Description
Key Technical Specifications
| Parameter | Value |
| Manufacturer | Schneider Electric / Modicon |
| Product Family | BM-85 Bridge / Multiplexer |
| Model Code | NW-BM85-000 |
| Input Supply Voltage | 115 / 230 V AC nominal (50/60 Hz) |
| Communication Ports | 4x RS-232 serial ports (configurable as Master/Slave), 1x Modbus Plus port |
| Network Architecture | Modbus RTU to Modbus Plus routing gateway |
| Enclosure Mounting | Rack or panel mounting |
| Operating Temperature | 0 to 60°C |
| Net Weight | Approx. 2.27 kg (5.00 lbs) |
Product Introduction & Supply Chain Strategy
The Modicon NW-BM85-000 is a dedicated communication bridge and multiplexer engineered to link multiple Modbus master or slave devices into an integrated Modbus Plus network. It manages complex serial data traffic across four independent RS-232 channels, translating transactions smoothly across the high-speed token-passing Modbus Plus backbone.
Procuring this legacy communication processor as New Surplus ensures long-term operational continuity for established control architectures while controlling Total Cost of Ownership (TCO). Sourcing unverified, second-hand network hardware introduces extreme risks of latent power-supply degradation and internal memory corruption. Stocking factory-pristine surplus components eliminates unexpected communication dropouts, preventing expensive plant outages while bypassing the need for risky full-system retrofits.

NW-BM85-000

NW-BM85-000
Installation & Configuration Guide
1.Pre-Installation (Prep & Safety):Estimated time: 10 mins.
Kill main AC power to the control cabinet using strict lock-out/tag-out (LOTO) protocols. Put on a grounded ESD wrist strap. Document all existing serial port assignments, switch positions, and node addresses before extracting any cables.
2.Removal:Estimated time: 10 mins.
Disconnect the AC power plug, multi-pin RS-232 connectors, and the Modbus Plus trunk cable carefully. Loosen the physical mounting fasteners and slide the legacy NW-BM85-000 unit cleanly out of the rack enclosure.
3.Installation (Clone & Seat):Estimated time: 15 mins.
Verify that any internal configuration jumpers or node address switches on the replacement NW-BM85-000 match the removed device precisely. Mount the unit securely into the cabinet rack and tighten retention hardware to ensure proper chassis grounding. Reconnect all serial harnesses and the Modbus Plus cable securely.
4.Power-On & Testing:Estimated time: 15 mins.
Energize the AC power supply lines. Monitor the front-panel indicator LEDs to confirm processor health, proper token ring traffic on the Modbus Plus port, and active communication polling across the RS-232 serial channels.
Firmware/Software Versions & Upgrade Notes
- Recommended Version: Match the operational configuration profile saved from your legacy network setup, as the module relies on specific serial register routing configurations.
- Compatibility Notes: The NW-BM85-000 features 4 RS-232 ports and a single Modbus Plus port. When planning layout expansions, note that later iterations (such as the NW-BM85C002) introduced dual Modbus Plus ports for redundant token-ring configurations.
- Risk Management: Avoid altering port configurations or flash parameters during active production cycles. Replacing a failed unit with an identical New Surplus module configured to match the exact hardware baseline ensures instant network recovery without software recompilation.
Frequently Asked Questions (FAQ)
Is this Modicon bridge module genuinely new or surplus?
This product is a Brand New Surplus unit. It features original packaging, pristine unoxidized connector pins, and has never been deployed in an active industrial facility. We strictly reject used, pulled, or repaired components.
Why choose New Surplus for legacy Modicon communication hardware?
Older communication multiplexers contain sensitive power regulation circuitry and aging electrolytic components that degrade under continuous thermal stress. Purchasing New Surplus guarantees factory-level component lifespan and dependable data routing.
Can I use the NW-BM85-000 to link multiple Modbus Masters?
Yes. The primary purpose of the BM-85 multiplexer is to allow multiple Modbus master devices to share data across a unified network structure without causing data collisions on serial lines.
What interface cable is required for local configuration?
Configuring or diagnosing the unit typically requires a standard null-modem serial cable (DB9 female to DB9 female) connected to a terminal emulation program running at standard baud parameters (e.g., 9600, 8, N, 1).
What warranty coverage is included with this product?
Every unit is backed by a comprehensive 1-year replacement warranty, validating our strict inbound quality control and electrical testing standards.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626