 kg for the probe without armored cable).
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Signal converter | CON011, CON021, CON041 (or equivalent) | Required to demodulate the probe signal |
| Target | Electrically conducting steel shaft | Minimum diameter > 25 mm; surface finish critical for accuracy |
| Mounting | Reverse-mount configuration | Thread M10 × 1 or 3/8”-24 UNF |
| Cable / connector | Lemo plug or open ends (configuration dependent) | Armored or non-armored options available |
| Monitoring system | Emerson CSI 6500 / AMS Machinery Health or compatible | Forms part of a full transducer system |
| Standards | API 670, DIN 45670, ISO 10817-1 | Designed to meet these requirements |
FAQ
What is the EPRO PR6423/00R-000?
It is an 8 mm non-contact eddy current displacement sensor (reverse-mount version) used to measure shaft vibration, position and eccentricity on turbomachinery.
What does the “R” in the type code mean?
The “R” designates the reverse-mount mechanical configuration.
What measuring range does it provide?
Static range ±1.0 mm; dynamic range 0 to 500 μm (best performance typically 50–500 μm).
Does the sensor work alone?
No. It requires a matching EPRO signal converter (CON series) to form a complete measurement system.
What temperature range can the sensor withstand?
–35 °C to +180 °C continuous; short-term exposure up to +200 °C is permitted.
Which machines is it typically used on?
Steam turbines, gas turbines, compressors, hydro turbines, blowers, fans and other critical rotating equipment with sleeve bearings.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626