Description
Core Product Summary (Brand / Model / Key Attributes)
The Yokogawa PW702 is a dedicated AC-to-DC power supply module engineered specifically for deployment within Yokogawa industrial control environments, including CENTUM CS and CENTUM VP Field Control Stations (FCS). Operating as an internal rack power source, it converts standard industrial alternating current into regulated low-voltage direct current rails required by system processors, communication boards, and I/O modules.
The module is engineered to accept a nominal input voltage range of 220 to 240 VAC at 50/60 Hz, delivering a regulated output of +5.1 VDC at up to 29 A (representing a total output capacity of approximately 147.9 W). Housed in a robust slide-in module enclosure tailored for Yokogawa control system racks, the PW702 features built-in overcurrent protection, input line filtering, and solid-state regulation designed to ensure continuous power delivery under demanding process conditions.
Key Technical Specifications
| Parameter | Verified Specification Value |
|---|---|
| Manufacturer | Yokogawa Electric Corporation |
| Model / Part Number | PW702 |
| Product Type | Rack-Mountable AC/DC Power Supply Module |
| System Compatibility | Yokogawa CENTUM CS and CENTUM VP Field Control Stations (FCS) |
| Nominal Input Voltage | 220 to 240 VAC |
| Operating Frequency | 50 / 60 Hz |
| DC Output Voltage & Current | +5.1 VDC / 29 A |
| Maximum Output Power Capacity | 147.9 W |
| Operating Temperature Range | 0°C to 55°C |
| Mounting Style | Rack slide-in module (backplane slot connection) |
Detailed Product Overview
The Yokogawa PW702 power supply module provides regulated system power within Yokogawa automation and distributed control system (DCS) racks. It conditions and distributes low-voltage DC rails from an incoming 220–240 VAC source across the backplane bus, energizing central processing units, controller cards, and associated node architecture.
Designed for continuous industrial operation, the module incorporates robust galvanic isolation barriers between the high-voltage AC mains input and internal low-voltage DC rails to maintain backplane stability. Integrated overvoltage and overcurrent protection circuits safeguard downstream components against grid fluctuations, while filtering circuitry suppresses electrical noise. Its modular slide-in format allows maintenance personnel to replace the power supply unit directly within the rack chassis.

PW702

PW702
Dimensions, Mounting & Connection Notes
The PW702 is built as a standard plug-in slide module designed to insert directly into the dedicated power supply slot of a Yokogawa control node rack. Secure the module using its integrated retaining hardware to ensure complete backplane connector coupling and structural grounding.
Ensure adequate ventilation clearance above and below the module assembly within the cabinet to prevent thermal shutdown under full load conditions. Input AC power lines must be terminated securely with proper strain relief, maintaining physical separation from sensitive low-voltage signal cabling.
Engineering Selection Highlights
- Direct System Rack Integration: Custom-engineered to fit standard Yokogawa CENTUM control system backplanes and Field Control Station (FCS) chassis configurations.
- High-Capacity DC Output: Delivers a stable +5.1 VDC output at 29 A (147.9 W capacity) to support processor-heavy rack configurations.
- Robust Grid Compatibility: Rated for standard 220–240 VAC (50/60 Hz) industrial power distribution networks.
- Galvanic Isolation & Protection: Integrates solid-state isolation barriers alongside built-in overvoltage and overcurrent safeguards.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Rack Chassis | Yokogawa CENTUM CS / CENTUM VP Field Control Station base rack | Must be installed in the designated power supply slot of the rack. |
| Input Power Source | 220–240 VAC, 50/60 Hz single-phase supply | Input lines should be protected by appropriately rated upstream circuit protection. |
| Backplane Interface | Multi-pin direct edge connector | Mates directly with the rack backplane bus upon insertion. |
FAQ
What is the Yokogawa PW702?
The Yokogawa PW702 is a rack-mountable AC/DC power supply module designed for Yokogawa CENTUM CS and CENTUM VP Field Control Station (FCS) hardware.
What is the input voltage rating for the PW702?
The module operates on a nominal input voltage of 220 to 240 VAC at 50/60 Hz.
What are the output voltage and current specifications?
The unit provides a regulated DC output of +5.1 VDC at 29 A, delivering a total power capacity of 147.9 W.
Can the PW702 module be hot-swapped?
Hot-swapping is supported when installed in a redundant dual-power configuration where the secondary power module assumes the full system load without disruption.
Verification & Troubleshooting Notes
- Input Power Verification: If the module fails to power up, confirm that incoming AC voltage at the rack terminals matches the 220–240 VAC specification and that upstream breakers are closed.
- Thermal and Overcurrent Status: If the module trips unexpectedly, inspect for cabinet ventilation blockages or downstream short-circuit conditions that may have triggered internal overcurrent/overvoltage protection.
- Backplane Seating: If system rails experience intermittent voltage drops, power down the rack and verify that the module is fully pushed home and secured against the backplane pin connector.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626